E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

www.DataSheet4U.com
Marketing Bulletin
DATE: May 20, 2003
TO: Affected Customers
FROM: Mark Stoner
RE: Product Termination
To all concerned parties,
This bulletin is to notify all customers of the termination of the following Ecliptek series
effective May 14th, 2003:
Series
E11C1
E13C1
E11C2
E13C2
E31C2
E32C2
Description
Four Pad SMD PECL Oscillator, 5V
Four Pad SMD PECL Oscillator, 3.3V
Six Pad SMD PECL Oscillator, 5V
Six Pad SMD PECL Oscillator, 3.3V
Six Pad SMD PECL VCXO, 5V
Six Pad SMD PECL VCXO, 3.3V
Recommended Replacement
E11J1 or E11W1
E13J1 or E13W1
E11J2 or E11W2
E13J2 or E13W2
E31J2 or E31W2
E32J2 or E32W2
Because of the circumstances surrounding this termination, there will be no end-of-life
policy exercised. The series will be terminated with no purchasing or lifetime buy
window available. All of us at Ecliptek Corporation apologize for any inconvenience this
may have caused and can assure you we are taking measures to insure this will not
happen again in the future.
Best Regards,
Mark W. Stoner
Director of Marketing
Ecliptek Corporation
3545 CADILLAC AVENUE COSTA MESA, CA 92626-1401 (714) 433-1200 Fax (714) 433-1234


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

E11C1 Series
• PECL Output Oscillators
• 5.0V supply voltage
• 4 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
NOTES
E11C1
www.DataSheet4U.com
H 5.1
L 14.2
W 9.85
OSCILLATOR
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
Logic Type
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
20% to 80% of waveform
at 50% of waveform
Load Drive Capability
Logic Control / Additional Output
Enable/Disable Input Voltage
Start Up Time
RMS Phase Jitter
VIL of VCC-1.475VDC Maximum
No Connection
VIH of VCC-1.165VDC Minimum
FJ = 12kHz to 20MHz
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
5.0VDC ±5%
100mA Maximum
100KH
±100ppm, ±50ppm, ±25ppm, or
±20ppm Maximum
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 ±10(%)
50 ±5(%)
50 Ohms into VCC-2.0VDC
No Connect, Enable/Disable, or
Complementary Output
Enables Output
Enables Output
Disables Output: Logic Low,
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E11C1
PACKAGE
CERAMIC
VOLTAGE
5.0V
CLASS
OS65
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 152 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

PART NUMBERING GUIDE
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
E11C1 F 2 C - 155.520M TR
DUTY CYCLE
1=50% ±10%, 2=50% ±5%
www.DataSheet4U.com
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
C=Complementary Output
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin1:ComplementaryOutput,NoConnect,orEnable/Disable
Tolerances = ±0.1
Pin2:CaseGround
Pin3:Output Pin4:SupplyVoltage
TAPE
F
12 ±.1
A
24 ±.3
G
B0*
BC
11.5 ±.1 10.75 ±.1
HJ
1.5 +.1-0 A0*
D
4 ±.2
K
.4 ±.05
EF
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
NOPQ
50 MIN 20.2 MIN 13±.2 40 MIN
T U V QTY/REEL
30.4 MAX 360 MAX 24.4+2-0 1000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Characteristic
Specification
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
minimum (internal crystal only).
Solderability
OBSOLETEMarking Permanency
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E11C1
PACKAGE
CERAMIC
VOLTAGE
5.0V
CLASS
OS65
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 153 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

E11C2 Series
• PECL Output Oscillators
• 5.0V supply voltage
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
E11C2
www.DataSheet4U.com
H 5.1
L 14.2
W 9.85
OSCILLATOR
NOTES
OBSOLETE__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
Logic Type
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
20% to 80% of waveform
at 50% of waveform
Load Drive Capability
Logic Control / Additional Output
Enable/Disable Input Voltage
Start Up Time
RMS Phase Jitter
VIL of VCC-1.475VDC Maximum
No Connection
VIH of VCC-1.165VDC Minimum
FJ = 12kHz to 20MHz
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
5.0VDC ±5%
100mA Maximum
100KH
±100ppm, ±50ppm, ±25ppm, or
±20ppm Maximum
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 ±10(%)
50 ±5(%)
50 Ohms into VCC-2.0VDC
No Connect, Enable/Disable,
Complementary Output, or
Complementary Output and Enable/Disable
Enables Output
Enables Output
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E11C2
PACKAGE
CERAMIC
VOLTAGE
5.0V
CLASS
OS66
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 154 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

PART NUMBERING GUIDE
www.DataSheet4U.com
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
DUTY CYCLE
1=50% ±10%, 2=50% ±5%
E11C2 F 2 C - 155.520M TR
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
D=Complementary Output and Enable/Disable
E=Complementary Output (Alt. Pin Configuration)
C=Complementary Output G=Complementary Output and Enable/Disable
(Alt. Pin Configuration)
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
PIN CONNECTIONS TABLE
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
TAPE
F
12 ±.1
A
24 ±.3
G
B0*
BC
11.5 ±.1 10.75 ±.1
HJ
1.5 +.1-0 A0*
D
4 ±.2
K
.4 ±.05
EF
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
NOPQ
50 MIN 20.2 MIN 13±.2 40 MIN
T U V QTY/REEL
30.4 MAX 360 MAX 24.4+2-0 1000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Characteristic
Specification
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
OBSOLETESolderability
minimum (internal crystal only).
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E11C2
PACKAGE
CERAMIC
VOLTAGE
5.0V
CLASS
OS66
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 155 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

E13C1 Series
• PECL Output Oscillators
• 3.3V supply voltage
• 4 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
NOTES
E13C1
www.DataSheet4U.com
H 5.1
L 14.2
W 9.85
OSCILLATOR
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
Logic Type
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
20% to 80% of waveform
at 50% of waveform
Load Drive Capability
Logic Control / Additional Output
Enable/Disable Input Voltage
Start Up Time
RMS Phase Jitter
VIL of VCC-1.475VDC Maximum
No Connection
VIH of VCC-1.165VDC Minimum
FJ = 12kHz to 20MHz
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
3.3VDC ±5%
75mA Maximum
100KH
±100ppm, ±50ppm, ±25ppm, or
±20ppm Maximum
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 ±10(%)
50 ±5(%)
50 Ohms into VCC-2.0VDC
No Connect, Enable/Disable, or
Complementary Output
Enables Output
Enables Output
Disable Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E13C1
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS63
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 156 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

PART NUMBERING GUIDE
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
E13C1 F 2 C - 155.520M TR
DUTY CYCLE
1=50% ±10%, 2=50% ±5%
www.DataSheet4U.com
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
C=Complementary Output
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin1:ComplementaryOutput,NoConnect,orEnable/Disable
Tolerances = ±0.1
Pin2:CaseGround
Pin3:Output Pin4:SupplyVoltage
TAPE
F
12 ±.1
A
24 ±.3
G
B0*
BC
11.5 ±.1 10.75 ±.1
HJ
1.5 +.1-0 A0*
D
4 ±.2
K
.4 ±.05
EF
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
NOPQ
50 MIN 20.2 MIN 13±.2 40 MIN
T U V QTY/REEL
30.4 MAX 360 MAX 24.4+2-0 1000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Characteristic
Specification
OBSOLETESeal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
minimum (internal crystal only).
Solderability
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E13C1
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS63
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 157 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

E13C2 Series
• PECL Output Oscillators
• 3.3V supply voltage
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
NOTES
E13C2
www.DataSheet4U.com
H 5.1
L 14.2
W 9.85
OSCILLATOR
__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
OBSOLETE_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
_________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
ELECTRICAL SPECIFICATIONS
Frequency Range
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
Logic Type
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Inclusive of Operating Temp Range, Supply Voltage,
Load, and Aging @25°C over 10 years
20% to 80% of waveform
at 50% of waveform
Load Drive Capability
Logic Control / Additional Output
Enable/Disable Input Voltage
Start Up Time
RMS Phase Jitter
VIL of VCC-1.475VDC Maximum
No Connection
VIH of VCC-1.165VDC Minimum
FJ = 12kHz to 20MHz
19.440MHz to 212.500MHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
3.3VDC ±5%
75mA Maximum
100KH
±100ppm, ±50ppm, ±25ppm, or
±20ppm Maximum
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
50 ±10(%)
50 ±5(%)
50 Ohms into VCC-2.0VDC
No Connect, Enable/Disable,
Complementary Output, or
Complementary Output and Enable/Disable
Enables Output
Enables Output
Disables Output: Logic Low
Disables Complementary Output: Logic High
10 mSeconds Maximum
1 pSec Maximum
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E13C2
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS64
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 158 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

PART NUMBERING GUIDE
www.DataSheet4U.com
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over 0°C to +70°C
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
DUTY CYCLE
1=50% ±10%, 2=50% ±5%
E13C2 F 2 C - 155.520M TR
AVAILABLE OPTIONS
Blank=Tubes
TR=Tape and Reel (Standard)
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
A=No Connect
B=Enable/Disable
D=Complementary Output and Enable/Disable
E=Complementary Output (Alt. Pin Configuration)
C=Complementary Output G=Complementary Output and Enable/Disable
(Alt. Pin Configuration)
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
PIN CONNECTIONS TABLE
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
SUGGESTED
SOLDER PAD
LAYOUT
TAPE
F
12 ±.1
A
24 ±.3
G
B0*
BC
11.5 ±.1 10.75 ±.1
HJ
1.5 +.1-0 A0*
D
4 ±.2
K
.4 ±.05
EF
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
NOPQ
50 MIN 20.2 MIN 13±.2 40 MIN
T U V QTY/REEL
30.4 MAX 360 MAX 24.4+2-0 1000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Characteristic
Specification
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
OBSOLETESolderability
minimum (internal crystal only).
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E13C2
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS64
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 159 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

E31C2 Series
• PECL Output VCXO
• 5.0V supply voltage
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
E31C2
www.DataSheet4U.com
H 5.1
L 14.2
W 9.85
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 83.333MHz
Operating Temperature Range
0°C to 70°C or -40°C to 85°C
Storage Temperature Range
Supply Voltage (VCC)
Input Current
OBSOLETE
-55°C to 125°C
5.0VDC ±5%
100mA Maximum
Logic Type
100KH
Frequency Tolerance / Stability
Inclusive of Operating Temp Range, Supply Voltage, ±50ppm, ±25ppm, or
Load, and Aging @25°C over 10 years
±20ppm Maximum
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
20% to 80% of waveform
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
Duty Cycle
at 50% of waveform
50 ±10(%)
50 ±5(%)
Load Drive Capability
Additional Output / Logic Control
50 Ohms into VCC-2.0VDC
No Connect and Single Output
Enable/Disable and Single Output
No Connect and Complementary Output or
Enable/Disable and Complementary Output
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low
Disables Complementary Output: Logic High
Start Up Time
10 mSeconds Maximum
RMS Phase Jitter
FJ = 12kHz to 20MHz
1 pSec Maximum
Absolute Pull Range (APR)
Inclusive of Operating Temp Range, Supply Voltage, ±50ppm Minimum
Load, and Aging @25°C over 10 years
Linearity
20%, 15%, or 10% Maximum
Control Voltage (VC): Test Conditions for APR
Control Voltage Range (VCR)
Center Control Voltage
Transfer Function
2.5VDC ±2.0VDC
0.0VDC to VCC
2.5VDC
Positive Transfer Characteristic
Input Impedance
50kOhms Typical
Modulation Bandwidth
at -3dB with Control Voltage of +2.5VDC
10kHz Minimum
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E31C2
PACKAGE
CERAMIC
VOLTAGE
5.0V
CLASS
OS68
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 188 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
H=±50ppm Maximum over -40°C to +85°C
APR
3=±50ppm Minimum
LINEARITY
A=20%
B=15%
C=10%
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
PART NUMBERING GUIDE
E31C2 F 3 A 2 C - 77.760M TR
www.DataSheet4U.com
AVAILABLE OPTIONS
Blank=Tubes
TR = Tape and Reel (Standard)
FREQUENCY
ADDITIONAL OUTPUT/LOGIC CONTROL
A=No Connect and Single Output
B=Enable/Disable and Single Output
C=No Connect and Complementary Output
D=Enable/Disable and Complementary Output
DUTY CYCLE
1=50 ±10(%), 2=50 ±5(%)
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Voltage Control
Pin 2: Enable/Disable or No Connect
Pin 3: Case Ground
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin 4: Output
Pin 5: Complementary Output or No Connect
Pin 6: Supply Voltage
Tolerances = ±0.1
TAPE
F
12 ±.1
A
24 ±.3
G
B0*
BC
11.5 ±.1 10.75 ±.1
HJ
1.5 +.1-0 A0*
D
4 ±.2
K
.4 ±.05
EF
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
NOPQ
50 MIN 20.2 MIN 13±.2 40 MIN
T U V QTY/REEL
30.4 MAX 360 MAX 24.4+2-0 1000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Characteristic
Specification
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
minimum (internal crystal only).
Solderability
OBSOLETEMarking Permanency
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E31C2
PACKAGE
CERAMIC
VOLTAGE
5.0V
CLASS
OS68
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 189 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

E32C2 Series
• PECL Output VCXO
• 3.3V supply voltage
• 6 pad ceramic SMD package with J-leads
• Stability to 20ppm
• Output Enable/Disable available
• Complementary Output available
• Available on Tape and Reel
E32C2
www.DataSheet4U.com
H 5.1
L 14.2
W 9.85
OSCILLATOR
ELECTRICAL SPECIFICATIONS
Frequency Range
19.440MHz to 83.333MHz
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VCC)
Input Current
OBSOLETE
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
3.3VDC ±5%
75mA Maximum
Logic Type
100KH
Frequency Tolerance / Stability
Inclusive of Operating Temp Range, Supply Voltage, ±50ppm, ±25ppm, or
Load, and Aging @25°C over 10 years
±20ppm Maximum
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
20% to 80% of waveform
VCC-1.025VDC Minimum
VCC-1.620VDC Maximum
2 nSeconds Maximum
Duty Cycle
at 50% of waveform
50 ±10(%)
50 ±5(%)
Load Drive Capability
Additional Output / Logic Control
50 Ohms into VCC-2.0VDC
No Connect and Single Output
Enable/Disable and Single Output
No Connect and Complementary Output or
Enable/Disable and Complementary Output
Enable/Disable Input Voltage
VIL of VCC-1.475VDC Maximum
No Connection
Enables Output
Enables Output
VIH of VCC-1.165VDC Minimum
Disables Output: Logic Low
Disables Complementary Output: Logic High
Start Up Time
10 mSeconds Maximum
RMS Phase Jitter
FJ = 12kHz to 20MHz
1 pSec Maximum
Absolute Pull Range (APR)
Inclusive of Operating Temp Range, Supply Voltage, ±50ppm Minimum
Load, and Aging @25°C over 10 years
Linearity
20%, 15%, or 10% Maximum
Control Voltage (VC): Test Conditions for APR
Control Voltage Range (VCR)
Center Control Voltage
Transfer Function
1.65VDC ±1.35VDC
0.0VDC to VCC
1.65VDC
Positive Transfer Characteristic
Input Impedance
50kOhms Typical
Modulation Bandwidth
at -3dB with Control Voltage of +1.65VDC
10kHz Minimum
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E32C2
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS67
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 190 Specifications subject to change without notice.


E11C1 (ECLIPTEK)
OSCILLATOR

No Preview Available !

Click to Download PDF File for PC

FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
D=±50ppm Maximum over 0°C to +70°C
E=±25ppm Maximum over 0°C to +70°C
F=±20ppm Maximum over 0°C to +70°C
H=±50ppm Maximum over -40°C to +85°C
APR
3=±50ppm Minimum
LINEARITY
A=20%
B=15%
C=10%
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
PART NUMBERING GUIDE
E32C2 F 3 A 2 C - 77.760M TR
www.DataSheet4U.com
AVAILABLE OPTIONS
Blank=Tubes
TR = Tape and Reel (Standard)
FREQUENCY
ADDITIONAL OUTPUT/LOGIC CONTROL
A=No Connect and Single Output
B=Enable/Disable and Single Output
C=No Connect and Complementary Output
D=Enable/Disable and Complementary Output
DUTY CYCLE
1=50 ±10(%), 2=50 ±5(%)
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
Pin 1: Voltage Control
Pin 2: Enable/Disable or No Connect
Pin 3: Case Ground
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Pin 4: Output
Pin 5: Complementary Output or No Connect
Pin 6: Supply Voltage
Tolerances = ±0.1
TAPE
F
12 ±.1
A
24 ±.3
G
B0*
BC
11.5 ±.1 10.75 ±.1
HJ
1.5 +.1-0 A0*
D
4 ±.2
K
.4 ±.05
EF
2±.1
L
K0*
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
REEL
R
2.5 MIN
M
1.5 MIN
S
10 MIN
NOPQ
50 MIN 20.2 MIN 13±.2 40 MIN
T U V QTY/REEL
30.4 MAX 360 MAX 24.4+2-0 1000
*Compliant to EIA 481A
MARKING SPECIFICATIONS
Characteristic
Specification
Seal Integrity
Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds
OBSOLETESolderability
minimum (internal crystal only).
Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.
Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times.
Shock
Random drop on hard wooden plate 3 times from a height
of 20cm.
Vibration
Frequency with an amplitude of 1.5mm sweeping between 10Hz
to 55Hz within 1 minute (approximately) for 2 hours minimum on
each axis (X, Y and Z) for a total of 6 hours.
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
MANUFACTURER
ECLIPTEK CORP.
CATEGORY
OSCILLATOR
SERIES
E32C2
PACKAGE
CERAMIC
VOLTAGE
3.3V
CLASS
OS67
REV.DATE
10/02
800-ECLIPTEK www.ecliptek.com for latest revision 191 Specifications subject to change without notice.




E11C1.pdf
Click to Download PDF File