T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

First Edition
Jan 14, 2002
Final Revision
******
OPTREX LCD Module Technical Specification
T-51513D104JU-FW-A-AA
Checked by (Quality Assurance Div.)
Checked by (Design Engineering Div.)
Table of Contents
Prepared by (Production Div.)
1. Overview.................................................................................................................................................. 2
2. Absolute Maximum Ratings........................................................................................................ 3
3. Electrical Characteristics .............................................................................................................. 3
4. Interface Pin Connection .............................................................................................................. 6
5. Interface Timing ................................................................................................................................. 7
6. Block Diagram .................................................................................................................................... 10
7. Mechanical Specification............................................................................................................... 11
8. Optical Characteristics ................................................................................................................ 14
9. Reliability Test Condition.......................................................................................................... 16
10. Inspection Standards...................................................................................................................... 17
11. Handling Precautions for TFT-LCD Module................................................................. 18
Revision History
Rev. Date
Page
Comment
www.DataSheet4U.com
www.DataSheet4U.com
www.DataSheet4U.com
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 1/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

1. OVERVIEW
T-51513-D104JU-FW-A-AA is 10.4” color TFT-LCD (Thin Film Transistor Liquid Crystal
Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data 640 ´ 480, 260K-color images are displayed on the 10.4” diagonal
screen. Input power voltage is single 5.0 V for LCD driving. Both 3.3 V-CMOS and 5.0 V-CMOS
level voltage are acceptable for logic input voltage.
Inverter for backlight is not included in this module. General specifications are summarized in
the following table:
ITEM
Display Area (mm)
Number of Dots
Pixel Pitch (mm)
Color Pixel Arrangement
Display Mode
Number of Color
Wide Viewing Angle Technology
Optimum Viewing Angle(Contrast ratio)
Brightness (cd/m2)
SPECIFICATION
211.2 (H) ´ 158.4 (V)
(10.39-inch diagonal)
640 ´ 3 (H) ´ 480 (V)
0.33 (H) ´ 0.33 (V)
RGB vertical stripe
normally white
260 K
Optical compensation film
12 o’clock
380
Module Size (mm)
Module Mass (g)
Backlight Unit
Surface Treatment
243.0 (W) ´ 181.6 (H) ´ 12.2 (D)
530
CCFL, 2-tubes, replaceable
Anti-glare and hard-coating 3H
Characteristic value without any note is typical value.
The LCD product described in this specification is designed and manufactured for the standard
use in OA equipment and consumer products, such as computers, communication equipment,
industrial robots, AV equipment and so on.
Do not use the LCD product for the equipment that require the extreme high level of reliability,
such as aerospace applications, submarine cables, nuclear power control systems and medical
or other equipment for life support.
ADI assumes no responsibility for any damage resulting from the use of the LCD product in
disregard of the conditions and handling precautions in this specification.
If customers intend to use the LCD product for the above items or other no standard items,
please contact our sales persons in advance.
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 2/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

2. ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL
MIN.
MAX.
UNIT
Power Supply Voltage for LCD
VCC
-0.3
6.5
V
Logic Input Voltage
VI 0 6.5 V
Lamp Voltage
VL
0
2000
Vrms
Lamp Current
IL 0 10.0 mArms
Lamp Frequency
FL -- 80 kHz
Operation Temperature *1)
Top
0
50 °C
Storage Temperature *1)
Tstg -20 60 °C
[Note]
*1) Top,Tstg £ 40°C : 90%RH max. without condensation
Top,Tstg > 40°C : Absolute humidity shall be less than the value of 90%RH at 40°C without
condensation.
3. ELECTRICAL CHARACTERISTICS
(1) TFT- LCD
ITEM
SYMBOL MIN.
Power Supply Voltages for LCD
VCC
4.75
Power Supply Currents for LCD
Permissive Input Ripple Voltage
Logic Input
High
Voltage
Low
ICC
VRP
VIH
VIL
--
--
2.0
0
Ambient Temperature : Ta = 25°C
TYP. MAX. UNIT
Remarks
5.0 5.25
V
Note A)
(See Page 5)
200
--
mA
Note B)
(See Page 6)
-- 100 mVp-p VCC = +5.0V
-- VCC V
-- 0.8 V
(2) Backlight
ITEM
SYMBOL MIN.
Lamp Voltage
Lamp Current
Lamp Frequency
Starting Lamp Voltage
Ta=25°C
Ta=0°C
IL=3.0mArms
Lamp Life Time
IL=6.0mArms
IL=7.0mArms
VL
IL
FL
VS
LT
--
3.0
40
810
1000
50000
40000
30000
TYP.
580
6.0
--
--
--
50000
50000
40000
Ta=25°C
MAX. UNIT Remarks
--
Vrms
IL=6.0mArm
s
7.0 mArms
*1)
80 kHz
*2)
-- Vrms
-- Vrms
-- h
*3)
-- h Continuous
-- h Operation
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 3/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

*1) Lamp Current measurement method (The current meter is inserted in low voltage line.)
CTL
A
LCD
Module
CTH
CTL
CTH
A
Inverter
Power
Supply
*2) Lamp frequency of inverter may produce interference with horizontal synchronous frequency,
and this may cause horizontal beat on the display. Therefore, please adjust lamp frequency, and
keep inverter as far from module as possible or use electronic shielding between inverter and
module to avoid the interference.
*3) Lamp life time is defined as the time either when the brightness becomes 50% of the initial value,
or when the starting lamp voltage does not meet the value specified in this table.
[Note]
A) Power and signals sequence:
t1 £ 10 ms
0 < t2 £ 50 ms
0 < t3 £ 50 ms
0 < t4 £ 50 ms
4.5V
0.6V
400 ms £ t5
200 ms £ t6
0 £ t7
VCC
data
4.5V
0.6V
0.6V
t1 t2
Backlight
t3 t4 t5
t6 t7
data: RGB DATA, DCLK, HD, VD, DENA
,
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 4/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

VCC-dip conditions:
1) When 2.7 V £ VCC < 4.5 V, td £ 10 ms
2) When VCC < 2.7 V
VCC-dip conditions should also follow the power and signals sequence.
VCC
td
B) Typical current condition:
64- gray- bar-pattern
480 line mode
VCC = 5.0V, fH=31.6kHz, fV=60Hz, fCLK= 25MHz
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 5/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

4. INTERFACE PIN CONNECTION
CN 1(INTERFACE SIGNAL)
Used connector: DF9B-31P-1V(Hirose)
Corresponding connector: DF9B-31S-1V(Hirose)
Pin No. Symbol
Function
1 GND
2 DCLK Clock signal for sampling catch data signal
3 HD Horizontal sync signal
4 VD Vertical sync signal
5 GND
6 R0 Red data signal(LSB)
7 R1 Red data signal
8 R2 Red data signal
9 R3 Red data signal
10 R4 Red data signal
11 R5 Red data signal(MSB)
12 GND
13 G0 Green data signal(LSB)
14 G1 Green data signal
15 G2 Green data signal
16 G3 Green data signal
17 G4 Green data signal
18 G5 Green data signal(MSB)
19 GND
20 B0 Blue data signal(LSB)
21 B1 Blue data signal
22 B2 Blue data signal
23 B3 Blue data signal
24 B4 Blue data signal
25 B5 Blue data signal(MSB)
26 GND
27 DENA Data enable signal(to settle the viewing area)
28 VCC 5.0V Power Supply
29 VCC 5.0V Power Supply
30 TEST This pin should be open. Test signal output for only internal test use.
31 TEST This pin should be open. Test signal output for only internal test use.
*1) The shielding case is connected with GND
*2) See; Timing Chart(P9)
CN 2 , CN 3 (BACKLIGHT)
Backlight-side connector: BHR-02(8.0)VS-1N(JST)
Inverter-side connector: SM02(8.0)B-BHS(JST)
Pin No.
Symbol
Function
1
CTH
VBLH High Voltage
3
CTL
VBLL Low Voltage
[Note]
VBLH-VBLL=VL
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 6/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

5. INTERFACE TIMING
(1) Timing Specifications
ITEM
SYMBOL MIN.
TYP.
MAX.
UNIT
Frequency
fCLK
--
25 29 MHz
DCLK Period
*1) *4) Low Width
tCLK
34.5
40
--
ns
tWCL
12
--
-- ns
High Width
DATA *1) Set up time
(R,G,B,DEN
A Hold time
HD, VD)
tWCH
12
--
-- ns
tDS 5 -- -- ns
tDH 5 -- -- ns
Horizontal Active Time
tHA
640
640
640
tCLK
Horizontal Front Porch
tHFP
0
16
-- tCLK
DENA Horizontal Back Porch
tHBP
2
144
--
tCLK
*3) Vertical Active Time
tVA 480 480 480
tH
Vertical Front Porch
tVFP
1
12
--
tH
Vertical Back Porch tVBP 2 33 -- tH
HD
*2)*4)
Frequency
Period
Low Width
fH
tH
tWHL
27
26.3
5
31.6
31.6
96
38
37.0
--
kHz
ms
tCLK
VD
*2)
[Note]
Frequency
Period
Low Width
fV
tV
tWVL
55
14.3
3
60
16.7
--
70
18.2
--
Hz
ms
tH
*1) DATA is latched at fall edge of DCLK in this specification.
*2) Polarities of HD and VD are negative in this specification.
*3) DENA (Data Enable) should always be positive polarity as shown in the timing
specification.
*4) DCLK should appear during all invalid period, and HD should appear during invalid period
of frame cycle.
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 7/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

(2) Timing Chart
a. Pixel Timing Chart
DCLK
tCLK
tWCH
tWCL
2.0V
0.8V
DATA(R,G,B),
DENA, HD, VD
tD
b. Horizontal Timing Chart
tD
2.0V
V0.8V
V
DCLK
DATA
(R,G,B)
DENA
HD
First Data
Invalid Data 1 2 3
tHFP
tHBP
tHA
tWHL
tH=1/fH
639 640 Invalid Data
Last Data
c. Vertical Timing Chart
HD
LINE DATA
DENA
VD
Invalid Data 1 2 3
tVFP
tVBP
tVA
tWVL
tV=1/fV
479 480 Invalid Data
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 8/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

(3) Color Data Assignment
COLOR INPUT
R DATA
G DATA
B DATA
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
DATA MSB
LSB MSB
LSB MSB
LSB
BLACK
000000000000000000
RED(63)
111111000000000000
GREEN(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
BASIC BLUE(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
COLOR CYAN
000000111111111111
MAGENTA 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1
YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
WHITE
111111111111111111
RED(0)
RED (1)
RED(2)
RED
000000000000000000
000001000000000000
000010000000000000
RED (62)
RED(63)
111110000000000000
111111000000000000
GREEN(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN (1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
GREEN(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
GREEN
GREN(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0
GREEN(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
BLUE(0) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
BLUE(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
BLUE(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
BLUE
BLUE(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
BLUE(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
[Note] 1) Definition of gray scale
Color (n) ---n indicates gray scale level.
Higher n means brighter level.
2) Data
1:High, 0: Low
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 9/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

6. BLOCK DIAGLAM
Timing signal
Display data
Timing
Converter
Power
Power
Supply
Circuit
BACKLIGHT
CCFL
G1
G2
G480
TFT-LCD
Driver(source)
CN2, 3
1
3
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 10/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

7. MECHANICAL SPECIFICATIONS
(1) Front Side
T-51513-D104JU-FW-A-AA
Tolerance is ±0.5mm unless noted.
OPTREX CORPORATION
Page 11/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

(2) Rear Side
[Note]
We recommend you referring to the detailed drawing for your design.
Please contact our company sales representative when you need the detailed drawing.
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 12/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

(3) Scanning direction
D(1,1)
D(1,480)
D(640,1)
CN2
CN3
D(640,480)
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 13/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

8. OPTICAL CHARACTERISTICS
Ta=25°C, VCC=5.0V, Input Signals: Typ. Values shown in Section 5
ITEM
SYMBOL CONDITION MIN. TYP. MAX. UNIT Remarks
Contrast Ratio
Luminance
Response Time
Viewing Horizontal
Angle
Vertical
CR
Lw
tr
tf
f
q
q = f = 0°
q = f = 0°
q = f = 0°
q = f = 0°
CR ³ 10
150 300 -- -- *1)*3)
300 380
-- cd/m2 *2)*3)
-- 15 -- ms *3)*4)
-- 35 -- ms *3)*4)
-- -60~60 -- ° *3)
-- -45~55 -- ° *3)
Red Rx
0.54 0.57 0.60
Ry 0.30 0.33 0.36
Color
Green
Coordinates
Gx 0.30 0.33 0.36
Gy
q = f = 0°
0.49 0.52 0.55
--
*3)
Blue
Bx
0.14 0.17 0.20
By 0.15 0.18 0.21
White
Wx
0.29 0.32 0.35
Wy 0.31 0.34 0.37
[Note]
These items are measured using BM-5A(TOPCON) or LCD-7000(Otsuka Electronic) under the dark
room condition (no ambient light).
Condition: IL=6.0mArms, FL= 55 kHz
*1) Definition of Contrast Ratio
CR=ON (White) Luminance / OFF(Black) Luminance: average of 5 points
*2) Definition of Luminance
Lw= ON (White) Luminance: average of 5 points
(1,1) 160 320 480
120 1 2
5
240
34
360
(640,480)
MEASUREMENT POINT
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 14/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

*3) Definition of Viewing Angle( q , f)
*4) Definition of Response Time
White
90%
90%
Luminance
10% Black 10%
tr tf
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 15/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

9. RELIABILITY TEST CONDITION
(1) Temperature and Humidity
TEST ITEM
HIGH TEMPERATURE
HIGH HUMIDITY OPERATION
HIGH TEMPERATURE STORAGE
LOW TEMPERATURE STORAGE
THERMAL SHOCK(NON-OPERATION)
CONDITIONS
40°C, 90%RH, 240 h
60°C, 96 h
-20°C, 96 h
BETWEEN -20°C (1h) and 60°C(1h),
5 CYCLES
(2) Shock & Vibration
ITEM
SHOCK
(NON-
OPERATION)
VIBRATION
(NON-
OPERATION)
CONDITIONS
Shock level: 1470m/s2 (150G)
Waveform: half sinusoidal wave, 2ms
Number of shocks: one shock input in each direction of three mutually
perpendicular axis for a total of six shock inputs
Vibration level: 9.8m/s2 (1.0G)
Waveform: sinusoidal
Frequency range: 5 to 500Hz
Frequency sweep rate: 0.5 octave /min
Duration: one sweep from 5 to 500 Hz in each of three mutually
perpendicular axis(total 3 hours)
(3) Judgment standard
The judgment of the above tests should be made as follow:
Pass: Normal display image with no obvious non-uniformity and no line defect.
Partial transformation of the module parts should be ignored.
Fail: No display image, obvious non-uniformity, or line defects.
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 16/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

10. INSPECTION STANDARDS
Inspection condition is as follows:
Viewing distance is approximately 35cm.
Viewing angle is normal to the LCD panel.
Ambient temperature is approximately 25°C
Ambient light is from 300 to 500 lx.
Bright Dot is defined as follows:
Visible through 5% transmission ND filter under the condition that black image(color 0) is
on the display.
DEFFECT TYPE
LIMIT
POLARIZER
SCRATCH
DENT, BUBBLE
BRIGHT DOT
DARK DOT
TOTAL DOT
0.01 mm £ W £ 0.05 mm, L £ 2 mm, N £ 2
D £ 0.4 mm, N £ 2
N£5
N£5
N£8
DOT DEFECT
TWO ADJACENT DOT
BRIGHT DOT
DARK DOT
THREE OR MORE
ADJACENT DOT
DISTANCE BETWEEN
DEFECTS
DEFECTS
DARK DOT
LINE DEFECT
*1) W: width, L: length, D: diameter, N: number
*2) DEFINITION OF ADJACENT
£ 2 PAIRS
£ 2 PAIRS
NOT ALLOWED
³ 15 mm
³ 15 mm
NOT ALLOWED
RGB RGB RGB
RGB RGB RGB
RGB RGB RGB
Defective Dot
Adjacent Dots
The defects that are not defined above and considered to be problem shall be reviewed and
discussed by both parties.
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 17/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

11. HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Please pay attention to the followings in handling TFT-LCD products;
(1) ASSEMBLY PRECAUTION
a. Please use the mounting hole on the module in installing and do not bending or wrenching LCD
in assembling. And please do not drop, bend or twist LCD module in handling.
b. Please design display housing in accordance with the following guide lines.
(a) Housing case must be designed carefully so as not to put stresses on LCD all sides and not to
wrench module. The stresses may cause non-uniformity even if there is no non-uniformity
statically.
(b) Keep sufficient clearance between LCD module back surface and housing when the LCD
module is mounted. Approximately 1.0mm of the clearance in the design is recommended
taking into account the tolerance of LCD module thickness and mounting structure height on
the housing.
(c) When some parts, such as, FPC cable and ferrite plate, are installed underneath the LCD
module, still sufficient clearance is required, such as 0.5mm. This clearance is, especially, to
be reconsidered when the additional parts are implemented for EMI countermeasure.
(d) Design the inverter location and connector position carefully so as not to give stress to lamp
cable, or not to interface the LCD module by the lamp cable.
(e) Keep sufficient clearance between LCD module and the others parts, such as inverter and
speaker so as not to interface the LCD module. Approximately 1.0mm of the clearance in the
design is recommended.
c. Please do not push or scratch LCD panel surface with anything hard. And do not soil LCD panel
surface by touching with bare hands. (Polarizer film, surface of LCD panel is easy to be flawed.)
d. Please do not press any parts on the rear side such as source TCP, gate TCP, control circuit
board and FPCs during handling LCD module. If pressing rear part is unavoidable, handle the
LCD module with care not to damage them.
e. Please wipe off LCD panel surface with absorbent cotton or soft cloth in case of it being soiled.
f. Please wipe off drops of adhesives like saliva and water on LCD panel surface immediately. They
might damage to cause panel surface variation and color change.
g. Please do not take a LCD module to pieces and reconstruct it. Resolving and reconstructing
modules may cause them not to work well.
h. Please do not touch metal frames with bare hands and soiled gloves. A color change of the metal
frames can happen during a long preservation of soiled LCD modules.
i. Please pay attention to handling lead wire of backlight so that it is not tugged in connecting with
inverter.
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 18/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

j. Please connect the metal frame of LCD module to GND in order to minimize the effect of external
noise and EMI.
k. Be sure to connect the cables and the connectors correctly.
(2) OPERATING PRECAUTIONS
a. Please be sure to turn off the power supply before connecting and disconnecting signal input
cable.
b. Please do not change variable resistance settings in LCD module. They are adjusted to the most
suitable value. If they are changed, it might happen LCD does not satisfy the characteristics
specification.
c. LCD backlight takes longer time to become stable of radiation characteristics in low
temperature than in room temperature.
d. A condensation might happen on the surface and inside of LCD module in case of sudden change
of ambient temperature.
e. Please pay attention not to display the same pattern for very long time. Image might stick on
LCD. Even if image sticking happens, it may disappear as the operation time proceeds.
f. Please obey the same safe instructions as ones being prepared for ordinary electronic products.
(3) PRECAUTIONS WITH ELECTROSTATICS
a. This LCD module use CMOS-IC on circuit board and TFT-LCD panel, and so it is easy to be
affected by electrostatics. Please be careful with electrostatics by the way of your body
connecting to the ground and so on.
b. Please remove protection film very slowly from the surface of LCD module to prevent from
electrostatics occurrence.
(4) STORAGE PRECAUTIONS
a. Please do not leave the LCDs in the environment of high humidity and high temperature such as
60°C90%RH.
b. Please do not leave the LCDs in the environment of low temperature; below -20°C.
(5) SAFETY PRECAUTIONS
a. When you waste damaged or unnecessary LCDs, it is recommended to crush LCDs into pieces
and wash them off with solvents such as acetone and ethanol, which should later be burned.
b. If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash off
thoroughly with soap and water.
c. Be sure to turn off the power supply when inserting or disconnecting the cable.
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 19/20


T-51513D104JU-FW_A_AA (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

d. Inverter should be designed carefully so as not to keep working in case of detecting over
current or open circuit on the lamp.
(6) OTHERS
a. A strong incident light into LCD panel might cause display characteristics changing
inferior because of polarizer film, color filter, and other materials becoming inferior.
Please do not expose LCD module direct sunlight and strong UV rays.
b. Please pay attention to a panel side of LCD module not to contact with other materials in
preserving it alone.
c. For the packaging box, please pay attention to the followings;
(a) Packaging box and inner case for LCD are designed to protect the LCDs from the
damage or scratching during transportation. Please do not open except picking LCDs
up from the box.
(b) Please do not pile them up more than 5 boxes. (They are not designed so.) And please
do not turn over.
(c) Please handle packaging box with care not to give them sudden shock and vibrations.
And also please do not throw them up.
(d) Packaging box and inner case for LCDs are made of cardboard. So please pay
attention not to get them wet. (Such like keeping them in high humidity or wet place
can occur getting them wet.)
T-51513-D104JU-FW-A-AA
OPTREX CORPORATION
Page 20/20




T-51513D104JU-FW_A_AA.pdf
Click to Download PDF File