1.5SMC100C (PAN JIT)
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

No Preview Available !

Click to Download PDF File for PC

1.5SMC SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR PEAK PULSE POWER 1500 Watts
BREAK DOWN VOLTAGE
6.8 to 250 Volts
FEATURES
• Plastic package has Underwriters Laboratory Flammability Classification 94V-O
• Glass passivated chip junction in SMC/DO-214AB package
• 1500W surge capability at 1.0ms
• Excellent clamping capability
• Low zener impedance
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• High temperature soldering guaranteed: 260°C/10 seconds/.375" ,(9.5mm)
lead length/5lbs., (2.3kg) tension
• Lead free in comply with EU RoHS 2002/95/EC directives
• Green molding compound as per IEC61249 Std. . (Halogen Free)
0 . 2 8 0 ( 7 . 11 )
0.260(6.60)
0.012(0.305)
0.006(0.152)
MECHANICAL DATA
• Case: JEDEC SMC/DO-214AB molded plastic
• Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
• Polarity: Color band denotes cathode end
• Mounting Position: Any
• Weight: 0.007 ounce, 0.021 gram
0.050(1.27)
0.030(0.76)
0.008(0.203)
0.002(0.051)
0.320(8.13)
0.305(7.75)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types 1.5SMC6.8 thru types 1.5SMC250.
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified.
Rating
Peak Power Dissipation at T =25OC, T =1ms (Notes 1)
AP
Typical Thermal Resistance Junction to Air (Notes 2)
Peak Pulse Current on 10/1000μs waveform (Notes 1)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JECED Method) (Notes 3)
Operating Junction and Storage Temperature Range
Symbol
P
PP
RθJA
I
PPM
I FSM
TJ,TSTG
Value
1500
50
see Table
200
-55 to +150
Units
Watts
OC / W
Amps
Amps
OC
NOTES:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2.
2. Mounted on Copper Leaf area of 0.79 in2(20mm2).
3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
4. A transient suppressor is selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC
or continuous peak operating voltage level.
November 12,2012-REV.06
PAGE . 1


1.5SMC100C (PAN JIT)
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

No Preview Available !

Click to Download PDF File for PC

1.5SMC SERIES
Part Number
R e ve r s e
S ta nd -o ff
Vo l ta g e
V RWM(Notes 4)
UNI BI
1500W Transient Voltage Suppressor
V
1.5SMC6.8
1.5SMC6.8A
1.5SMC7.5
1.5SMC7.5A
1.5SMC8.2
1.5SMC8.2A
1.5SMC9.1
1.5SMC9.1A
1.5SMC10
1.5SMC10A
1.5SMC11
1.5SMC11A
1.5SMC12
1.5SMC12A
1.5SMC13
1.5SMC13A
1.5SMC15
1.5SMC15A
1.5SMC16
1.5SMC16A
1.5SMC18
1.5SMC18A
1.5SMC20
1.5SMC20A
1.5SMC22
1.5SMC22A
1.5SMC24
1.5SMC24A
1.5SMC27
1.5SMC27A
1.5SMC30
1.5SMC30A
1.5SMC33
1.5SMC33A
1.5SMC36
1.5SMC36A
1.5SMC39
1.5SMC39A
1.5SMC43
1.5SMC6.8C
1.5SMC6.8CA
1.5SMC7.5C
1.5SMC7.5CA
1.5SMC8.2C
1.5SMC8.2CA
1.5SMC9.1C
1.5SMC9.1CA
1.5SMC10C
1.5SMC10CA
1.5SMC11C
1.5SMC11CA
1.5SMC12C
1.5SMC12CA
1.5SMC13C
1.5SMC13CA
1.5SMC15C
1.5SMC15CA
1.5SMC16C
1.5SMC16CA
1.5SMC18C
1.5SMC18CA
1.5SMC20C
1.5SMC20CA
1.5SMC22C
1.5SMC22CA
1.5SMC24C
1.5SMC24CA
1.5SMC27C
1.5SMC27CA
1.5SMC30C
1.5SMC30CA
1.5SMC33C
1.5SMC33CA
1.5SMC36C
1.5SMC36CA
1.5SMC39C
1.5SMC39CA
1.5SMC43C
5.5
5.8
6.05
6.4
6.63
7.02
7.37
7.78
8.1
8.55
8.92
9.4
9.72
10.2
10.5
11.1
12.1
12.8
12.9
13.6
14.5
15.3
16.2
17.1
17.8
18.8
19.4
20.5
21.8
23.1
24.3
25.6
26.8
28.2
29.1
30.8
31.6
33.3
34.8
Breakdown
Voltage
V BR @ IT
Min.
V
Max.
V
6.12 7.48
6.45 7.14
6.75 8.25
7.13 7.88
7.38 9.02
7.79 8.61
8.19 10
8.65 9.5
9 11
9.5 10.5
9.9 12.1
10.5 11.6
10.8 13.2
11.4 12.6
11.7 14.3
12.4 13.7
13.5 16.5
14.3 15.8
14.4 17.6
15.2 16.8
16.2 19.8
17.1 18.9
18 22
19 21
19.8 24.2
20.9 23.1
21.6 26.4
22.8 25.2
24.3 29.7
25.7 28.4
27 33
28.5 31.5
29.7 36.3
31.4 34.7
32.4 39.6
34.2 37.8
35.1 42.9
37.1 41
38.7 47.3
Test Current
IT
mA
10
10
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reverse Leakage
IR @ VRWM
UNI BI
μA μA
1000
1000
500
500
200
200
50
50
10
10
5
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2000
2000
1000
1000
400
400
100
100
20
20
10
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Max. Clamp
Voltage
10/1000μs
Peak Pulse
Current
10/1000μs
VC @ IPP
IPP
VA
10.8 139
10.5 143
11.7 128
11.3 132
12.5 120
12.1 124
13.8 109
13.4 112
15 100
14.5 103
16.2 93
15.6 96
17.3 87
16.7 90
19 79
18.2 82
22 68
21.2 71
23.5 64
22.5 67
26.5 56.5
25.2 59.5
29.1 51.5
27.7 54
31.9 47
30.6 49
34.7 43
33.2 45
39.1 38.5
37.5 40
43.5 34.5
41.4 36
47.7 31.5
45.7 33
52 29
49.9 30
56.4 26.5
53.9 28
61.9 24
Marking
Code
UNI BI
FZA
FZB
FZC
FZD
FZE
FZF
FZG
FZH
FZJ
FZK
FZL
FZM
FZN
FZP
FZQ
FZR
FZS
FZT
FZU
FZV
FZW
FZX
FZY
FZZ
FXA
FXB
FXC
FXD
FXE
FXF
FXG
FXH
FXJ
FXK
FXL
FXM
FXN
FXP
FXQ
JZA
JZB
JZC
JZD
JZE
JZF
JZG
JZH
JZJ
JZK
JZL
JZM
JZN
JZP
JZQ
JZR
JZS
JZT
JZU
JZV
JZW
JZX
JZY
JZZ
JXA
JXB
JXC
JXD
JXE
JXF
JXG
JXH
JXJ
JXK
JXL
JXM
JXN
JXP
JXQ
November 12,2012-REV.06
PAGE . 2


1.5SMC100C (PAN JIT)
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

No Preview Available !

Click to Download PDF File for PC

1.5SMC SERIES
Part Number
Reverse
Stand-off
Voltage
V RWM(Notes 4)
UNI BI
1500W Transient Voltage Suppressor
1.5SMC43A
1.5SMC47
1.5SMC47A
1.5SMC51
1.5SMC51A
1.5SMC56
1.5SMC56A
1.5SMC62
1.5SMC62A
1.5SMC68
1.5SMC68A
1.5SMC75
1.5SMC75A
1.5SMC82
1.5SMC82A
1.5SMC91
1.5SMC91A
1.5SMC100
1.5SMC100A
1.5SMC110
1.5SMC110A
1.5SMC120
1.5SMC120A
1.5SMC130
1.5SMC130A
1.5SMC150
1.5SMC150A
1.5SMC160
1.5SMC160A
1.5SMC170
1.5SMC170A
1.5SMC180
1.5SMC180A
1.5SMC200
1.5SMC200A
1.5SMC220
1.5SMC220A
1.5SMC250
1.5SMC250A
1.5SMC43CA
1.5SMC47C
1.5SMC47CA
1.5SMC51C
1.5SMC51CA
1.5SMC56C
1.5SMC56CA
1.5SMC62C
1.5SMC62CA
1.5SMC68C
1.5SMC68CA
1.5SMC75C
1.5SMC75CA
1.5SMC82C
1.5SMC82CA
1.5SMC91C
1.5SMC91CA
1.5SMC100C
1.5SMC100CA
1.5SMC110C
1.5SMC110CA
1.5SMC120C
1.5SMC120CA
1.5SMC130C
1.5SMC130CA
1.5SMC150C
1.5SMC150CA
1.5SMC160C
1.5SMC160CA
1.5SMC170C
1.5SMC170CA
1.5SMC180C
1.5SMC180CA
1.5SMC200C
1.5SMC200CA
1.5SMC220C
1.5SMC220CA
1.5SMC250C
1.5SMC250CA
V
36.8
38.1
40.2
41.3
43.6
45.6
47.8
50.2
53
55.1
58.1
60.7
64.1
66.4
70.1
73.7
77.8
81
85.5
89.2
94
97.2
102
105
111
121
128
130
136
138
145
146
154
162
171
175
185
202
214
Breakdown
Voltage
Test Current
V BR @ IT
M i n.
V
Ma x.
V
IT
mA
40.9 45.2
42.3 51.7
44.7 49.4
45.9 56.1
48.5 53.6
50.4 61.6
53.2 58.8
55.8 68.2
58.9 65.1
61.2 74.8
64.6 71.4
67.5 82.5
71.3 78.8
73.8 90.2
77.9 86.1
81.9 100
86.5 95.5
90 110
95 105
99 121
105 116
108 132
114 126
117 143
124 137
135 165
143 158
144 176
152 168
153 187
162 179
162 198
171 189
180 220
190 210
198 242
209 231
225 275
237 263
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Reverse Leakage
IR @ VRWM
UNI BI
μA μA
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
November 12,2012-REV.06
Max. Clamp
Voltage
10/1000μs
Peak Pulse
Current
10/1000μs
VC @ IPP
IPP
VA
Marking
Code
UNI BI
59.3 25.3 FXR JXR
67.8 22.2 FXS JXS
64.8 23.2 FXT JXT
73.5 20.4 FXU JXU
70.1 21.4 FXV JXV
80.5 18.6 FXW JXW
77 19.5 FXX JXX
89 16.9 FXY JXY
85 17.7 FXZ JXZ
98 15.3 FYA JYA
92 16.3 FYB JYB
108 13.9 FYC JYC
103 14.6 FYD JYD
118 12.7 FYE JYE
113 13.3 FYF JYF
131 11.4 FYG JYG
125 12 FYH JYH
144 10.4 FYJ
JYJ
137 11 FYK JYK
158 9.5 FYL JYL
152 9.9 FYM JYM
173 8.7 FYN JYN
165 9.1 FYP JYP
187 8 FYQ JYQ
179 8.4 FYR JYR
215 7 FYS JYS
207 7.2 FYT JYT
230 6.5 FYU JYU
219 6.8 FYV JYV
244
6.2
FYW
JYW
234 6.4 FYX JYX
258 5.8 FYY JYY
246 6.1 FYZ JYZ
287
5.2
FWA
JWA
274
5.5
FWB
JWB
344
4.3
FWC
JWC
328
4.6
FWD
JWD
360
4.3
FWE
JWE
344
4.5
FWF
JWF
PAGE . 3


1.5SMC100C (PAN JIT)
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

No Preview Available !

Click to Download PDF File for PC

1.5SMC SERIES
100
10
Non-Repetitve
Pulse Wavefom
Shown in Figure.3
TA = 25 OC
1.0
0.1
0.1
1.0
10
100
1000
10000
td,PULSE WIDTH,usec
Fig.1 PEAK PULSE POWER RATING VERSUS
PULSE TIME CURVE
150
100
tf= 10u se c
Pea k Va lue
Ip p m
TA = 25 C
Pulse Wid th (td ) is Define d
a s the Point Where t he Pea k
Current De c a ys to 5 0% of Ip p
Ha lf Va lue -Ip p
2
50
10/1000u se c Wa ve form
a s Defined b ye R.E.A.
0
0
td
1.0 2.0
T,TIME,ms
e-kt
3.0
Fig.3 PULSE WAVEFORM
4.0
200
100
50
Tj= Tj m a x
8.3ms SINGLE HALF sinc e -WAVE
JEDEC METHOD
100
75
50
25
0
0 25 50 75 100 125 150 175 200
TA,AMBIENT TEMPERATURE,OC
Fig.2 PULSE DERATING CURVE
104
1,000
Tj= 25 C
f= 1.0MHZ
Vsig = 50mVp -p
Me a sured a t
Zero Bia s
100
Unidirectional
Bidirectional
10
5.0 10
20
Me a sure d a t
Sta nd -Off
Vo lta ge (V RWM )
50 100 200
500
V(BR), BREAKDOWN VOLTAGE, VOLTS
Fig.4 TYPICAL JUNCTION CAPACITANCE
UNIDIRECTIONAL ONLY
10
1 5 10
50 100
NUMBER OF CYCLES AT 60 Hz
Fig.5 MAXIMUN NON-REPETITEVE PEAK FORWARD
SURGE CURRENT UNIDIRECTIONAL
November 12,2012-REV.06
PAGE . 4


1.5SMC100C (PAN JIT)
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

No Preview Available !

Click to Download PDF File for PC

1.5SMC SERIES
MOUNTING PAD LAYOUT
ORDER INFORMATION
• Packing information
T/R - 3K per 13" plastic Reel
T/R - 0.5K per 7" plastic Reel
November 12,2012-REV.06
PAGE . 5


1.5SMC100C (PAN JIT)
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

No Preview Available !

Click to Download PDF File for PC

1.5SMC SERIES
Part No_packing code_Version
1.5SMC6.8_R1_00001
1.5SMC6.8_R2_00001
For example :
RB500V-40_R2_00001
Part No.
Serial number
Version code means HF
Packing size code means 13"
Packing type means T/R
Packing Code XX
Version Code XXXXX
Packing type
1st Code
Packing size code
2nd Code HF or RoHS 1st Code 2nd~5th Code
Tape and Ammunition Box
(T/B)
A
N/A
0
Tape and Reel
(T/R)
R
7"
1
Bulk Packing
(B/P)
B
13"
2
Tube Packing
(T/P)
T
26mm
X
Tape and Reel (Right Oriented)
(TRR)
S
52mm
Y
Tape and Reel (Left Oriented)
(TRL)
L
PANASERT T/B CATHODE UP
(PBCU)
U
FORMING
F
PANASERT T/B CATHODE DOWN
(PBCD)
D
HF
RoHS
0 serial number
1 serial number
November 12,2012-REV.06
PAGE . 6


1.5SMC100C (PAN JIT)
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

No Preview Available !

Click to Download PDF File for PC

1.5SMC SERIES
Disclaimer
Reproducing and modifying information of the document is prohibited without permission
from Panjit International Inc..
Panjit International Inc. reserves the rights to make changes of the content herein the
document anytime without notification. Please refer to our website for the latest
document.
Panjit International Inc. disclaims any and all liability arising out of the application or use of
any product including damages incidentally and consequentially occurred.
Panjit International Inc. does not assume any and all implied warranties, including warranties
of fitness for particular purpose, non-infringement and merchantability.
Applications shown on the herein document are examples of standard use and operation.
Customers are responsible in comprehending the suitable use in particular applications.
Panjit International Inc. makes no representation or warranty that such applications will be
suitable for the specified use without further testing or modification.
The products shown herein are not designed and authorized for equipments requiring high
level of reliability or relating to human life and for any applications concerning life-saving
or life-sustaining, such as medical instruments, transportation equipment, aerospace
machinery et cetera. Customers using or selling these products for use in such applications
do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages
resulting from such improper use or sale.
Since Panjit uses lot number as the tracking base, please provide the lot number for tracking
when complaining.
November 12,2012-REV.06
PAGE . 7




1.5SMC100C.pdf
Click to Download PDF File