G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
Preliminary Specification
Final Specification
Module
Model Name
24.0” Color TFT-LCD
G240HW01 V1
G240HW01 V1
Customer
Date
Approved by
Date
Crystal Hsieh
2017/04/07
Checked &
Approved by
Prepared by
Jimmy Tsai
2017/04/07
Note: This Specification is subject to change
without notice.
General Display Business Division / AU
Optronics corporation
document version 1.0
1
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
Contents
1. Operating Precautions ......................................................................................4
2. General Description ..........................................................................................5
2.1 Display Characteristics ...................................................................................................... 5
2.2 Optical Characteristics....................................................................................................... 6
3. Functional Block Diagram ................................................................................9
4. Absolute Maximum Ratings............................................................................10
4.1 TFT LCD Module ............................................................................................................. 10
4.2 Backlight Unit................................................................................................................... 10
4.3 Absolute Ratings of Environment .................................................................................... 10
5. Electrical Characteristics................................................................................11
5.1 TFT LCD Module ..............................................................................................................11
5.2 Backlight Unit................................................................................................................... 13
6. Signal Characteristic.......................................................................................14
6.1 Pixel Format Image ......................................................................................................... 14
6.2 Signal Description............................................................................................................ 15
6.3 The Input Data Format .................................................................................................... 16
6.4 Interface Timing ............................................................................................................... 17
6.5 Power ON/OFF Sequence............................................................................................... 18
7. Connector & Pin Assignment .........................................................................19
7.1 TFT LCD Module: LVDS Connector ................................................................................ 19
7.2 Backlight Unit: LED Connector ........................................................................................ 20
8. Reliability Test .................................................................................................21
9. Mechanical Characteristics ............................................................................22
10. Label and Packaging.....................................................................................23
10.1 Shipping Label (on the rear side of TFT-LCD display)................................................... 23
10.2 Carton Package............................................................................................................. 23
11. Safety .............................................................................................................24
11.1 Sharp Edge Requirements............................................................................................. 24
11.2 Materials ........................................................................................................................ 24
11.3 Capacitors...................................................................................................................... 24
11.4 National Test Lab Requirement...................................................................................... 24
document version 1.0
2
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
Record of Revision
Version and Date Page
Old description
0.1 2015/03/23
0.2 2015/12/28
All First Edition for Customer
5,6 Brigntness: 250 nits (Typ.)
13
0.3 2016/02/02 5
10
New Description
All
Brigntness: 300 nits (Typ.)
Remark
13
20
21 old reliability test conditions
23
1.0 2017/04/07 5
upgrade reliability test conditions
6
10
13
21 Ta= 70, 50%RH, 300hours
Ta= 70, 300hours
document version 1.0
3
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
1. Operating Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open or modify the Module Assembly.
8) In case if a Module has to be put back into the packing container slot after once it was taken out from the
container, take it easily, or the TFT Module may be damaged.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
10) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even
momentary. At designing the enclosure, it should be taken into consideration that no bending/twisting forces
are applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
11) Small amount of materials having no flammability grade is used in the LCD module. The LCD module should
be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be
applied exemption.
12) Severe temperature condition may result in different luminance, response time and LED life time.
13) The data on this specification sheet is applicable when LCD module is placed in landscape position.
14) Continuous displaying fixed pattern may induce image sticking. It is recommended to use screen saver or
shuffle content periodically if fixed pattern is displayed on the screen.
document version 1.0
4
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
2. General Description
This specification applies to the 24 inch-wide Color TFT-LCD Module G240HW01 V1. The display supports the
Full HD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 8-bits data). All input signals are dual channel
LVDS interface.
LED driver board is included. G240HW01 V1 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
ITEMS
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Arrangement
Display Mode
White Luminance ( Center )
Contrast Ratio
Optical Response Time
Nominal Input Voltage VDD
Power Consumption
Weight
Physical Size
Electrical Interface
Support Color
Surface Treatment
Temperature Range
Operating
Storage (Shipping)
RoHS Compliance
Unit
[mm]
[mm]
[um]
[cd/m2]
[msec]
[Volt]
[Watt]
[g]
[mm]
[oC]
[oC]
SPECIFICATIONS
609.7(24.0”)
531.36 (H) x 298.89 (V)
1920(x3) x 1080
276.75 (per one triad) ×276.75
R.G.B. Vertical Stripe
VA Mode, Normally Black
300
5000: 1
25
+5.0 V
23.3 (max) (Cell: 6 + BL: 17.3)
2,130 (Typ.)+/-213 g
556.0 (W) x 323.2 (H) x 17.0 (D)
Dual channel LVDS
16.7M colors (true 8-bit)
Anti-Glare, 3H
-20 to +70
-30 to +80
RoHS Compliance
document version 1.0
5
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25(Room Temperature):
Item
Unit
Conditions
Min.
Typ. Max.
White Luminance
[cd/m2]
IF= 45 mA
240 300
-
Note
1
Uniformity
% 9 Points
75 80 - 1, 2, 3
Contrast Ratio
Cross talk
Response Time
Viewing Angle
Color / Chromaticity
Coordinates
(CIE 1931)
Color Gamut
%
[msec]
[degree]
[degree]
[degree]
[degree]
%
Rising
Falling
Rising + Falling
Horizontal (Right)
CR = 10 (Left)
Vertical
CR = 10
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
(Upper)
(Lower)
3000
-
-
-
-
75
75
75
75
0.593
0.289
0.279
0.574
0.105
0.000
0.263
0.279
5000
-
16
9
25
89
89
89
89
0.643
0.339
0.329
0.624
0.155
0.048
0.313
0.329
72
-
1.5
-
-
50
-
-
-
-
0.693
0.389
0.379
0.674
0.205
0.098
0.363
0.379
-
4
5
6
7
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
1฀with 50cm viewing distance
Test Point Center
Environment < 1 lux
document version 1.0
LCD Module
SR_3 or
equivalent
Measuring distance
Module Driving Equipment
6
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
Note 2: Definition of 9 points position. Display active area:
90 %
50 %
10 %
10 %
50 %
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum
test point luminance
Minimum Brightness of nine points
δW9 =
Maximum Brightness of nine points
Note 4Definition of contrast ratio (CR):
Contrast ratio (CR)= Brightness on the “White” state
Brightness on the “Black” state
Note 5Definition of cross talk (CT)
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 255 pattern (cd/m2)
YB = Luminance of measured location with gray level 255 pattern (cd/m2)
1/2 1/6
2/3 1/2 1/3 1/6
A
127 gray level
1/6
1/2
B
A’
127 gray level
1/6
1/3
1/2
B’
2/3
document version 1.0
255 gray level
7
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black”
(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and
90% of amplitudes. Please refer to the figure as below.
% Tf
Tr
Optical
response
100
90
10
0
White
Black
White
Note 7: Definition of viewing angle
Viewing angle is the measurement of contrast ratio ฀10, at the screen center, over a 180° horizontal and 180°
vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal
left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to
the display surface with the screen rotated to its center to develop the desired measurement viewing angle.
document version 1.0
8
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
3. Functional Block Diagram
The following diagram shows the functional block of the 24 inches wide Color TFT-LCD Module:
I/F + X-PCB
DC POWER
LED driver board
DC/DC
Converter
Gamma
Correction
+5V
LVDS
AUO ASIC
LVDS
Receiver
Timing
Controller
D1
G1
D5760 Light bar
X-Driver IC
TFT-LCD
1920*(3)*1080
Pixels
G1080
LVDS Connector: JAE (FI-XB30SRL-HF11) or equivalent.
LED Connector: Sin Sheng (MS24049HJ) or equivalent.
document version 1.0
9
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
4. Absolute Maximum Ratings
4.1 TFT LCD Module
Item
Symbol
Min
Max
Unit Conditions
Logic/LCD Drive Voltage VDD
0
5.5
[Volt]
Note 1,2
4.2 Backlight Unit
Item
LED Input Voltage
Symbol
Vcc
Min
10.8
Max
13.2
Unit
[Volt]
Conditions
Note 1,2
4.3 Absolute Ratings of Environment
Item
Operating Temperature
Operation Humidity
Storage Temperature
Storage Humidity
Symbol
TOP
HOP
TST
HST
Min.
-20
5
-30
5
Max.
70
90
80
90
Unit
[oC]
[%RH]
[oC]
[%RH]
Note 1: With in Ta (25)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: For quality perfermance, please refer to AUO IIS(Incoming Inspection Standard).
Conditions
Note 3
document version 1.0
10
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol
VDD
Parameter
Logic/LCD Drive
Voltage
IDD VDD Current
Irush LCD Inrush Current
PDD VDD Power
Min Typ Max Units
Remark
4.5 5.0 5.5 [Volt] ±10%
VDD= 5.0V, All White Pattern
- 900 1200 [mA]
At 60Hz
- - 3 [A] Note 1
VDD= 5.0V, All White Pattern
- 4.5 6 [Watt] At 60Hz
Note 1: Measurement condition:
+5.0V
(High to Low)
Control
Signal
R1
47K
R2
SW1
+12.0V
SW MAG-SPST
1K
VR1
47K
Q3
AO6402
D6
D5
D2
D1
S
Q3
AO6402
G
C3
0.01uF/25V
C2
1uF/25V
F1
VCC
C1
1uF/16V
(LCD Module Input)
90%
5.0V
VDD rising time 0V
10%
0.5ms
document version 1.0
11
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Symbol
Item
Min. Typ. Max. Unit
VTH Differential Input High Threshold
- - 100 [mV]
Remark
VCM=1.2V
VTL Differential Input Low Threshold
-100 -
- [mV]
VCM=1.2V
VIDInput Differential Voltage
100 400 600 [mV]
Differential Input Common Mode
VICM Voltage
0.3 - 1.25 [V] VTH/VTL=±100mV
Note: LVDS Signal Waveform.
V
T
H
VICM
VID
VSS
document version 1.0
12
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
5.2 Backlight Unit
5.2.1 LED Driver
Following characteristics are measured under stable condition at 25฀ (Room Temperature).
Symbol
Vcc
Ivcc
PLED
Irush
BL_EN
FPWM
IF
LTLED
Parameter
Input Voltage
Input Current
Power Consumption
Inrush Current
On Control Voltage
Off Control Voltage
PWM Dimming Frequency
High Voltage
Low Voltage
Dimming Duty Cycle
LED Forward Current
LED Life Time
Min
10.8
-
-
3
0
200
3.0
0
10
50,000
Typ
12
1.2
14.4
4
-
-
-
3.3
-
-
45
-
Max
13.2
-
17.3
5
5.5
0.5
20K
5.5
0.5
100
-
Units
Volt
A
Watt
A
Volt
Volt
Hz
Volt
Volt
%
mA
Hrs
Remark
100% Dimming
100% Dimming
Ta = 25oC
Note 4
Note 1: Ta means ambient temperature of TFT-LCD module,
Note 2: If module is driven by high current or at high ambient temperature & humidity condition. The operating life will
be reduced.
Note 3: LED light bar structure: ( 7 strings x 10pcs / string =70pcs LED)
Note 4: Definition of life time: Brightness becomes to 50% of its original value. The minimum life time of LED unit is on
the condition of IF = 45 mA and 25±2°C (Room Temperature).
document version 1.0
13
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
12
1919 1920
1st Line R G B R G B
R GB R GB
G240HW01 V1
1080 Line R G B R G B
R GB R GB
document version 1.0
14
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
6.2 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential
signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative
edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx)
transmits even pixels.
PIN # SIGNAL NAME
1 RXinO0-
2 RXinO0+
3 RXinO1-
4 RXinO1+
5 RXinO2-
6 RXinO2+
7 GND
8 RxOCLKIN-
9 RxOCLKIN+
10 RXinO3-
11 RXinO3+
12 RXinE0-
13 RXinE0+
14 GND
15 RXinE1-
16 RXinE1+
17 GND
18 RXinE2-
19 RXinE2+
20 RxECLKIN-
21 RxECLKIN+
22 RXinE3-
23 RXinE3+
24 GND
25 NC
26 NC
27 VDD
28 VDD
29 VDD
30 VDD
DESCRIPTION
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
Positive LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
Power Ground
Negative LVDS differential clock input (Odd clock)
Positive LVDS differential clock input (Odd clock)
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Power Ground
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Power Ground
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Negative LVDS differential clock input (Even clock)
Positive LVDS differential clock input (Even clock)
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Power Ground
No contact (For AUO test only)
No contact (For AUO test only)
Power +5V
Power +5V
Power +5V
Power +5V
document version 1.0
15
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
6.3 The Input Data Format
G240HW01 V1
Note1: 8-bits signal input.
Note2: L:NS alike H:Thine alike
document version 1.0
16
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
6.4 Interface Timing
6.4.1 Timing Characteristics
Signal
Item
Clock
Frequency
Frame Rate
Vertical
Section
Frequency
Period
Active
Blanking
Horizontal
Section
Period
Active
Blanking
Note: DE mode only.
Symbol
1/ TClock
1/Tv
TV
TVD
TVB
TH
THD
THB
Min
40
50
1088
1080
8
1034
960
74
Typ
72
60
1120
1080
40
1060
960
100
Max
83
Unit
MHz
75
2047
1080
967
2047
960
1087
Hz
T_line
T_clock
6.4.2 Input Timing Diagram
DOTCLK
TCLOCK
Input Timing Definition ( DE Mode)
Input
Data
Invaild
Data
Pixel
1
Pixel
2
Pixel
3
Pixel
N-1
Pixel
N
Invaild
Data
Pixel
1
DE
THB
THD
TH
DE
TVB
TVD
TV
document version 1.0
17
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
6.5 Power ON/OFF Sequence
VDD power and B/L on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system
shall be Hi-Z state or low level when VDD is off.
or Analog dimming
Parameter
T1
T2
T3
T4
T5
T6
T7
T8
T9
T10
T11
T12
T13
Power ON/OFF sequence timing
Value
Min. Typ. Max.
0.5 --
10
30 40 50
200 --
--
0.5 --
10
10 --
--
10 --
--
0 -- --
10 --
--
-- -- 10
110 --
--
0 16 50
-- -- 10
1000
--
--
Units
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off
the power when you plug the cable into the input connector or pull the cable out of the connector.
document version 1.0
18
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
7. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of accommodating the
following signals and will be following components.
7.1 TFT LCD Module: LVDS Connector
Connector Name / Designation
Manufacturer
Type Part Number
Mating Housing Part Number
Interface Connector / Interface card
JAE or compatible
JAE (FI-XB30SRL-HF11) or equivalent.
FI-X30HL (JAE) or compatible
Pin#
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
Signal Name
RxOIN0-
RxOIN1-
RxOIN2-
GND
RxOCLKIN+
RxOIN3+
RxEIN0+
RxEIN1-
GND
RxEIN2+
RxECLKIN+
RxEIN3+
NC
VDD
VDD
Pin#
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
Signal Name
RxOIN0+
RxOIN1+
RxOIN2+
RxOCLKIN-
RxOIN3-
RxEIN0-
GND
RxEIN1+
RxEIN2-
RxECLKIN-
RxEIN3-
GND
NC
VDD
VDD
document version 1.0
19
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
7.2 Backlight Unit: LED Connector
Connector Name / Designation
Manufacturer
Connector Model Number
Mating Housing Part Number
LED Connector
Sin Sheng or compatible
MS24049HJ
P24049 or compatible
PIN #
1
2
3
4
5
6
7
8
9
SIGNAL NAME
V12
V12
V12
---
GND
GND
GND
BL_EN
BL_DIM_P
DESCRIPTION
Input voltage, 12V
Input voltage, 12V
Input voltage, 12V
NC
Ground
Ground
Ground
Back light enable, 3~5.5 V
Back light dimming, 3~5.5 V
G240HW01 V1
document version 1.0
20
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
8. Reliability Test
Environment test conditions are listed as following table.
Items
Temperature Humidity Bias (THB)
High Temperature Operation (HTO)
Low Temperature Operation (LTO)
High Temperature Storage (HTS)
Low Temperature Storage (LTS)
Vibration Test
(Non-operation)
Required Condition
Ta= 50, 80%RH, 300hours
Ta= 70฀, 300hours
Ta= -20฀, 300hours
Ta= 80฀, 300hours
Ta= -30฀, 300hours
Acceleration: 1.5 Grms
Wave: Random
Frequency: 10 - 200 Hz
Duration: 30 Minutes each Axis (X, Y, Z)
Note
Shock Test
(Non-operation)
Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)
Drop Test
Thermal Shock Test (TST)
On/Off Test
ESD (Electro Static Discharge)
Height: 46 cm, package test
-20฀/30min, 60฀/30min, 100 cycles
On/10sec, Off/10sec, 30,000 cycles
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
8 points, 25 times/ point.
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
8 points, 25 times/ point.
1
Altitude Test
Operation:10,000 ft
Non-Operation:30,000 ft
Note 1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost
Self-recoverable. No hardware failures.
Note2:
Water condensation is not allowed for each test items.
Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test.
The reliability test is performed only to examine the TFT-LCD module capability.
To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24
hours at least in advance.
No function failure occurs.
document version 1.0
21
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
9. Mechanical Characteristics
G240HW01 V1
document version 1.0
22
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
*xxxxxxxxxxxx-xxxxxx*
G240HW01 V1
xxxxx (xxx)
G240HW01 V1
10.2 Carton Package
The outside dimension of carton is 413 x 282x 661 (mm).
8 pieces per carton box.
2*4 boxes per layer. By air, 2 layer / pallet. By sea, refer packing documents. Pallet size (not include carton boxes):
1150 mm * 840 mm * 132 mm
document version 1.0
23
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29


G240HW01-V1 (AUO)
Color TFT-LCD

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G240HW01 V1
11. Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used,
they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability
rating will be printed on the printed circuit board.
11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from
being inserted backwards.
11.4 National Test Lab Requirement
The display module will satisfy all requirements for compliance to:
UL 1950, First Edition
U.S.A. Information Technology Equipment
document version 1.0
24
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/05/29




G240HW01-V1.pdf
Click to Download PDF File