YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
PRODUCT
MODEL NO
SUPPLIER
DATE
: LCD MODULE
: YTS500ZLAA-01-100C
: Yes Optoelectronics Co.,Ltd
: FEB.04.2017
SPECIFICATION
Approved
Checked
Department
XIAO YU
LIANGYUEYAO
TP & TFT LCM Department
CUSTOMER:
MODEL NO.:
Approved
Checked
DATE:
Department
ADD: No.288Yueling Road Anshan, Liaoning, CHINA
TEL: 86-412-5211859 FAX: 86-412-5211729 P.C.:114045
E-mail : yes@yes-lcd.com, yeslcd@globalsources.com
Web: http://www.yes-lcd.com
http://www.asiansources.com/sante.com
1 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
CONTENTS
1.General Specifications .............................................................................................................. 4
2.Mechanical Drawing ................................................................................................................. 5
3.PIN Assignment ........................................................................................................................ 6
4.Absolute Maximum Rating....................................................................................................... 7
5.Electrical Characteristics........................................................................................................... 7
5.1.Recommended Operating Condition ................................................................................. 7
5.2.Rcommended Driving Condition for Backlight................................................................. 7
6. Timing Characteristics ............................................................................................................. 8
6.1.AC Electrical Characteristics ............................................................................................. 8
6.2. DC Electrical Characteristics ............................................................................................ 9
6.3. Timing ............................................................................................................................. 10
6.4.Power ON/OFF Sequence................................................................................................ 13
7.Optical Characteristics ............................................................................................................ 15
8.Environmental/Reliability Test ............................................................................................... 18
9.Packing Drawing..................................................................................................................... 19
10. Standard Specifications For Product Quality....................................................................... 20
11.Precautions for Use of LCD Modules................................................................................... 24
12.Prior Consult Matter.............................................................................................................. 28
13.Factory................................................................................................................................... 28
2 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C
Revision Record
Version : 1.0 FEB.04.2017
Rev No. Rev Date Contents
1.0 2017.02.04 New creation
Remarks
3 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
1. General Specifications
No Item
1 Size
2 Resolution
3 Interface
4 Color Depth
5 Technology Type
6 Pixel Pitch
7 Pixel Arrangement
8 Display Mode
9 Viewing Direction
10 LCM (W x H x D)
11 Active Area (W x H)
12 With/Without TSP
13 LED Numbers
Contents
5
1080XRGB1920
MIPI
16.7M
a-Si TFT
0.01905X0.05710
RGB Vertical Stripe
Transmissive, Normally black
ALL
72.03*143.98*3.25
61.641*109.584
With CTP
12
Unit
inch
M
mm
oclock
mm
mm
Touch panel parameter
No Features
1 CTP Technology
2 Input Method
3 Touch point
4 Positional Accuracy
5 Connection Type
6 Anti-glare surface
7 Optical transmittance
8 Interface toHost
9 I2C Address
10 Touch controller
Details
Mutual capacitor
Finger
5Point
Note
2.5mm at 4 edges and 1.5mm at center Unit: mm
ZIF Connector
No
87%
I2C
0X28
GT970
4 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE
2. Mechanical Drawing
YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
5 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
3. PIN Assignment
Pin No
1
2
3
Symbol
GND
LEDK
LEDA
4 LCD_PWM
5 GND
6 LPTE
7 RST
8 GND
9 VCCIO
10 VCC
11 GND
12 SD7_1_IN
13 SD6_1_IN
14 SD7_1_OUT_2_IN
15 SD6_1_OUT_2_IN
16 GND
17 MIPI_D0P
18 MIPI_D0N
19 GND
I/O Function
P Common Voltage
P LED backlight cathode
P LED backlight anode
PWM output pin of Backlight control. If use
CABC function, the pin can connect to external
I LED driver IC.
If not used, let it open.
P Ground
O Tearing Effect pin.
Reset pin. Setting either pin low initializes the
I LSI. Must be reset after power is supplied
(Must be connected to VSSD or VDD1)
P Ground
P Power voltage
P Power voltage
P Ground
I Connect to the host input pin
I Connect to the host input pin
O Connect to the host output pin
O Connect to the host output pin
P Ground
MIPI DSI : Data differential signal input pins.
I (Data lane 0)if not used , Please connected to
VSSD or open.
MIPI DSI : Data differential signal input pins.
I (Data lane 0)if not used , Please connected to
VSSD or open.
P Ground
Remark
6 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
Pin No
20
21
22
23
24
25
26
27
28
29
30
31
Symbol
MIPI_D1P
MIPI_D1N
GND
MIPI_CLKP
MIPI_CLKN
GND
MIPI_D2P
MIPI_D2N
GND
I/O Function
MIPI DSI : Data differential signal input pins.
I (Data lane 1)if not used , Please connected to
VSSD or open.
MIPI DSI : Data differential signal input pins.
I (Data lane 1)if not used , Please connected to
VSSD or open.
P Ground
MIPI DSI : CLOCK differential signal input pins.
I if not used , Please connected to VSSD or open.
I
MIPI DSI : CLOCK differential signal input pins.
if not used , Please connected to VSSD or open.
P Ground
MIPI DSI : Data differential signal input pins.
I (Data lane 2)if not used , Please connected to
VSSD or open.
MIPI DSI : Data differential signal input pins.
I (Data lane 2)if not used , Please connected to
VSSD or open.
P Ground
Remark
MIPI_D3P
MIPI DSI : Data differential signal input pins.
I (Data lane 3)if not used , Please connected to
VSSD or open.
MIPI_D3N
GND
MIPI DSI : Data differential signal input pins.
I (Data lane 3)if not used , Please connected to
VSSD or open.
P Ground
Ps: For further details, please refer to HX8399-C data sheet.
7 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
4. Absolute Maximum Rating
AGND = GND = 0V , Ta = 25°C
Item
Power Voltage
Operating Temperature
Storage Temperature
Symbol
VCCIO
VCC
TOPR
TSTG
Min
-0.3
-0.3
-10
-20
Max
4.4
6.0
60
70
Unit
V
V
°C
°C
Remark
The absolute maximum rating values of this product are not allowed to be exceeded at any
times.Should a module be used with any of the absolute maximum ratings exceeded,the
characteristics of the module may not be recovered,or in an extreme case,the module may
be permanently destroyed.
5. Electrical Characteristics
5.1. Recommended Operating Condition
AGND = GND = 0V , Ta = 25°C
Item
Power Voltage
Input logic high voltage
Input logic low voltage
Symbol
VCC
VCCIO
VIH
VIL
Min
1.65
2.3
0.8 VCCIO
0
Typ.
3.3
2.8
-
-
Max
3.6
5.5
VCCIO
0.2 VCCIO
Unit
V
V
V
V
Remark
5. 2.Rcommended Driving Condition for Backlight
Ta = 25°C
Item
Forward Current
Forward Voltage
Operating Life Time
Symbol
Min Typ
40
19.2
20000
Max
Unit
mA
V
Remark
Note 1
Note 2
Note 1:The LED supply voltage is defined by the number of LED at Ta=25and
IF= 40 mA.
Note 2:The Operating Life Timeis defined as the module brightness decrease to 50%
original brightness at Ta=25 and IF= 40 mA.The LED lifetime could be
decreased if operating IF is lager than 40 mA.
8 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE
LED circuit diagram
YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
6. Timing Characteristics
6.1. AC Electrical Characteristics
9 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C
6. 2.DC Electrical Characteristics
Version : 1.0 FEB.04.2017
6. 3.Timing
10 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
11 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE
6. 4.Power ON/OFF Sequence
YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
12 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE
7. Optical Characteristics
YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
Item
View Angles
Symbol
θT
θB
θL
θR
Contrast Ratio
Chromaticity
Wx
Wy
Uniformity
CR
x
y
U
Luminance
L
Condition
CR10
θ = 0°
Min
70
70
70
70
0.269
0.303
80
230
Typ.
80
80
80
80
900
0.299
0.333
Max Unit
Degree
0.329
0.363
%
cd/m2
Test Conditions:
1If=40mA(Backlight current), VCC =3.3V,the ambient temperature is 25°C.
2. The test systems refer to Note 2.
Remark
Note 2
Note 1
Note 3
Note 1
Note 5
Note 5
Note 1
Note 5
13 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
Note1: Definition of optical measurement system.
The optical characteristics should be measured in dark room. After 5Minutes operation, the
optical properties are measured at the center point of the LCD screen. ALL input terminals
LCD panel must be ground when measuring the center area of the panel.
Item Photo detector
Contrast Ratio
Luminance
CS1000
Lum Uniformity
Chromaticity
CS1000
Response Time DMS703
Field
1º
-
Note2: Definition of viewing angle range and measurement system.
Viewing angle is measured at the center point of the LCD by CONOSCOPE (DMS703)
NOTE3: Definition of contrast ratio
14 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
“White state :The state is that the LCD should drive by Vwhite.
Black state :The state is that the LCD should drive by Vblack.
Vwhite: To be determined
Vblack: To be determined
Note4:Definition of Response time
The response time is defined as the LCD optical switching time interval between Whitestate
and Blackstate. Rise time (TON)is the time between photo detector output intensity changed
from 90% to 10%.And fall time (TOFF)is the time between photo detector output intensity
changed from 10% to90%.
Note5:Definition of color chromaticityCIE1931
Color coordinates measured at center point of LCD.
Note6: Definition of Luminance Uniformity
Active area is divided into 9 measuring areas(Refer Fig.2).Every measuring point is placed at
the center of each measuring area.
Luminance Uniformity (U)=Lmin/Lmax
L--------Active area length W--------Active area width
L max: The measured Maximum luminance of all measurement position.
L min: The measured Minimum luminance of all measurement position.
Note7: Definition of luminance:
15 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C
Measure the luminance of white state at center point.
Version : 1.0 FEB.04.2017
16 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
8. Environmental/Reliability Test
No. Test Item
1 High Temperature Storage
2 Low Temperature Storage
3
High Temperature
Operating
4
Low Temperature
Operating
5 Temperature Cycle
6 Damp Proof Test
7 Vibration Test
8
Dropping test
Test Condition
Inspection after test
70±2/240 hours
-20±2/240 hours
Inspection after
60±2/240 hours
2~4hours storage at
room temperature, the
-10±2/240 hours
sample shall be free
from defects:
-20~ 20~ 70× 1.Air bubble in the
10cycles
(30min.) (5min.) (30min.)
LCD;
2.Sealleak;
3.Non-display;
60±5×90%RH/240 hours 4.missing segments;
Frequency10Hz~55Hz~10Hz 5.Glass crack;
Amplitude1.5mm,
6.Current Idd is twice
XYZ direction for total
Drop to the3ghroouurnsd from 1m
higher than
initial value.
height,(Ponaecktinmge,conedvietiroyns)ide of
carton.
(Packing condition)
Remark:
1.The test samples should be applied to only one test item.
2.Sample size for each test item is 5~10pcs.
3.For Damp Proof Test, Pure water(Resistance10M) should be used.
4.In case of malfunction defect caused by ESD damage, if it would be recovered to
normal state after resetting, it would be judge as a good part.
5.Failure Judgment Criterion: Basic Specification, Electrical Characteristic,
Mechanical Characteristic, Optical Characteristic.
6.Please use automatic switch menu(or roll menu) testing mode when test operating
mode.
17 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE
9. Packing Drawing
YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
18 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
10. Standard Specifications For Product Quality
10.1. Manner of test:
10.1.1 The test must be under 40W fluorescent light, and the distance of view must be at
30±10cm.
10.1.2 Room temperature 25±5Humidity: (60±10)RH.
10.2. Quality specification
It shall be based on GB2828-87, inspection level II .
MAJOR
(MA)
MINOR
(MI)
IETM
1.Liquid crystal leakage
2.Wrong polarizer
3.Outside dimension
4. Bright dotDark dot
5. Display abnormal
6. Class crack
1. Spot Defect (Including black spotwhite spot
pinholeforeign particlebubbleshurt
2. fragment
3. Line Defect (Including black linewhite line
scratch)
4. Incision defect
5. Newton’s ring
6. Other visual defects
CHECK LEVEL AQL
0.25
1.0
10.3. Definition of area:
10.3.1 area: viewing area
area: outside viewing area
10.4.Standard of appearance test for area: (unit: mm)
NOTEDefect ignore for area .
19 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
10.4.1 Bright/Dark Dots explain
Name
Explain
Dots appear bright and unchanged in size in which LCD panel
isdisplaying under black pattern
Definition
Bright dot
Dots appear dark and unchanged in size in which LCD panel
isdisplaying under pure red, green, blue pattern.
Dark dot
The definition of dot:
The size of a defective
dot over 1/2 of single
pixel dot is regarded
as one defective dot .
NOTE: One pixel
consists of 3 sub-pixels,
including R,G, and B
dot.(Sub-pixel = Dot)
ADJACE Adjacent two sub-pixel are defectdefine two dot defect
NT DOT
10.4.2 Inspection standard
Items
Under 6
(contain 6)
1 Bright/dark dot
6-12
Criterion
Bright dot2
Dark dotN≤4
Note: be more than 5mm apart
Bright dotN≤4
Dark dotN≤5
Total Bright and Dark DotsN≤8
Note
1.Two bright dot defects (red, green,
blue, and white) should be larger
than 15mm
2.The distance between black dot
defects or black and bright dot
defects should be more than 5mm
apart.
Checking
Manner
Checking
with eyes
Defect
Classes
MAJ
Spot Defect
(Including black
spot.white spot.
Pinhole.foreign
Under 6
contain 6
D≤0.1 Ignore
0.1D≤0.35 N≤3
0.35D N=0
particle.bubbles.h
2 urt
D≤0.3 Ignore
6-12
0.3D≤0.6 N≤4
0.6D N=0
Checking
with eyes
MIN
D=(X+Y)/2
20 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
Items
Criterion
Line Defect
W≤0.02 Ignore
(Including black
Under 60.02W≤0.04 L≤5 N≤2
Line.white line. contain 60.04W≤0.06 L≤5 N≤1
scratch)
3
W0.06 N=0
W≤0.07 Ignore
6-12
0.07W≤0.1 L≤10 N≤4
W0.1 N=0
Checking Defect
manner classes
Checking
with eyes
MIN
4 Display abnormal Not allowed
5
Outside
dimension
Accord with drawing
6 Class crack
Not allowed
Checking
with eyes
Callipers
Checking
with eyes
7 Leak
Not allowed
Comer fragment X≤3 Y≤3 Z≤T Ignore
Note
8 1.No hurt identifying .wire.seal
2.TGlass thickness X: Length Y: Width Z:
thickness
Checking
with eyes
Checking
with eyes
Side fragment
Y≤1 Z≤T Ignore
Note
1.No hurt identifying .wire.seal
2.TGlass thickness X: Length
thickness
Y: Width
Z:
Checking
with eyes
Step fragment
MAJ
MAJ
MAJ
MAJ
MIN
MIN
Y≤1 and Y≤1/4 L
9
Checking
with eyes
MIN
Incision defect
Y≤1 and accord with outside dimension
Checking
with eyes
MIN
21 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
Items
Newton’s ring
CTP or Cover
board
10
D=(X+Y)/2
Criterion
Under 6
(contain 6)
D≤25 N≤3
D25 N=0
6-12
D≤70 N≤5
D70 N=0
Checking Defect
manner classes
Checking
with eyes
MIN
22 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
11. Precautions for Use of LCD Modules
11.1 Handing Precautions
(1) The display panel is made of glass and polarizer. As glass is fragile. It tends to
become or chipped during handling especially on the edges. Please avoid dropping or
jarring. Do not subject it to a mechanical shock by dropping it or impact.
(2) If the display panel is damaged and the liquid crystal substance leaks out, be sure not
to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap
and water.
(3) Do not apply excessive force to the display surface or the adjoining areas since this
may cause the color tone to vary. Do not touch the display with bare hands. This will stain
the display area and degraded insulation between terminals (some cosmetics are
determined to the polarizer).
(4) The polarizer covering the display surface of the LCD module is soft and easily
scratched. Handle this polarizer carefully. Do not touch, push or rub the exposed polarizers
with anything harder than an HB pencil lead (glass,tweezers, etc.). Do not put or attach
anything on the display area to avoid leaving marks on. Condensation on the surface and
contact with terminals due to cold will damage, stain or dirty the polarizer. After products
are tested at low temperature they must be warmed up in a container before coming is
contacting with room temperature air.
(5) If the display surface becomes contaminated, breathe on the surface and gently wipe
it with a soft dry cloth. If it is heavily contaminated, moisten cloth with one of the following
solvents
- Isopropyl alcohol
- Ethyl alcohol
Do not scrub hard to avoid damaging the display surface.
(6) Solvents other than those above-mentioned may damage the polarizer. Especially, do
not use the following.
- Water
- Ketone
- Aromatic solvents
Wipe off saliva or water drops immediately, contact with water over a long period of time
may cause deformation or color fading. Avoid contacting oil and fats.
(7) Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is
accelerated by water droplets, moisture condensation or a current flow in a high-humidity
environment.
(8) Install the LCD Module by using the mounting holes. When mounting the LCD
module make sure it is free of twisting, warping and distortion. In particular, do not forcibly
pull or bend the
cable
or the backlight cable.
(9) Do not attempt to disassemble or process the LCD module.
(10) NC terminal should be open. Do not connect anything.
(11) If the logic circuit power is off, do not apply the input signals.
(12) Electro-Static Discharge Control,Since this module uses a CMOS LSI, the same
careful attention should be paid to electrostatic discharge as for an ordinary CMOS IC. To
prevent destruction of the elements by static electricity, be careful to maintain an optimum
work environment.
23 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
- Before remove LCM from its packing case or incorporating it into a set, be sure the
module and your body have the same electric potential.Be sure to ground the body when
handling the LCD modules.
- Tools required for assembling, such as soldering irons, must be properly grounded.
make certain the AC power source for the soldering iron does not leak. When using an
electric screwdriver to attach LCM, the screwdriver should be of ground potentiality to
minimize as much as possible any transmission of electromagnetic waves produced sparks
coming from the commutator of the motor.
- To reduce the amount of static electricity generated, do not conduct assembling and
other work under dry conditions. To reduce the generation of static electricity be careful that
the air in the work is not too dried. A relative humidity of 50%-60% is recommended.As far
as possible make the electric potential of your work clothes and that of the work bench the
ground potential.
The LCD module is coated with a film to protect the display surface. Exercise care when
peeling off this protective film since static electricity may be generated.
(13)Since LCM has been assembled and adjusted with a high degree of precision, avoid
applying excessive shocks to the module or making any alterations or modifications to it.
- Do not alter, modify or change the shape of the tab on the metal frame.
- Do not make extra holes on the printed circuit board, modify its shape or change the
positions of components to be attached.
- Do not damage or modify the pattern writing on the printed circuit board.
- Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal
connector.
- Except for soldering the interface, do not make any alterations or modifications with
a soldering iron.
- Do not drop, bend or twist LCM.
11.2 Storage Precautions
When storing the LCD modules, the following precaution is necessary.
(1) Store them in a sealed polyethylene bag. If properly sealed, there is no need for the
dessicant.
(2) Store them in a dark place. Do not expose to sunlight or fluorescent light, keep the
temperature between 0C and 35C.
(3) The polarizer surface should not come in contact with any other objects. (We advise
you to store them in the container in which they were shipped).
11.3 Others
Liquid crystals solidify under low temperature (below the storage temperature range)
leading to defective orientation or the generation of air bubbles (black or white). Air bubbles
may also be generated if the module is subject to a low temperature.
If the LCD modules have been operating for a long time showing the same display
patterns, the display patterns may remain on the screen as ghost images and a slight
contrast irregularity may also appear.A normal operating status can be regained by
suspending use for some time. It should be noted that this phenomenon does not
adversely affect performance reliability.
To minimize the performance degradation of the LCD modules resulting from
destruction caused by static electricity etc., exercise care to avoid holding the following
24 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C
sections when handling the modules.
- Exposed area of the printed circuit board.
-Terminal electrode sections.
Version : 1.0 FEB.04.2017
11.4 USING LCD MODULES
Installing LCD Modules
The hole in the printed circuit board is used to fix LCM as shown in the picture below.
Attend to the following items when installing the LCM.
(1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell.
(2) When assembling the LCM into other equipment, the spacer to the bit between the
LCM and the fitting plate should have enough height to avoid causing stress to the module
surface, refer to the individual specifications for measurements. The measurement tolerance
should be 0.1mm.
Precaution for assemble the module with BTB connector:
Please note the position of the male and female connector position,dont assemble or
assemble like the method which the following picture shows
Precaution for soldering to the LCM
Hand soldering Machine drag
No ROHS 290C~350C. 3so3l0deCrin~g350C.
Product Time : 3-5S. Speed : 4-8mm/s.
ROHS 340C~370C. 350C ~370C.
Product Time : 3-5S. Time : 4-8 mm/s.
Machine press soldering
300C~330C.
Time : 3-6S.
Press: 0.8~1.2Mpa
330C~360C.
Time : 3-6S.
Press: 0.8~1.2Mpa
(1)If soldering flux is used, be sure to remove any remaining flux after finishing to
25 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
soldering operation. (This does not apply in the case of a non-halogen type of flux.) It is
recommended that you protect the LCD surface with a cover during soldering to prevent
any damage due to flux spatters.
(2) When soldering the electroluminescent panel and PC board, the panel and board
should not be detached more than three times. This maximum number is determined by
the temperature and time conditions mentioned above, though there may be some variance
depending on the temperature of the soldering iron.
(3) When remove the electroluminescent panel from the PC board, be sure the solder has
completely melted, the soldered pad on the PC board could be damaged.
Precautions for Operation
(1) It is an indispensable condition to drive LCD's within the specified voltage limit
since the higher voltage then the limit cause the shorter LCD life.An electrochemical
reaction due to direct current causes LCD's undesirable deterioration, so that the use of
direct current drive should be avoided.
(2) Response time will be extremely delayed at lower temperature than the operating
temperature range and on the other hand at higher temperature LCD's show dark color in
them.However those phenomena do not mean malfunction or out of order with LCD's,
Which will come back in the specified operating temperature.
(3) If the display area is pushed hard during operation, the display will become abnormal.
However, it will return to normal if it is turned off and then back on.
(4) A slight dew depositing on terminals is a cause for electro-chemical reaction resulting
in terminal open circuit. Usage under the maximum operating temperature,50%RH or less is
required.
(5) Input each signal after the positive/negative voltage becomes stable.
(6) Please keep the temperature within specified range for use and storage. Polarization
degradation, bubble generation or polarizer peel-off may occur with high temperature and high
humidity.
Safety
(1) It is recommended to crush damaged or unnecessary LCDs into pieces and wash
them off with solvents such as acetone and ethanol, which should later be burned.
(2) If any liquid leaks out of a damaged glass cell and comes in contact with the
hands, wash off thoroughly with soap and water.
(3) WEEE order must be executed in product scrap.
12. Prior Consult Matter
1.For YES standard products, we keep the right to change material, process ... for
improving the product property without notice on our customer.
For OEM products, if any change needed which may affect the product property, we
will consult with our customer in advance.
2.If you have special requirement about reliability condition, please let us know before you
start the test on our samples.
26 of 27


YTS500ZLAA-01-100C (Yes Optoelectronics)
TFT Display module

No Preview Available !

Click to Download PDF File for PC

LCD MODULE YTS500ZLAA-01-100C Version : 1.0 FEB.04.2017
13. Factory
FACTORY NAME: YES OPTOELECTRONICS CO.,LTD
FACTORY ADDRESS: No.288Yueling Road Anshan, Liaoning, P.R.CHINA
FACTORY PHONE: 86-412-5211859 FAX: 86-412-5211729
27 of 27




YTS500ZLAA-01-100C.pdf
Click to Download PDF File