Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Features
On-state rms current, IT(RMS) 1 A
Repetitive peak off-state voltage, VDRM/VRRM
600 or 800 V
Triggering gate current, IGT (Q1) 3 to 25 mA
Description
The Z01 series is suitable for general purpose AC
switching applications. These devices are
typically used in applications such as home
appliances (electrovalve, pump, door lock, small
lamp control), fan speed controllers,...
Different gate current sensitivities are available,
allowing optimized performance when driven
directly through microcontrollers.
Z01
Standard 1A Triacs
A2
G
A1
A2
A1
TO-92
Z01xxA
A2
G
G
A2
A1
SOT-223
Z01xxN
A2
A1
G
SMBflat-3L
Z01xxMUF
December 2010
Doc ID 7474 Rev 10
1/12
www.st.com
12


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Characteristics
1 Characteristics
Z01
Table 1.
Symbol
Absolute maximum ratings
Parameter
Value
Unit
IT(RMS)
ITSM
I²t
dI/dt
IGM
PG(AV)
Tstg
Tj
On-state rms current
(full sine wave)
SOT-223
TO-92
SMBflat-3L
Non repetitive surge peak on-state F = 50 Hz
current (full cycle, Tj initial = 25 °C) F = 60 Hz
I²t Value for fusing
tp = 10 ms
Critical rate of rise of on-state current
IG = 2 x IGT , tr 100 ns
F = 120 Hz
Peak gate current
tp = 20 µs
Average gate power dissipation
Storage junction temperature range
Operating junction temperature range
Ttab = 90 °C
TL = 50 °C
Ttab = 107 °C
t = 20 ms
t = 16.7 ms
1
8
8.5
0.35
Tj = 125 °C
20
Tj = 125 °C
Tj = 125 °C
1
1
- 40 to + 150
- 40 to + 125
A
A
A²s
A/µs
A
W
°C
Table 2. Electrical characteristics (Tj = 25 °C, unless otherwise specified)
Symbol Test conditions Quadrant
Z01
03 07 09 10
Unit
IGT (1)
VGT
VGD
IH (2)
VD = 12 V,
RL = 30 Ω
VD = VDRM,
RL = 3.3 kΩ,
Tj = 125 °C
IT = 50 mA
IL IG = 1.2 IGT
I - II - III
IV
ALL
MAX.
MAX.
3
5
5 10
7 10
1.3
25
mA
25
V
ALL MIN. 0.2 V
MAX. 7 10 10 25 mA
I - III - IV
7 10 15 25
MAX.
mA
II 15 20 25 50
dV/dt (2)
VD = 67% VDRM gate open
Tj = 110 °C
MIN.
(dV/dt)c (dI/dt)c = 0.44 A/ms,
(2) Tj = 110 °C
MIN.
1. Minimum IGT is guaranteed at 5% of IGT max.
2. For both polarities of A2 referenced to A1.
10 20
0.5 1
50 100 V/µs
2 5 V/µs
2/12 Doc ID 7474 Rev 10


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Z01 Characteristics
Table 3. Static characteristics
Symbol
Test conditions
VTM(1)
Vto (1)
Rd (1)
ITM = 1.4 A, tp = 380 µs
Threshold voltage
Dynamic resistance
IDRM
IRRM
VDRM = VRRM
1. For both polarities of A2 referenced to A1.
Tj = 25 °C
Tj = 125 °C
Tj = 125 °C
Tj = 25 °C
Tj = 125 °C
MAX.
MAX.
MAX.
MAX.
Table 4.
Symbol
Thermal resistances
Parameter
Rth(j-t)
Rth(j-t)
Rth(j-I)
Junction to tab (AC)
Junction to tab (AC)
Junction to lead (AC)
Rth(j-a) Junction to ambient
1. S = copper surface under tab.
S(1) = 5 cm²
SOT-223
SMBflat-3L
TO-92
SOT-223
SMBflat-3L
TO-92
MAX.
Value
1.6
0.95
400
5
0.5
Unit
V
V
mΩ
µA
mA
Value
25
14
60
60
75
150
Unit
°C/W
Figure 1.
Maximum power dissipation
versus on-state rms current
(full cycle)
Figure 2.
On-state rms current versus lead
(TO-92) or tab (SOT-223, SMBflat-
3L) temperature (full cycle)
P(W)
1.50
α=180 °
1.25
1.00
0.75
0.50
0.25
180°
IT(RMS)(A)
0.00
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
IT(RMS)(A)
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0
25
SOT-223
TO-92
SMBF3L
Tl or Ttab(°C)
50 75
100
125
Doc ID 7474 Rev 10
3/12


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Characteristics
Z01
Figure 3.
On-state rms current versus
ambient temperature (free air
convection full cycle)
IT(RMS)(A)
1.2
1.0 Rth(j-a) = 60°C/W
(SOT-223)
0.8
Rth (j-a) = 100°C/W
(SMBflat-3L)
0.6
Figure 4.
Relative variation of thermal
impedance versus pulse duration
(Zth(j-a))
K=[Zth(j-a)/Rth(j-a)]
1.00
Z01xxA
Z01xxMUF
Copper surface area
= 5cm²
0.10
Z01xxN
0.4 Rth(j-a) = 150°C/W
(TO-92)
0.2
0.0
0
Tamb (°C)
0.01
tp(s)
1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03
25 50 75 100 125
Figure 5.
Relative variation of holding
Figure 6.
current and latching current versus
junction temperature (typ. values)
Relative variation of gate trigger
current (IGT) and voltage (VGT)
versus junction temperature
IH, IL [Tj] /IH, IL [Tj=25°C]
2.5
IGT, VGT[Tj] / IGT, VGT[Tj=25 °C]
3.0
2.0
1.5
1.0
IL
0.5
IH
Tj (°C)
0.0
-50 -25 0 25 50 75 100 125
2.5
IGT Q1-Q2
2.0
IGT Q3
IGT Q4
1.5
1.0 VGT Q1-Q2-Q3-Q4
0.5
0.0
-50
-25
0
Tj(°C)
25 50
75 100 125
Figure 7.
Surge peak on-state current versus Figure 8.
number of cycles
Non-repetitive surge peak
on-state current and corresponding
value of I2t sinusoidal pulse width
9 ITSM(A)
8
7
6
5
4
3
2
Repetitive
1 Tamb = 95 °C
0
1
Non repetitive
Tjinitial = 25 °C
10
T = 20 ms
One cycle
Number of cycles
100 1000
ITSM (A), I2t (A2s)
100.0
dI/dt limitation:
20A/µs
10.0
Tj initial = 25°C
ITSM
1.0
0.1
0.01
tp (ms)
0.10 1.00
I2t
10.00
4/12 Doc ID 7474 Rev 10


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Z01 Characteristics
Figure 9. On-state characteristics
(maximum values) (ITM = f(VTM)
Figure 10. Relative variation of critical rate
of decrease of main current versus
(dV/dt)c
ITM(A)
10.0
Tj = Tjmax.
1.0
Tj = 25°C
Tj=max.
Vt0=0.95 V
Rd=400 mΩ
VTM (V)
0.1
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
(dI/dt)c [(dV/dt)c] / Specified (dI/dt)c
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6 Z0103
0.4 Z0107
0.2 (dV/dt)c (V/µs)
0.0
0.1 1.0 10.0
Z0109
Z0110
100.0
Figure 11. Relative variation of critical rate of
decrease of main current (dI/dt)
versus junction temperature
(dI/dt)c [Tj] / (dI/dt)c [Tj Specified]
6
5
4
3
2
1
Tj (°C)
0
0 25 50 75
100 125
Figure 12. SOT-223 and SMBflat-3L thermal
resistance junction to ambient
versus copper surface under case
Rth(j-a)(°C/W)
170
160
150
140
130
120
110 SMBF3L
100
90
80 SOT223
70
60 SCU(cm²)
50
012345
Figure 13. Relative variation of static dV/dt immunity versus junction temperature (gate open)
dV/dt [Tj] / dV/dt [T j=125 °C]
6
5
VD=VR=402V
4
3
2
1
0 Tj(°C)
25 50 75 100 125
Doc ID 7474 Rev 10
5/12


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Ordering information scheme
2 Ordering information scheme
Z01
Figure 14. Ordering information scheme
Triac series
Current
01 = 1 A
Sensitivity
03 = 3 mA
07 = 5 mA
09 = 10 mA
10 = 25 mA
Voltage
M = 600 V
N = 800 V
Package
A = TO-92
N = SOT-223
UF = SMBF3L
Packing mode
1AA2 = TO-92 bulk
2AL2 = TO-92 ammopack
5AL2 = TO-92 tape and reel
5AA4 = SOT-223 tape and reel 7”
6AA4 = SOT-223 tape and reel 13”
Blank = SMBflat-3L tape and reel 13”
Z 01 03 M A [BLANK] 1AA2
6/12 Doc ID 7474 Rev 10


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Z01 Ordering information scheme
Table 5. Product Selector
Order code
Voltage
600 V 800 V
Z0103MA
Z0103MN
X
X
Z0103NA
Z0103NN
Z0107MA
X
X
X
Z0107MN
Z0107NA
Z0107NN
X
X
X
Z0109MA
Z0109MN
Z0109NA
X
X
X
Z0109NN
Z0110MA
X
X
Z0110MN
Z0110NA
Z0110NN
X
X
X
Z0103MUF
Z0107MUF
Z0109MUF
X
X
X
Sensitivity
3 mA
3 mA
3 mA
3 mA
5 mA
5 mA
5 mA
5 mA
10 mA
10 mA
10 mA
10 mA
25 mA
25 mA
25 mA
25 mA
3 mA
5 mA
10 mA
Type
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Package
TO-92
SOT-223
TO-92
SOT-223
TO-92
SOT-223
TO-92
SOT-223
TO-92
SOT-223
TO-92
SOT-223
TO-92
SOT-223
TO-92
SOT-223
SMBflat-3L
SMBflat-3L
SMBflat-3L
Doc ID 7474 Rev 10
7/12


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Packaging information
3 Packaging information
Z01
Epoxy meets UL94, V0
Lead-free packages
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 6. SOT-223 dimensions
Dimensions
Ref. Millimeters
Inches
A
A1
V
B
e1
c Min. Typ. Max. Min. Typ. Max.
A 1.80 0.071
A1
0.02 0.10
0.001 0.004
D B 0.60 0.70 0.85 0.024 0.027 0.033
B1
B1 2.90 3.00 3.15 0.114 0.118 0.124
HE
4
123
c 0.24 0.26 0.35 0.009 0.010 0.014
D(1) 6.30 6.50 6.70 0.248 0.256 0.264
e 2.3
0.090
e1 4.6
0.181
e E(1) 3.30 3.50 3.70 0.130 0.138 0.146
H 6.70 7.00 7.30 0.264 0.276 0.287
V 10° max
1. Do not include mold flash or protrusions. Mold flash or protrusions shall not exceed 0.15mm (0.006inches)
Figure 15. SOT-223 footprint dimensions (in millimeters)
3.25
1.32
5.16 7.80
8/12
2.30
1.32
0.95
Doc ID 7474 Rev 10


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Z01
Packaging information
Table 7. TO-92 dimensions
Dimensions
REF.
Millimeters
Inches
BC
A
F
D
E
Min. Typ. Max. Min. Typ. Max.
aA
B
1.35
4.70
0.053
0.185
C 2.54
0.100
D 4.40
0.173
E 12.70
0.500
F 3.70 0.146
a 0.50 0.019
Table 8. SMBflat-3L dimensions
Dimensions
Ref. Millimeters
Inches
A
D
L 2x
E E1
L
c
e
b 2x
L2 2x
L1
L1
L2
b4
Min. Typ. Max. Min. Typ. Max.
A 0.90
1.10 0.035
0.043
b 0.35
0.65 0.014
0.026
b4 1.95
2.20 0.07
0.087
c 0.15
0.40 0.006
0.016
D 3.30
3.95 0.130
0.156
E 5.10
5.60 0.201
0.220
E1 4.05
4.60 0.156
0.181
L 0.75
1.50 0.030
0.059
L1 0.40
0.016
L2 0.60
0.024
e 1.60
0.063
Figure 16. SMBflat-3L footprint dimensions
0.51
(0.020)
5.84
(0.230)
2.07
(0.082)
2.07
(0.082)
0.51
(0.020)
1.20 3.44
(0.047) (0.136)
millimeters
(inches)
1.20
(0.047)
Doc ID 7474 Rev 10
9/12


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Packaging information
Z01
Figure 17. Footprint and connectors for SOT-223 or SMBflat-3L (dimensions in mm)
5.84
3.42
3.25
2.92
1.30
1.20
1.08
SMBF3L
SMBF3L
SOT-223
1.35
1.20
1.08
SMBF3L
Solder resist
Solder lands
Solder paste
SOT-223
SOT-223
0.85
0.95
1.10
2.30
SOT-223
Connector line
10/12
Doc ID 7474 Rev 10


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Z01
4 Ordering information
Ordering information
Table 9. Ordering information
Order code(1) Marking(1)
Package
Z01xxyA 1AA2 Z01xxyA
TO-92
Z01xxyA 2AL2
Z01xxyA 5AL2
Z0103yN 5AA4
Z0107yN 5AA4
Z01xxyA
Z01xxyA
Z3y
Z7y
TO-92
TO-92
SOT-223
SOT-223
Z0109yN 5AA4
Z0103MUF
Z0107MUF
Z0109MUF
Z9y
Z3M
Z7M
Z9M
SOT-223
SMBflat-3L
SMBflat-3L
SMBflat-3L
1. xx = sensitivity, y = voltage
Weight
0.2 g
0.2 g
0.2 g
0.12 g
0.12 g
0.12 g
46.78 mg
46.78 mg
46.78 mg
Base quantity Delivery mode
2500
2000
2000
1000
1000
1000
5000
5000
5000
Bulk
Ammopack
Tape and reel
Tape and reel
Tape and reel
Tape and reel
Tape and reel
Tape and reel
Tape and reel
5 Revision history
Table 10. Document revision history
Date
Revision
Changes
Oct-2001
10-Feb-2005
09-May-2005
21-Apr-2006
10-Oct-2006
4 Last update.
5 Package: TO-92 tape and reel delivery mode 5AL2 added.
Table 4 on page 2: typo. mistake corrected
6 1. (dV/dt)c instead of (dI/dt)c
2. V/µs unit instead of A/ms
7
Reformatted to current standard. Table 2 on page 2: Typo
corrected. Values for IGT split into two separate rows.
8
Table 2: modified test conditions for (dV/dt)c. Changed “ambient”
to “lead or tab” in Figure 2.
20-Oct-2010
14-Dec-2010
9 Package: SOT-223 13” tape and reel added = 6AA4
Added package SMBflat-3L. Updated dimensions in Table 6.
10 Updated Figure 3 and Figure 12. Updated Table 5: Product
Selector.
Doc ID 7474 Rev 10
11/12


Z0103MN (STMicroelectronics)
Standard 1A Triacs

No Preview Available !

Click to Download PDF File for PC

Z01
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2010 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
12/12
Doc ID 7474 Rev 10




Z0103MN.pdf
Click to Download PDF File