G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
(V ) Preliminary Specifications
( ) Final Specifications
Module
Model Name
10.4 Inch Color TFT-LCD
G104SN03 V1
G104SN03 V1
Customer
Date
Approved by
Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
2006/11/23
Prepared by
2006/11/23
General Display Business Division /
AU Optronics corporation
G104SN03 V1 rev.0.1
1/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
Contents
1. Operating Precautions......................................................................................... 4
2. General Description ............................................................................................. 5
2.1 Display Characteristics ......................................................................................................5
2.2 Optical Characteristics .......................................................................................................6
3. Functional Block Diagram................................................................................... 9
4. Absolute Maximum Ratings .............................................................................. 10
4.1 Absolute Ratings of TFT LCD Module..............................................................................10
4.2 Absolute Ratings of Environment .....................................................................................10
5. Electrical Characteristics .................................................................................. 11
5.1 TFT LCD Module.............................................................................................................. 11
5.2 Backlight Unit ...................................................................................................................13
6. Signal Characteristic ......................................................................................... 14
6.1 Pixel Format Image ..........................................................................................................14
6.2 Scanning Direction ...........................................................................................................14
6.3 Signal Description ............................................................................................................15
6.4 The Input Data Format .....................................................................................................16
6.5 Interface Timing................................................................................................................18
6.6 Power ON/OFF Sequence ...............................................................................................19
7. Connector & Pin Assignment ........................................................................... 20
7.1 TFT LCD Module: LVDS Connector .................................................................................20
7.2 Backlight Unit: Lamp Connector.......................................................................................20
7.3 Lamp Connector Pin Assignment .....................................................................................20
8. Reliability Test Criteria ...................................................................................... 21
9. Mechanical Characteristics............................................................................... 22
9.1 LCM Outline Dimension (Front View)...............................................................................22
9.2 LCM Outline Dimension (Rear View) ...............................................................................22
10. Label and Packaging........................................................................................ 24
10.1 Shipping Label (on the rear side of TFT-LCD display)...................................................24
10.2 Carton Package .............................................................................................................24
11 Safety.................................................................................................................. 25
11.1 Sharp Edge Requirements .............................................................................................25
11.2 Materials.........................................................................................................................25
11.3 Capacitors ......................................................................................................................25
11.4 National Test Lab Requirement ......................................................................................25
G104SN03 V1 rev.0.1
2/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Record of Revision
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
Version and Date Page
Old description
0.1 Nov 23, 2006 All First draft specification
New Description
-
G104SN03 V1 rev.0.1
3/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken out from the
container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CCFL
Reflector edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do not twist nor
bend the TFT Module even momentary. At designing the enclosure, it should be taken into consideration
that no bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local ordinances or
regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be
supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied
exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit (IEC60950 or UL1950).
Do not connect the CCFL in Hazardous Voltage Circuit.
15) Severe temperature condition may result in different luminance, response time and lamp ignition voltage.
16) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion
and reduce luminance dramatically.
17) The data on this specification sheet is applicable when LCD module is placed in landscape position.
18)Continuous displaying fixed pattern may induce image sticking. Its recommended to use screen saver or shuffle
content periodically if fixed pattern is displayed on the screen.
G104SN03 V1 rev.0.1
4/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
2. General Description
G104SN03 V1 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a driver circuit, and
a backlight system. The screen format is intended to support SVGA (800(H) x 600(V)) screen and 16.8M (RGB
8-bits) or 262K colors (RGB 6-bits). All input signals are LVDS interface compatible. Inverter card of backlight is
not included.
G104SN03 V1 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Arrangement
Display Mode
Nominal Input Voltage VDD
Typical Power Consumption
Weight
Physical Size
Electrical Interface
Surface Treatment
Unit
[inch]
[mm]
[mm]
[Volt]
[Watt]
[Grams]
[mm]
Specifications
10.4
211.2(H) x 158.4(V)
800x3(RGB) x 600
0.264 x 0.264
R.G.B. Vertical Stripe
TN, Normally White
3.3 typ.
4.26W (IRCFL=5.0mA)
3.56W (IRCFL=3.8mA)
All black pattern
300g(typ.)
236.0(H)x 174.3(V) x 5.6(D) (typ.)
1 channel LVDS
Anti-glare, Hardness 3H
Support Color
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
16.8M / 262K colors
[oC] -20 to +70
[oC] -30 to +80
RoHS Compliance
G104SN03 V1 rev.0.1
5/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25(Room Temperature):
Item
Unit
Conditions
Min. Typ. Max.
White Luminance
[cd/m2]
IRCFL= 4.5mA
(center point)
200 230
-
Uniformity
% TBD
--
Contrast Ratio
Response Time
[msec]
[msec]
[msec]
Rising
Falling
Rising + Falling
400 500
-
- 10 20
- 25 30
- 35 50
Viewing Angle
Color / Chromaticity
Coordinates
(CIE 1931)
[degree]
[degree]
[degree]
[degree]
Horizontal (Right)
CR = 10 (Left)
Vertical
CR = 10
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
(Upper)
(Lower)
60
60
45
55
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
70
70
55
65
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
-
-
-
-
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
Color Gamut
%
45 -
Note
1
2
3
4
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
1with 50cm viewing distance
Test Point Center
Environment < 1 lux
LCD Module
SR_3 or
equivalent
Measuring distance
Module Driving Equipment
G104SN03 V1 rev.0.1
6/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
Note 2Definition of contrast ratio (CR):
Brightness on the Whitestate
Contrast ratio (CR)=
Note 3: Definition of response time:
Brightness on the Blackstate
G104SN03 V1
The output signals of photo detector are measured when the input signals are changed from Whiteto Black
(falling time) and from Blackto White(rising time), respectively. The response time interval is between 10% and
90% of amplitudes. Please refer to the figure as below.
% Tf
Optical
response
100
90
10
0
White
Black
Tr
White
G104SN03 V1 rev.0.1
7/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
Note 4. Definition of viewing angle
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and 180°
vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ)
horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically
perpendicular to the display surface with the screen rotated to its center to develop the desired measurement
viewing angle.
G104SN03 V1 rev.0.1
8/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
3. Functional Block Diagram
The following diagram shows the functional block of the 10.4 inch color TFT/LCD module:
G104SN03 V1
G104SN03 V1 rev.0.1
9/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item
Logic/LCD Drive
Symbol
Vin
Min
-0.3
Max
+4.0
Unit
[Volt]
4.2 Absolute Ratings of Environment
Item
Symbol
Min
Max
Operating Temperature
TOP
-20
+70
Operation Humidity
HOP
5
95
Storage Temperature
TST
-30
+80
Storage Humidity
HST
5
95
Note: Maximum Wet-Bulb should be 39and no condensation.
Unit
[oC]
[%RH]
[oC]
[%RH]
G104SN03 V1
G104SN03 V1 rev.0.1
10/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
G104SN03 V1
Symbol
VDD
Parameter
Logic/LCD Drive
Voltage
IDD VDD Current
Irush LCD Inrush Current
PDD VDD Power
VDDrp
Allowable Logic/LCD
Drive Ripple Voltage
Min Typ Max Units
Remark
3.0 3.3 3.6 [Volt]
All Black Pattern
-
TBD
- [mA]
(VDD=3.3V, at 60Hz)
- - TBD [A] Note 1
All Black Pattern
-
TBD
- [Watt] (VDD=3.3V, at 60Hz)
All Black Pattern
-
-
TBD
[mV]
p-p (VDD=3.3V, at 60Hz)
Note 1: Measurement condition:
+3.3V
(High to Low)
Control
Signal
SW1
SW MAG-SPST
+12.0V
R2
1K
C2
1uF/25V
R1
47K
R2
1K
VR1
47K
Q3
AO6402
D6
D5
D2
D1
S
Q3
AO6402
G
C3
0.01uF/25V
F1
VCVCDD
C1
1uF/16V
(LCD Module Input)
90%
3.3V
10%
0V
0.47ms+ 10%
VDD rising time
G104SN03 V1 rev.0.1
11/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
G104SN03 V1
Symbol
Item
VTH Differential Input High Threshold
Min. Typ. Max. Unit
Remark
- - 100 [mV] VCM=1.25V
VTL Differential Input Low Threshold
100 -
- [mV] VCM=1.25V
VIDInput Differential Voltage
130 350 450 [mV]
VICM Differential Input Common Mode Voltage TBD - TBD [V] VTH/VTL=+-100mV
Note: LVDS Signal Waveform.
G104SN03 V1 rev.0.1
12/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
5.2 Backlight Unit
5.2.1 Parameter guideline for CCFL
Following characteristics are measured under a stable condition using an inverter at 25(Room Temperature):
Symbol
Parameter
IRCFL CCFL operation range
FCFL
ViCFL
(-20oC)
(reference)
ViCFL
(25oC)
(reference)
CCFL Frequency
CCFL Ignition Voltage
CCFL Ignition Voltage
VCFL CCFL Discharge Voltage
PCFL
CCFL Power consumption
(inverter excluded)
Lamp Life
Min.
3.0
40
-
-
510
-
Typ.
4.5
60
-
-
560
2.52
30,000
Max.
5.5
65
TBD
TBD
610
-
Unit
[mA]
rms
[KHz]
Remark
(Ta=25oC) Note 1, 2
(Ta=25oC) Note 3
[Volt]
rms
(Ta= -20oC)
[Volt]
rms
[Volt]
rms
[Watt]
Hrs
(Ta=25oC)
(Ta=25oC) Note 4
IRCFL=5mA
(Ta=25oC) Note 4
IRCFL=5mA
(Ta=25oC) Note 2
IRCFL = 4.5mA
Note 1: IRCFL is defined as the return current of an inverter. (In Figure. 1)
+ Hi
Inverter
-
Lamp
mA Lo
(Figure. 1: Measurement of return current)
A stable IRCFL is a current without flicker or biasing waveform provided by inverter that ensures the
backlight perform to its specification. The ideal sine waveform should be symmetric in positive and negative
polarities and the asymmetry rate of the inverter waveform should be below 10%.
It is recommended to use the inverter with detection circuit to avoid overvoltage, overcurrent, or
mismatching waveform. The purpose is to avoid current flow into only one of the lamps when the other one
is not in operation.
Note 2: The definition of lamp life means when any of following conditions happen:
a) Luminance falls to 50% or less of the initial value.
b) Normal lighting is no more available (flickering, pink lighting, no lighting, etc.)
c) Lamp voltage or lighting start voltage exceeds the specified value.
Note 3: CCFL frequency should be carefully determined to avoid interference between inverter and TFT LCD.
Higher frequency will induce higher leakage current and further impact lamp life.
Note 4: Calculator value for reference (IRCFLxVCFLx1=PCFL).
Note 5: The display is with dual lamp design, and the CCFL current in above table refers to each lamp
G104SN03 V1 rev.0.1
13/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel format.
G104SN03 V1
12
1st Line R G B R G B
799 800
R GBR GB
600th Line R G B R G B
R GBR GB
6.2 Scanning Direction
The following figures show the image seen from the front view. The arrow indicates the direction of scan.
Fig. 1 Normal scan (Pin4, DPS = Low or NC)
Fig. 2 Reverse scan (Pin4, DPS = High)
G104SN03 V1 rev.0.1
14/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
6.3 Signal Description
The module uses a LVDS receiver embedded in AUOs ASIC. LVDS is a differential signal technology for LCD
interface and a high-speed data transfer device.
(1)Input signal interface
Pin no Symbol
Function
Etc.
1 VCC +3.3 V power supply
2 VCC +3.3 V power supply
3
GND
Ground
4
DPS
Reverse Scan Function [H: Enable; L/NC:Disable]
5
RxIN0-
LVDS receiver signal channel 0
6 RxIN0+
7
GND
Ground
8
RxIN1-
LVDS receiver signal channel 1
9 RxIN1+
10
GND
Ground
11
RxIN2-
LVDS receiver signal channel 2
12 RxIN2+
13
GND
Ground
14
CKIN-
LVDS receiver signal clock
15 CKIN+
16
GND
Ground
17
RxIN3-
LVDS receiver signal channel 3
18 RxIN3+
19
AGMode
Aging Mode setting [H: Aging Mode; L/NC: Normal]
20
SEL68
6/8 bits LVDS input setting [H: 8 bits; L/NC:6 bits]
G104SN03 V1 rev.0.1
15/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
6.4 The Input Data Format
G104SN03 V1
G104SN03 V1 rev.0.1
16/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Signal Name
R7
R6
R5
R4
R3
R2
R1
R0
G7
G6
G5
G4
G3
G2
G1
G0
B7
B6
B5
B4
B3
B2
B1
B0
CLK
DE
VSYNC
HSYNC
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
Description
Red Data 7
Red Data 6
Red Data 5
Red Data 4
Red Data 3
Red Data 2
Red Data 1
Red Data 0
Green Data 7
Green Data 6
Green Data 5
Green Data 4
Green Data 3
Green Data 2
Green Data 1
Green Data 0
Blue Data 7
Blue Data 6
Blue Data 5
Blue Data 4
Blue Data 3
Blue Data 2
Blue Data 1
Blue Data 0
Data Clock
Display Timing
Vertical Sync
Horizontal Sync
Remark
Red-pixel Data
Each red pixels brightness data consists of
these pixel data.
For 8Bits LVDS input
MSB: R7 ; LSB: R0
For 6Bits LVDS input
MSB: R5 ; LSB: R0
Green-pixel Data
Each green pixels brightness data consists of
these pixel data
For 8Bits LVDS input
MSB: G7 ; LSB: G0
For 6Bits LVDS input
MSB: G5 ; LSB: G0
Blue-pixel Data
Each blue pixels brightness data consists of
these pixel data
For 8Bits LVDS input
MSB: B7 ; LSB: B0
For 6Bits LVDS input
MSB: B5 ; LSB: B0
The typical frequency is 40MHz. The signal is
used to strobe the pixel data and DE signals.
All pixel data shall be valid at the falling edge
when
the DE signal is high.
This signal is strobed at the falling edge of CLK.
When the signal is high, the pixel data shall be
valid
to be displayed.
The signal is synchronized to CLK.
The signal is synchronized to CLK.
Note: Output signals from any system shall be low or Hi-Z state when VDD is off.
G104SN03 V1 rev.0.1
17/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
6.5 Interface Timing
6.5.1 Timing Characteristics
DE only mode
Parameter
Clock frequency
Vertical
Section
Period
Active
Blanking
Horizontal
Section
Period
Active
Blanking
Note: Frame rate is 60 Hz.
Symbol
1/ TClock
TV
TVD
TVB
TH
THD
THB
Min. Typ. Max.
30 40
50
628 628 628
600 600 600
28 28
28
960 1056 1060
800 800 800
160 256 260
Unit
MHz
TLine
TClock
6.5.2 Input Timing Diagram
G104SN03 V1
Condition
DOTCLK
Input
Data
DE
DE
TCLOCK
Input Timing Definition ( DE Mode)
Invaild
Data
Pixel
1
Pixel
2
Pixel
3
Pixel
N-1
Pixel
N
Invaild
Data
Pixel
1
THB
TVB
THD
TH
TVD
TV
G104SN03 V1 rev.0.1
18/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
6.6 Power ON/OFF Sequence
VDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any
system shall be Hi-Z state or low level when VDD is off.
T1
90%
Power Supply VDD
10
T2
90%
10%
T5 T6 T7
LVDS Signal
Backlight On
VALID
DATA
T3 T4
Power ON/OFF sequence timing
Parameter
T1
T2
T3
T4
T5
T6
T7
Min.
0.5
0
180
180
0
0
500
Value
Typ.
-
-
-
-
-
-
-
Max.
10
50
-
-
50
10
-
Units
ms
ms
ms
ms
ms
ms
Ms
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn
off the power when you plug the cable into the input connector or pull the cable out of the connector.
G104SN03 V1 rev.0.1
19/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
7. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of accommodating
the following signals and will be following components.
7.1 TFT LCD Module: LVDS Connector
Connector Name / Designation
Manufacturer
Connector Model Number
Adaptable Plug
Signal Connector
Hirose or compatible
HRS DF19G-20S-1C or compatible
HRS DF19-20S-1F or compatible
7.2 Backlight Unit: Lamp Connector
Connector Name / Designation
Manufacturer
Connector Model Number
Mating Model Number
Lamp Connector
JST or compatible
BHSR-02VS-1 or compatible
SM02B-BHSS-1-TB or compatible
7.3 Lamp Connector Pin Assignment
Pin #
2
1
Symbol
L
H
Cable color
White
Pink
Signal Name
CCFL power supply(GND)
CCFL power supply(H.V.)
G104SN03 V1 rev.0.1
20/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
8. Reliability Test Criteria
G104SN03 V1
Items
Temperature
Humidity Bias
High Temperature
Operation
Low Temperature
Operation
Required Condition
40/90%,300Hr
70,300Hr (center point of panel surface)
-20,300Hr
Hot Storage
80,300 hours
Cold Storage
Thermal Shock
Test
-30,300 hours
-20/30 min ,60/30 min ,100cycles, 40minimun ramp rate
Hot Start Test
70/1 Hr min. power on/off per 5 minutes, 5 times
Cold Start Test
Shock Test
(Non-Operating)
-20/1 Hr min. power on/off per 5 minutes, 5 times
50G,20ms,Half-sine wave,(+-X,+-Y,+-Z)
Vibration Test
(Non-Operating)
1.5G, 10~200~10Hz, Sine wave
30mins/axis, 3 direction (X, Y, Z)
On/off test
On/10 sec, Off/10 sec, 30,000 cycles
Note
ESD
Contact : ± 8KV/ operation, Class B
Air : ± 15KV / operation, Class B
Note 1
EMI 30-230 MHz, limit 40 dBu V/m, 230-1000 MHz, limit 47 dBu V/m
Note1: According to EN61000-4-2 , ESD class B: Some performance degradation allowed. No data lost
. Self-recoverable. No hardware failures.
G104SN03 V1 rev.0.1
21/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
9. Mechanical Characteristics
9.1 LCM Outline Dimension (Front View)
G104SN03 V1
9.2 LCM Outline Dimension (Rear View)
G104SN03 V1 rev.0.1
22/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
G104SN03 V1 rev.0.1
23/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
RoHS Compliance
G104SN03 V1
10.2 Carton Package
LCD Module
Anti-Static
Bag
NOTE :
1. Max. Capacity : 30 LCD Modules/Carton.
2. Max. Weight : 13Kg/Carton.
3. Meas : 448 mm*402mm*350mm.
EPP Cushion
Carton
G104SN03 V1 rev.0.1
24/25


G104SN03_V1 (AUO)
LCD Module

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.net
Product Specification
AU OPTRONICS CORPORATION
G104SN03 V1
11 Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are
used, they will be reviewed and approved by the responsible AUO toxicologist.
11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them
from being inserted backwards.
11.4 National Test Lab Requirement
The display module will satisfy all requirements for compliance to:
UL 60950
U.S.A. Information Technology Equipment
G104SN03 V1 rev.0.1
25/25




G104SN03_V1.pdf
Click to Download PDF File