PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

DATA SHEET
Solid State Relay
OCMOS FET
PS7141-2A,PS7141L-2A
8-PIN DIP, 400 V BREAK DOWN VOLTAGE
NORMALLY OPEN TYPE
2-ch Optical Coupled MOS FET
NEPOC Series
DESCRIPTION
The PS7141-2A and PS7141L-2A are solid state relays containing GaAs LEDs on the light emitting side (input
side) and MOS FETs on the output side.
They are suitable for analog signal control because of their low offset and high linearity.
The PS7141L-2A has a surface mount type lead.
FEATURES
• 2 channel type (1 a + 1 a output)
• Low LED operating current (IF = 2 mA)
• Designed for AC/DC switching line changer
• Small package (8-pin DIP)
• Low offset voltage
• Ordering number of taping product : PS7141L-2A-E3, E4: 1 000 pcs/reel
<R> • Pb-Free product
• Safety standards
• UL approved: File No. E72422
• BSI approved: No. 8245/8246
• CSA approved: No. CA 101391
APPLICATIONS
• Exchange equipment
• Measurement equipment
• FA/OA equipment
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10281EJ02V0DS (2nd edition)
Date Published July 2006 NS CP(K)
Printed in Japan
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
1996, 2006


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

PACKAGE DIMENSIONS (in millimeters)
PS7141-2A,PS7141L-2A
9.25±0.5
PS7141-2A
87
12
TOP VIEW
65
34
1. LED Anode
2. LED Cathode
3. LED Anode
4. LED Cathode
5. MOS FET
6. MOS FET
7. MOS FET
8. MOS FET
7.62
6.5±0.5
0.5±0.1
1.34±0.1
0.25 M
2.54
9.25±0.5
0 to 15˚
PS7141L-2A
87
12
TOP VIEW
65
34
1. LED Anode
2. LED Cathode
3. LED Anode
4. LED Cathode
5. MOS FET
6. MOS FET
7. MOS FET
8. MOS FET
6.5±0.5
1.34±0.1
0.25 M
2.54
0.9±0.25
9.60±0.4
2 Data Sheet PN10281EJ02V0DS


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

<R> MARKING EXAMPLE
No. 1 pin
Mark
PS7141-2A
NL601
Country Assembled
Type Number
Assembly Lot
N L 6 01
Week Assembled
Year Assembled
(Last 1 Digit)
In-house Code
(L: Pb-Free)
Rank Code
PS7141-2A,PS7141L-2A
Data Sheet PN10281EJ02V0DS
3


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

PS7141-2A,PS7141L-2A
<R> ORDERING INFORMATION
Part Number
PS7141-2A
PS7141L-2A
PS7141L-2A-E3
PS7141L-2A-E4
Order Number
PS7141-2A-A
PS7141L-2A-A
PS7141L-2A-E3-A
PS7141L-2A-E4-A
Solder Plating
Specification
Packing Style
Safety Standard Application Part
Approval
Number*1
Pb-Free
Magazine case 50 pcs
Standard products PS7141-2A
(UL, BSI, CSA
Embossed Tape 1 000 pcs/reel approved)
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
Diode
Forward Current (DC)
IF
Reverse Voltage
VR
Power Dissipation
Peak Forward Current *1
PD
IFP
MOS FET Break Down Voltage
VL
Continuous Load Current
Pulse Load Current *2
(AC/DC Connection)
IL
ILP
Power Dissipation
Isolation Voltage *3
PD
BV
Total Power Dissipation
PT
Operating Ambient Temperature
TA
Storage Temperature
Tstg
Ratings
50
5.0
50
1
400
150
300
375
1 500
850
40 to +85
40 to +100
Unit
mA/ch
V
mW/ch
A/ch
V
mA/ch
mA/ch
mW/ch
Vr.m.s.
mW
°C
°C
*1 PW = 100 µs, Duty Cycle = 1%
*2 PW = 100 ms, 1 shot
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-4 shorted together, 5-8 shorted together.
RECOMMENDED OPERATING CONDITIONS (TA = 25°C)
Parameter
LED Operating Current
LED Off Voltage
Symbol
IF
VF
MIN.
2
0
TYP.
10
MAX.
20
0.5
Unit
mA
V
4 Data Sheet PN10281EJ02V0DS


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

PS7141-2A,PS7141L-2A
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Parameter
Diode
Forward Voltage
Reverse Current
MOS FET Off-state Leakage
Current
Output Capacitance
Coupled LED On-state Current
On-state Resistance
Turn-on Time *1, 2
Turn-off Time *1, 2
Isolation Resistance
Isolation Capacitance
Symbol
Conditions
VF IF = 10 mA
IR VR = 5 V
ILoff VD = 400 V
Cout VD = 0 V, f = 1 MHz
IFon IL = 150 mA
Ron1 IF = 10 mA, IL = 10 mA
Ron2 IF = 10 mA, IL = 150 mA, t 10 ms
ton IF = 10 mA, VO = 5 V, RL = 500 ,
toff PW 10 ms
RI-O VI-O = 1.0 kVDC
CI-O V = 0 V, f = 1 MHz
*1 Test Circuit for Switching Time
Pulse Input
IF
VL Input
MIN.
TYP.
1.2
0.03
MAX.
1.4
5.0
1.0
Unit
V
µA
µA
65 pF/ch
2.0 mA
20 30
16 25
0.35 1.0
ms
0.06 0.2
109
1.1 pF/ch
50 %
0
Input monitor
Rin
VO monitor
VO = 5 V
Output
RL
ton
90 %
10 %
toff
<R> *2 The turn-on time and turn-off time are specified as input-pulse width 10 ms.
Be aware that when the device operates with an input-pulse width less than 10 ms, the turn-on time and turn-off
time will increase.
Data Sheet PN10281EJ02V0DS
5


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

PS7141-2A,PS7141L-2A
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
MAXIMUM FORWARD CURRENT vs.
AMBIENT TEMPERATURE
100
MAXIMUM LOAD CURRENT vs.
AMBIENT TEMPERATURE
300
80
200
60
40
100
20
0
–25 0
25 50 7585 100
Ambient Temperature TA (˚C)
FORWARD VOLTAGE vs.
AMBIENT TEMPERATURE
1.8
IF = 50 mA
1.6 30 mA
20 mA
10 mA
1.4 5 mA
1 mA
1.2
1.0
0
–25 0
25 50 7585 100
Ambient Temperature TA (˚C)
OUTPUT CAPACITANCE vs.
APPLIED VOLTAGE
200
f = 1 MHz
150
100
50
0.8
–25
0 25 50 75
Ambient Temperature TA (˚C)
100
OFF-STATE LEAKAGE CURRENT vs.
APPLIED VOLTAGE
10–5
10–6
TA = 85 ˚C
0 20 40 60 80 100 120
Applied Voltage VD (V)
LOAD CURRENT vs. LOAD VOLTAGE
200
IF = 10 mA
100
10–7
25 ˚C
–4.0 –2.0 0 2.0 4.0
10–8
–100
10–9
0
100 200 300 400
Applied Voltage VD (V)
500
Remark The graphs indicate nominal characteristics.
6 Data Sheet PN10281EJ02V0DS
–200
Load Voltage VL (V)


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

NORMALIZED ON-STATE RESISTANCE vs.
AMBIENT TEMPERATURE
3.0
Normalized to 1.0
2.5 at TA = 25 ˚C,
IF = 10 mA,
IL = 10 mA
2.0
1.5
1.0
0.5
0.0
–25
0 25 50 75
Ambient Temperature TA (˚C)
100
TURN-ON TIME vs. FORWARD CURRENT
12
VO = 5 V
10
8
6
4
2
0 5 10 15 20 25 30
Forward Current IF (mA)
TURN-ON TIME DISTRIBUTION
30
n = 50 pcs,
IF = 10 mA,
25 VO = 5 V
20
15
10
5
0
0.3 0.4
Turn-on Time ton (ms)
Remark The graphs indicate nominal characteristics.
PS7141-2A,PS7141L-2A
ON-STATE RESISTANCE DISTRIBUTION
30
n = 50 pcs,
IF = 10 mA,
25 IL = 10 mA
20
15
10
5
0
20 21
On-state Resistance Ron ()
TURN-OFF TIME vs. FORWARD CURRENT
0.30
0.25
VO = 5 V
0.20
0.15
0.10
0.05
0 5 10 15 20 25 30
Forward Current IF (mA)
TURN-OFF TIME DISTRIBUTION
30
n = 50 pcs,
25
IF = 10 mA,
VO = 5 V
20
15
10
5
0
0.04
0.08
Turn-off Time toff (ms)
Data Sheet PN10281EJ02V0DS
7


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

NORMALIZED TURN-ON TIME vs.
AMBIENT TEMPERATURE
3.0
Normalized to 1.0
at TA = 25 ˚C,
2.5 IF = 10 mA,
VO = 5 V
2.0
1.5
1.0
0.5
0.0
–25
0 25 50 75
Ambient Temperature TA (˚C)
100
Remark The graphs indicate nominal characteristics.
PS7141-2A,PS7141L-2A
NORMALIZED TURN-OFF TIME vs.
AMBIENT TEMPERATURE
3.0
Normalized to 1.0
at TA = 25 ˚C,
2.5 IF = 10 mA,
VO = 5 V
2.0
1.5
1.0
0.5
0.0
–25
0 25 50 75
Ambient Temperature TA (˚C)
100
8 Data Sheet PN10281EJ02V0DS


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

TAPING SPECIFICATIONS (in millimeters)
Outline and Dimensions (Tape)
2.0±0.1
4.0±0.1
1.5
+0.1
–0
PS7141-2A,PS7141L-2A
4.5 MAX.
1.55±0.1
12.0±0.1
10.4±0.1
4.0±0.1
0.3
Tape Direction
PS7141L-2A-E3
PS7141L-2A-E4
Outline and Dimensions (Reel)
R 1.0
2.0±0.5
13.0±0.2
21.0±0.8
Packing: 1 000 pcs/reel
Data Sheet PN10281EJ02V0DS
2.0±0.5
17.5±1.0
21.5±1.0
15.9 to 19.4
Outer edge of
flange
9


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

PS7141-2A,PS7141L-2A
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering
• Peak reflow temperature
260°C or below (package surface temperature)
• Time of peak reflow temperature
10 seconds or less
• Time of temperature higher than 220°C
60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows
Three
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
180˚C
120˚C
120±30 s
(preheating)
(heating)
to 10 s
to 60 s
260˚C MAX.
220˚C
Time (s)
(2) Wave soldering
• Temperature
• Time
• Preheating conditions
• Number of times
• Flux
260°C or below (molten solder temperature)
10 seconds or less
120°C or below (package surface temperature)
One
Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)
<R> (3) Soldering by soldering iron
• Peak temperature (lead part temperature) 350°C or below
• Time (each pins)
3 seconds or less
• Flux
Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead.
(b) Please be sure that the temperature of the package would not be heated over 100°C.
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
10 Data Sheet PN10281EJ02V0DS


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

<R> USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.
PS7141-2A,PS7141L-2A
Data Sheet PN10281EJ02V0DS
11


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

PS7141-2A,PS7141L-2A
The information in this document is current as of July, 2006. The information is subject to change
without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or
data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all
products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
12 Data Sheet PN10281EJ02V0DS


PS7141-2A (Renesas)
2-ch Optical Coupled MOS FET

No Preview Available !

Click to Download PDF File for PC

PS7141-2A,PS7141L-2A
Caution
GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
For further information, please contact
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: contact@ncsd-hk.necel.com
Hong Kong Head Office TEL: +852-3107-7303 FAX: +852-3107-7309
Taipei Branch Office
TEL: +886-2-8712-0478 FAX: +886-2-2545-3859
Korea Branch Office
TEL: +82-2-558-2120 FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH http://www.eu.necel.com/
TEL: +49-211-6503-0
FAX: +49-211-6503-1327
California Eastern Laboratories, Inc. http://www.cel.com/
TEL: +1-408-988-3500
FAX: +1-408-988-0279
Compound Semiconductor Devices Division
NEC Electronics Corporation
URL: http://www.ncsd.necel.com/
0604




PS7141-2A.pdf
Click to Download PDF File