TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

SPEC
Spec No. TQ3C-8EA00-E1DES05-00
Date
September 16, 2009
TYPE : TCG150XGLBB-C00
< 15.0 inch XGA transmissive color TFT
with touch panel >
CONTENTS
1. Application
2. Mechanical specifications
3. Absolute maximum ratings
4. Electrical characteristics
5. Optical characteristics
6. Lot number identification
7. Warranty
8. Reliability test data
9. Inspection
10. Outline drawing
Original
Issue Date
KYOCERA CORPORATION
KAGOSHIMA HAYATO PLANT
LCD DIVISION
This specification is subject to change without notice.
Consult Kyocera before ordering.
Designed by: Engineering dept.
Confirmed by: QA dept.
Prepared
Checked
Approved
Checked
Approved
September 16, 2009


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
TQ3C-8EA00-E1DES05-00
Part No.
TCG150XGLBB-C00
Page
-
Warning
1. This Kyocera LCD module has been specifically designed for use only in
electronic devices and industrial machines in the area of audio control,
office automation, industrial control, home appliances, etc. The module
should not be used in applications where the highest level of safety and
reliability are required and module failure or malfunction of such module
results in physical harm or loss of life, as well as enormous damage or loss.
Such fields of applications include, without limitation, medical, aerospace,
communications infrastructure, atomic energy control. Kyocera expressly
disclaims any and all liability resulting in any way to the use of the module
in such applications.
2. Customer agrees to indemnify, defend and hold Kyocera harmless
from and against any and all actions, claims, damages, liabilities,
awards, costs, and expenses, including legal expenses, resulting from or
arising out of Customer's use, or sale for use, or Kyocera modules in
applications.


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Date
Spec No.
TQ3C-8EA00-E1DES05-00
Part No.
TCG150XGLBB-C00
Page
-
Revision record
Designed by : Engineering dept.
Prepared
Checked
Approved
Confirmed by : QA dept.
Checked Approved
Rev.No.
Date
Page
Descriptions


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
TQ3C-8EA00-E1DES05-00
Part No.
TCG150XGLBB-C00
1. Application
This document defines the specification of TCG150XGLBB-C00. (RoHS Compliant)
Page
1
This specification consists of LCD section and Touch panel section, and each section defines
the LCD and the touch panel separately.
Please refer the corresponding section for each part.
(The product is ROHS compliant)
LCD with touch panel
Type
Spec.No.
TCG150XGLBB-C00
TQ3C-8EA00-E1DES05-00
LCD
Type
Spec. No.
Inspection spec. No.
TCG150XGLBA-A00
TQ3C-8EA00-E1DES04-00
-
Touch panel
Type
Spec. No.
Inspection spec. No.
KTP150AGAC-C00
TQ3C-8EA00-E1BYD02-01
-
2. Mechanical specifications
Item
Specification
Outline dimensions 1)
326.5 (W) × 253.5 (H) × 14.54 (D)
Active area
Please refer to the LCD specification
Mass
(TBD)
1) Projection not included. Please refer to outline for details.
3. Absolute maximum ratings
3-1. Electrical absolute maximum ratings
Please refer to the individual LCD and Touch Panel specifications.
3-2. Environmental absolute maximum ratings
Please refer to the individual LCD and Touch Panel specifications.
4. Electrical characteristics
Please refer to the individual LCD and Touch Panel specifications.
Unit
mm
mm
g
5. Optical characteristics
Item
Brightness
Symbol
LWH
Condition
IF=80mA/1LED
line (center point)
Min.
(240)
Typ.
(280)
Temp. = 25°C
Max.
Unit
- cd/m2
1 Please refer to the LCD specification for measuring conditions and other optical
characteristics.
M426090


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
TQ3C-8EA00-E1DES05-00
Part No.
TCG150XGLBB-C00
Page
2
6. Lot number identification
The lot number shall be indicated on the back of the backlight case of each LCD.
TCG150XGLBB-C00 - □□ - □□ - MADE IN □□□□□
↓↓ ↓ ↓
12 3 4
5
No1. - No5. above indicate
1. Year code
2. Month code
3. Date
4. Version Number
5. Country of origin (Japan or China)
Year
Code
2009
9
Month
Code
Jan.
1
Month
Code
Jul.
7
2010
0
Feb.
2
Aug.
8
2011
1
Mar.
3
Sep.
9
2012
2
Apr.
4
Oct.
X
2013
3
May
5
Nov.
Y
2014
4
Jun.
6
Dec.
Z
7. Warranty
Please refer to the LCD specification.
8. Reliability test data
Please refer to the LCD specification.
9. Inspection
Please refer to the individual LCD and Touch Panel specifications
M426090


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC



TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC



TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC



TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

SPEC
Spec No. TQ3C-8EA00-E1DES04-00
Date
August 24, 2009
TYPE : TCG150XGLBA-A00
< 15.0 inch XGA transmissive color TFT with LED backlight>
CONTENTS
1. General Description
2. Functional Block Diagram
3. Absolute Maximum Ratings
4. Electrical Characteristics
5. Signal Characteristic
6. Connector & Pin Assignment
7. Reliability Test Criteria
8. Mechanical Characteristics
9. Lot number identification
10. Warranty
11. Operating Precautions
Original
Issue Date
KYOCERA CORPORATION
KAGOSHIMA HAYATO PLANT
LCD DIVISION
This specification is subject to change without notice.
Consult Kyocera before ordering.
Designed by: Engineering dept.
Confirmed by: QA dept.
Prepared
Checked
Approved
Checked
Approved
August 24, 2009


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
TQ3C-8EA00-E1DES04-00
Part No.
TCG150XGLBA-A00
Page
-
Warning
1. This Kyocera LCD module has been specifically designed for use only in
electronic devices and industrial machines in the area of audio control,
office automation, industrial control, home appliances, etc. The module
should not be used in applications where the highest level of safety and
reliability are required and module failure or malfunction of such module
results in physical harm or loss of life, as well as enormous damage or loss.
Such fields of applications include, without limitation, medical, aerospace,
communications infrastructure, atomic energy control. Kyocera expressly
disclaims any and all liability resulting in any way to the use of the module
in such applications.
2. Customer agrees to indemnify, defend and hold Kyocera harmless
from and against any and all actions, claims, damages, liabilities,
awards, costs, and expenses, including legal expenses, resulting from or
arising out of Customer's use, or sale for use, or Kyocera modules in
applications.


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Date
Spec No.
TQ3C-8EA00-E1DES04-00
Part No.
TCG150XGLBA-A00
Page
-
Revision record
Designed by : Engineering dept.
Prepared
Checked
Approved
Confirmed by : QA dept.
Checked Approved
Rev.No.
Date
Page
Descriptions


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

1. General Description
Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
1
TCG150XGLBA-A00 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a
driver circuit, and a backlight system. The screen format is intended to support XGA (1024(H) x
768(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). All input signals are LVDS
interface compatible. All design rules of this module can correspond to PSWG standard.
TCG150XGLBA-A00 is designed for industrial display applications
.
1-1. Display Characteristics
The following items are characteristics summary on the table under 25condition:
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
2
1-2. Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature):
Note 1: Measurement method
Equipment: Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or
equivalent)
Aperture
1 with 50cm viewing distance
Test Point
Center
Environment < 1 lux
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
3
Note 2: Definition of 5 points position (Display active area: 246mm (H) x 184.5mm (V))
Note 3:
The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the
maximum test point luminance
Note 4 Definition of contrast ratio (CR):
Note 5: Definition of response time:
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Note 6: Definition of response time:
Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
4
The output signals of photo detector are measured when the input signals are changed from “White”
to “Black”(falling time) and from “Black” to “White” (rising time), respectively. The response time
interval is between 10% and 90% of amplitudes. Please refer to the figure as below.
Note 7: Definition of viewing angle
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180
horizontal and 180 vertical range (off-normal viewing angles). The 180° viewing angle range is
broken down as below: 90° (θ)horizontal left and right, and 90° (Φ) vertical high (up) and low (down).
The measurement direction is typically perpendicular to the display surface with the screen rotated to
its center to develop the desired measurement viewing angle.
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
2. Functional Block Diagram
Page
5
The following diagram shows the functional block of the 15 inch color TFT/LCD module:
LED Driver
LED
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
3. Absolute Maximum Ratings
Page
6
3-1. Absolute Ratings of TFT LCD Module
3-2. Absolute Ratings of Environment
Note: Maximum Wet-Bulb should be 39 and no condensation.
* 65 oC is panel surface temperature
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
4. Electrical Characteristics
4-1. TFT LCD Module
Page
7
4-1-1. Power Specification
Note 1: Measurement condition:
4-1-2. Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
8
Note: LVDS Signal Waveform.
4-2. Backlight Unit
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
9
4-2-1. Parameter guideline for LED
Following characteristics are measured under stable condition using a LED driving board at 25
(Room Temperafure)
Note 1: Ta means ambient temperature of TFT-LCD module.
Note 2: If TCG150XGLBA-A00 module is driven by high current or at high ambient temperature &
humidity condition. The operating life will be reduced.
Note 3: Operating life means brightness goes down to 50% initial brightness. Typical operating life
time is estimated data.
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
5.Signal Characteristic
Page
10
5-1. Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel format.
5-2. Scanning Direction
The following figures show the image seen from the front view. The arrow indicates the direction of
scan.
Fig.1 Normal scan (Pin4, REV = Low or NC)
Fig.2 Reverse scan (Pin4, REV = High)
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

5-3. Signal Description
Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
11
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is
a differential signal technology for LCD interface and high speed data transfer device. Transmitter
shal be SN75LVDS83(negative edge sampling) or compatible. The first LVDS port(RxOxxx)
transmits odd pixels while the second LVDS port(RxExxx) transmits even pixels.
Note 1: Input Signals shall be in low status when VDD is off.
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

5-4. The Input Data Format
5-4-1. SEL68
Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
12
Note1: Please follow PSWG.
Note2: R/G/B data7:MSB, R/G/B data0:LSB
Note: Output signals from any system shall be low or Hi-Z state when VDD is off.
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

5-5. Interface Timing
5-5-1. Timing Characteristics
Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
13
Note: Frame rate is 60 Hz.
Note: DE mode.
Note : Typical value refer to VESA STANDARD
5-5-2. Input Timing Diagram
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

5-6. Power ON/OFF Sequence
Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
14
VDD power and backlight on/off sequence is as below. Interface signals are also shown in the chart.
Signals from any system shall be Hi-Z state or low level when VDD is off.
The above on/off sequence should be applied to avoid abnormal function in the display. Please make
sure to turn off the power when you plug the cable into the input connector or pull the cable out of the
connector.
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
15
6. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
6-1. TFT LCD Signal (CN1): LVDS Connector
6.1.1 Connector Illustration
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

6.2 Backlight Unit: LED Connector
Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
Page
16
6.3 LED Connector Pin Assignment
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
7. Reliability Test Criteria
Page
17
Note1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost
Self-recoverable. No hardware failures.
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
8. Mechanical Characteristics
Page
18
8-1. LCM Outline Dimension (Front View)
8-2. LCM Outline Dimension (Rear View)
M400180


TCG150XGLBB-C00 (Kyocera)
XGA transmissive color TFT

No Preview Available !

Click to Download PDF File for PC

Spec No.
Part No.
TQ3C-8EA00-E1DES04-00 TCG150XGLBA-A00
9. Lot number identification
Page
19
The lot number shall be indicated on the back of the backlight case of each LCD.
TCG150XGLBA-A00 - □□ - □□ - MADE IN □□□□□
↓↓ ↓ ↓
12 3 4
5
No1. - No5. above indicate
1. Year code
2. Month code
3. Date
4. Version Number
5. Country of origin (TBD)
Year
Code
2009
9
Month
Code
Jan.
1
Month
Code
Jul.
7
2010
0
Feb.
2
Aug.
8
2011
1
Mar.
3
Sep.
9
2012
2
Apr.
4
Oct.
X
2013
3
May
5
Nov.
Y
2014
4
Jun.
6
Dec.
Z
10. Warranty
10-1. Incoming inspection
Please inspect the LCD within one month after your receipt.
10-2. Production warranty
Kyocera warrants its LCD’s for a period of 12 months from the ship date. Kyocera shall, by mutual
agreement, replace or re-work defective LCD’s that are shown to be Kyocera’s responsibility.
M400180




TCG150XGLBB-C00.pdf
Click to Download PDF File