T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

heet4U.comType No.
LCD Module Technical Specification
First Edition
Dec 23, 2004
Final Revision
******
T-51513D104J-FW-A-AD
www.DataS Approved by (Quality Assurance Division)
Checked by (ACI Engineering Division)
omPrepared by (ACI Engineering Division)
U.cNo. Item
t4-- CONTENTS
e1 APPLICATION
e2 OVERVIEW
h3 ABSOLUTE MAXIMUM RATINGS
S4 ELECTRICAL CHARACTERISTICS
ta5 INTERFACE PIN CONNECTION
a6 INTERFACE TIMING
7 BLOCK DIAGRAM
.D8 MECHANICAL SPECIFICATION
w9 OPTICAL CHARACTERISTICS
10 RELIABILITY TEST CONDITION
ww11 INSPECTION STANDARDS
Page
1
2
3
4
4
7
8
12
13
15
17
18
12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
om-- PACKAGING SPECIFICATION
U.c-- PRODUCTS NUMBER LABELING FORMS
t4-- LAMP UNIT FOR 10.4” VGA
19
22
25
27
www.DataSheeT-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 1/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

1. APPLICATION
This specification applies to color TFT-LCD module, T-51513D104J-FW-A-AD.
These specification papers are the proprietary product of OPTREX and include materials protected
under copyright of OPTREX. No part of this document may be reproduced in any form or by any
means without the express written permission of OPTREX.
OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a product specified in this document. No
license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual
property rights of OPTREX or of others.
OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before
using the product.
(1) Standard Usage
Computers, office equipment, factory automation equipment, test and measurement
equipment, communications, transportation equipment(automobiles, ships, trains, etc.),
provided, however, that operation is not influenced by TFT-LCD directly.
(2) Special Usage
Medical equipment, safety equipment, transportation equipment, provided, however, that
TFT-LCD is necessary to its operation.
(3) Specific Usage
Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control systems,
life support systems and any other equipment. OPTREX should make a contract that
stipulate apportionment of responsibilities between OPTREX and our customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified
in this document. If customers intend to use the product for applications other than those specified
for “Standard Usage”, they should contact OPTREX sales representative in advance.
OPTREX has been making continuous effort to improve the reliability of its products. Customers
should implement sufficient reliability design of their application equipments such as redundant
system design, fail-safe functions, anti-failure features.
OPTREX assumes no responsibility for any damage resulting from the use of the product that does
not comply with the instructions and the precautions specified in this document.
Please contact and consult a OPTREX sales representative for any questions regarding this product.
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 2/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

2. OVERVIEW
T-51513D104J-FW-A-AD is 10.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)
module composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data 640 × 480, 260K-color images are displayed on the 10.4” diagonal
screen. Input power voltages are 3.3 / 5.0V for LCD driving.
The type of data and control signals are digital and transmitted via CMOS interface per Typ. 25
MHz clock cycle.
Inverter for backlight is not included in this module. General specifications are summarized in the
following table:
ITEM
Display Area (mm)
Number of Dots
Pixel Pitch (mm)
Color Pixel Arrangement
Display Mode
Number of Color
Brightness (cd/m2)
SPECIFICATION
211.2(H) × 158.4 (V)
(10.39-inch diagonal)
640 × 3 (H) × 480 (V)
0.33 (H) × 0.33 (V)
RGB vertical stripe
Normally white TN
260K
430
Wide Viewing Angle Technology
Optical compensation film
Viewing Angle (CR 10)
Surface Treatment
-6565° (H) -65~45° (V)
Anti-glare and hard-coating 3H
Electrical Interface
CMOS
Optimum Viewing Angle(Contrast ratio)
6 o’clock
Module Size (mm)
Module Mass (g)
243.0 (W) × 181.6 (H) × 12.2 (D)
540
Backlight Unit
CCFL, 2-tubes, edge-light, replaceable
Characteristic value without any note is typical value.
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 3/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

3. ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL
MIN.
MAX.
UNIT
Power Supply Voltage for LCD
Logic Input Voltage
VCC
VI
0.3 6.5
0 6.5
V
V
Lamp Voltage
VL
0
1500
Vrms
Lamp Current
IL 0 10.0 mArms
Lamp Frequency
FL 30 80 kHz
Operation Temperature (Panel)
Note 1,2)
Top(Panel)
20
70
°C
Operation Temperature (Ambient) Note 2)
Top(Ambient)
20
70
°C
Storage Temperature
Note 2)
Tstg
20 80
°C
[Note]
1) Measured at the center of active area and at the center of panel back surface
2) Top,Tstg 40°C : 90%RH max. without condensation
Top,Tstg > 40°C : Absolute humidity shall be less than the value of 90%RH at 40°C without
condensation.
4. ELECTRICAL CHARACTERISTICS
(1) TFT- LCD
ITEM
Ambient Temperature : Ta = 25°C
SYMBOL MIN. TYP. MAX. UNIT
Remarks
Power Supply
3.3V powered
Voltage for LCD 5.0V powered
Power Supply
3.3V powered
Current for LCD 5.0V powered
Permissive Input Ripple Voltage
VCC
VCC
ICC
ICC
VRP
3.0 3.3 3.6
V
*1)
4.75 5.0 5.25
V
*1)
- 300 450 mA
*2)
- 200 300 mA
*2)
- - 100 mVp-p VCC = +3.3V/5.0V
Logic Input
Voltage
High
Low
*1) Power and signals sequence:
t1 10 ms
0 < t2 50 ms
0 < t3 50 ms
VIH
VIL
400 ms t4
200 ms t5
0 t6
2.0
0
- 5.25 V
- 0.8 V
0.9VCC
LCD Power Supply
Logic Signal
0.1VCC
VCC
data
0.9VCC
0.1VCC 0.1VCC
t1 t2
t3 t4
VL
Backlight Power Supply
t5 t6
data: RGB DATA, DCLK, HD, VD, DENA
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 4/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

VCC-dip conditions:
(a) 3.3 V powered
1) When 2.4 V VCC < 3.0 V, td 10 ms
2) When VCC < 2.4 V
VCC-dip conditions should also follow the power and signals sequence.
VCC
td
(b) 5.0V powered
1) When 3.6 V VCC < 4.5 V, td 10 ms
2) When VCC < 3.6 V
VCC-dip conditions should also follow the power and signals sequence.
VCC
td
*2) Typical current condition:
64- gray- bar-pattern
480 line mode
VCC = + 3.3 / 5.0 V, fH=31.5kHz, fV=60Hz, fCLK= 25MHz
(2) Backlight
ITEM
Lamp Voltage
Lamp Current
Lamp Frequency
Starting Lamp Voltage
Lamp Life Time
SYMBOL
VL
IL
FL
VS
LT
MIN.
--
3.0
40
930
1170
1300
50000
TYP.
480
6.0
--
--
--
--
--
MAX.
--
7.0
80
--
--
--
--
UNIT
Vrms
mArms
kHz
Vrms
Vrms
Vrms
h
Ta=25°C
Remarks
IL=6.0 mArms
*1),*5)
*2)
Ta = 25°C
Ta = 0°C
Ta = 20°C
*3),*4) IL=6.0mArms
Continuous Operation
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 5/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

*1) Lamp Current measurement method (The current meter is inserted in low voltage line.)
CTL
A
LCD
Module
CTH
CTL
CTH
A
Inverter
Power
Supply
*2) Lamp frequency of inverter may produce interference with horizontal synchronous frequency, and
this may cause horizontal beat on the display. Therefore, please adjust lamp frequency, and keep
inverter as far from module as possible or use electronic shielding between inverter and module to
avoid the interference.
*3) Lamp life time is defined as the time either when the brightness becomes 50% of the initial value, or
when the starting lamp voltage does not meet the value specified in this table.
*4) The life time of the backlight depends on the ambient temperature. The life time will decrease under
low/high temperature.
*5) Please use the inverter which has symmetrical current wave form as follows,
The degree of unbalance: less than 10%
The ratio of wave height: less than 2 ±10%
IPH IPH: High side peak The degree of unbalance = |IPH - IPL| / Irms × 100(%)
IPL IPL: Low side peak The ratio of wave height = IPH(or IPL) / Irms
CURRENT WAVE FORM
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 6/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

5. INTERFACE PIN CONNECTION
(1) CN 1(Interface Signal)
Used connector: DF9B-31P-1V(HIROSE)
Corresponding connector: DF9-31S-1V(HIROSE)
Pin No. Symbol
Function
1 GND
2 DCLK Clock signal for sampling catch data signal
3 HD Horizontal sync signal
4 VD Vertical sync signal
5 GND
6 R0 Red data signal(LSB)
7 R1 Red data signal
8 R2 Red data signal
9 R3 Red data signal
10 R4 Red data signal
11 R5 Red data signal(MSB)
12 GND
13 G0 Green data signal(LSB)
14 G1 Green data signal
15 G2 Green data signal
16 G3 Green data signal
17 G4 Green data signal
18 G5 Green data signal(MSB)
19 GND
20 B0 Blue data signal(LSB)
21 B1 Blue data signal
22 B2 Blue data signal
23 B3 Blue data signal
24 B4 Blue data signal
25 B5 Blue data signal(MSB)
26 GND
27 DENA Data enable signal (to settle the viewing area)
28 VCC 3.3 / 5.0 V Power Supply
29 VCC 3.3 / 5.0 V Power Supply
30 TEST This pin should be open. Test signal output for only internal test use.
31 SC Scan direction control (Low or Open=Normal, High=Reverse)
*) The shielding case is connected with GND
(2) CN 2 , CN 3 (Backlight)
Backlight-side connector: BHR-02(8.0)VS-1N(JST)
Inverter-side connector: SM02(8.0)B-BHS(JST)
Pin No.
Symbol
Function
1
CTH
VBLH High Voltage
3 CTL
[Note]
VBLH-VBLL=VL
VBLL Low Voltage
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 7/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

6. INTERFACE TIMING
(1) Timing Specifications
ITEM
SYMBOL MIN.
TYP.
MAX.
UNIT
Frequency
fCLK
--
25 29 MHz
DCLK
Period
Low Width
tCLK
34.5
40
--
ns
tWCL
12
--
--
ns
High Width
tWCH
12
--
--
ns
DATA Set up time
(R,G,B,DENA
HD, VD) Hold time
tDS 5 -- -- ns
tDH 5 -- -- ns
Horizontal Active Time tHA
640
640
640
tCLK
Horizontal Front Porch tHFP
10
16
-- tCLK
Horizontal Back Porch tHBP
2
138
--
tCLK
DENA Vertical Active Time
tVA
480
480
480
tH
Vertical Front Porch
tVFP
1
13 --
tH
Vertical Back Porch
tVBP
2
33 --
tH
Frequency
fH 27 31.5 38 kHz
HD Period
tH 26.3 31.7 37.0
µs
Low Width
tWHL
5
96
-- tCLK
Frequency
fV 55 60 70 Hz
VD Period
tV 14.3 16.7 18.2
ms
[Note]
Low Width
tWVL
3
--
--
tH
1) DATA is latched at fall edge of DCLK in this specification.
2) Polarities of HD and VD are negative in this specification.
3) DENA (Data Enable) should always be positive polarity as shown in the timing specification.
4) DCLK should appear during all invalid period, and HD should appear during invalid period of
frame cycle.
5) tHFP + tHBP 20 tCLK
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 8/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

(2) Timing Chart
a. Pixel Timing Chart
DCLK
DATA(R,G,B),
DENA, HD, VD
tCLK
tWCH
tWCL
2.0V
0.8V
tD tD
b. Horizontal Timing Chart
DCLK
DATA
(R,G,B)
DENA
HD
First Data
Invalid Data 1 2 3
tHFP
tHBP
tHA
639 640 Invalid Data
Last Data
tWHL
tH=1/fH
c. Vertical Timing Chart
HD
LINE DATA
DENA
VD
Invalid Data 1 2 3
tVFP
tVBP
tVA
tWVL
tV=1/fV
479 480 Invalid Data
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 9/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

(3) Color Data Assignment
INPUT DATA
COLOR
R DATA
G DATA
B DATA
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
MSB
LSB MSB
LSB MSB
LSB
BLACK
000000000000000000
RED(63)
111111000000000000
GREEN(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
BASIC BLUE(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
COLOR CYAN
000000111111111111
MAGENTA 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1
YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
WHITE
111111111111111111
RED(1)
000001000000000000
RED(2)
000010000000000000
RED
RED(62)
RED(63)
GREEN(1)
GREEN(2)
111110000000000000
111111000000000000
000000000001000000
000000000010000000
GREEN
GREEN(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0
GREEN(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
BLUE(1)
000000000000000001
BLUE(2)
000000000000000010
BLUE
BLUE(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
BLUE(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
[Note]
1) Definition of gray scale
Color (n) --- n indicates gray scale level.
Higher n means brighter level.
2) Data
1:High, 0: Low
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 10/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

(4) Display Position and Scan Direction
D(X,Y) shows the data number of input signal for LCD panel signal processing PCB.
SC: Low or Open
SC: High
D(1,1)
D(640,1)
CN2
D(640,480)
D(1,480)
CN2
D(1,480)
D(640,480)
CN3
D(640,1)
D(1,1)
CN3
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 11/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

7. BLOCK DIAGRAM
Timing signal
Display data
Timing
Converter
Power
Power
Supply
Circuit
BACKLIGHT
CCFL
G1
G2
G480
TFT-LCD
Driver(source)
CN2, 3
1
3
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 12/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

8. MECHANICAL SPECIFICATIONS
(1) Front Side
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
(Unit:mm)
Page 13/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

(2) Rear Side
[Note]
We recommend you referring to the detailed drawing for your design.
Please contact our company sales representative when you need the detailed drawing.
(Unit:mm)
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 14/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

9. OPTICAL CHARACTERISTICS
Ta=25°C, VCC=3.3 / 5.0 V, Input Signals: Typ. Values shown in Section 6
ITEM
SYMBOL CONDITION MIN. TYP. MAX. UNIT Remarks
Contrast Ratio
CR θ = φ = 0° 350 500
Luminance
Lw θ = φ = 0° 340 430
Luminance Uniformity
Lw
θ = φ = 0°
--
--
-- -- *1)*2)*6)
-- cd/m2 *1)*3)*6)
30 % *1)*4)*6)
Response Time
tr
θ = φ = 0°
--
10
-- ms *1)*5)*6)
tf
θ = φ = 0°
--
30
-- ms *1)*5)*6)
Viewing
Horizontal
Vertical
φ
θ
CR 10
-5050 -6565
-4030 -6545
--
--
° *1)*6)
° *1)*6)
Angle
Horizontal
Vertical
φ
θ
CR 5
-6565 -8080
-5040 -8050
--
--
*1)*6)
*1)*6)
Image Sticking
tis 2 h -- -- 2 s *7)
Red Rx
0.555 0.585 0.615
Ry 0.304 0.334 0.364
Color
Green
Gx
0.300 0.330 0.360
Coordinates
Blue
Gy
0.506 0.536 0.566
--
*1)*6)
Bx
θ = φ = 0°
0.138 0.168 0.198
By 0.143 0.173 0.203
White
Wx
0.300 0.330 0.360
Wy 0.312 0.342 0.372
[Note]
These items are measured using CS1000(MINOLTA) for color coordinates, EZContrast(ELDIM) for
viewing angle and CS1000 or BM-5A(TOPCON) for others under the dark room condition (no ambient
light) after more than 30 minutes from turning on the lamp unless noted.
Condition: IL=6.0 mArms, FL=55 kHz
*1) Measurement Point
Contrast Ratio, Luminance, Response Time, Viewing Angle, Color Coordinates: Display Center
Luminance Uniformity: point 15 shown in a figure below
(1,1) 160 320 480
120 1 2
5
240
34
360
(640,480)
*2) Definition of Contrast Ratio
CR=ON (White) Luminance / OFF(Black) Luminance
*3) Definition of Luminance
Lw= ON (White) Luminance
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 15/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

*4) Definition of Luminance Uniformity
Lw=[Lw(MAX)/Lw(MIN)-1] × 100
*5) Definition of Response Time
White
90%
90%
Luminance
tr
*6) Definition of Viewing Angle( θ , φ)
10% Black 10%
tf
*7) Image Sticking
Continuously display the test pattern shown in the figure below for two-hours. Then display a
completely white screen. The previous image shall not persist more than two seconds at 25°C.
Cols 318-322
Rows 238-242
White
Area
Black
Lines
TEST PATTERN FOR IMAGE STICKING TEST
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 16/32


T-51513D104J-FW-A-AD (OPTREX)
LCD_Module

No Preview Available !

Click to Download PDF File for PC

10. RELIABILITY TEST CONDITION
(1) Temperature and Humidity
TEST ITEM
HIGH TEMPERATURE
HIGH HUMIDITY OPERATION
HIGH TEMPERATURE OPERATION
LOW TEMPERATURE OPERATION
HIGH TEMPERATURE STORAGE
LOW TEMPERATURE STORAGE
THERMAL SHOCK (NON-OPERATION)
CONDITIONS
40°C, 90%RH, 240 h
(No condensation)
70°C, 240 h
20°C, 240 h
80°C, 240 h
20°C, 240 h
BETWEEN 20°C (1h) and 80°C(1h),
100 CYCLES
(2) Shock & Vibration
ITEM
SHOCK
(NON-OPERATION)
CONDITIONS
Shock level: 1470m/s2 (150G)
Waveform: half sinusoidal wave, 2ms
Number of shocks: one shock input in each direction of three mutually
perpendicular axis for a total of six shock inputs
VIBRATION
(NON-OPERATION)
Vibration level: 9.8m/s2 (1.0G)
Waveform: sinusoidal
Frequency range: 5 to 500Hz
Frequency sweep rate: 0.5 octave /min
Duration: one sweep from 5 to 500 Hz in each of three mutually
perpendicular axis(total 3 hours)
(3) Judgment standard
The judgment of the above tests should be made as follow:
Pass: Normal display image, no damage of the display function. (ex. no line defect)
Partial transformation of the module parts should be ignored.
Fail: No display image, damage of the display function. (ex. line defect)
T-51513D104J-FW-A-AD (AD) No. 2004-0193
OPTREX CORPORATION
Page 17/32




T-51513D104J-FW-A-AD.pdf
Click to Download PDF File