SGL41-20 (Vishay)
Surface Mount Schottky Barrier Rectifier

No Preview Available !

Click to Download PDF File for PC

www.vishay.com
BYM13-xx, SGL41-xx
Vishay General Semiconductor
Surface Mount Schottky Barrier Rectifier
DO-213AB
PRIMARY CHARACTERISTICS
IF(AV)
VRRM
IFSM
VF
TJ max.
Package
1.0 A
20 V to 60 V
30 A
0.50 V, 0.70 V
125 °C, 150 °C
DO-213AB
Diode variations
Single
FEATURES
• MELF Schottky rectifier
• Ideal for automated placement
• Guardring for overvoltage protection
• Low power losses, high efficiency
• Low forward voltage drop
• High surge capability
• Meets MSL level 1, per J-STD-020, LF maximum peak of
250 °C
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage high frequency inverters,
freewheeling, DC/DC converters, and polarity protection
applications
MECHANICAL DATA
Case: DO-213AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Two bands indicate cathode end 1st band denotes
device type 2nd band denotes voltage type
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 UNIT
DENOTES SCHOTTKY DEVICES: 1st BAND IS
ORANGE
SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60
Polarity color bands (2nd band) voltage type
Gray
Red
Orange Yellow
Green
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current (fig. 1)
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
VRRM
20
30
40
50
60 V
VRMS
14
21
28
35
42 V
VDC 20 30 40 50 60 V
IF(AV)
1.0 A
IFSM
30 A
Voltage rate of change (rated VR)
Operating junction temperature range
Storage temperature range
dV/dt
TJ
TSTG
10 000
- 55 to + 125
- 55 to + 150
- 55 to + 150
V/μs
°C
°C
Reivision: 13-Aug-13
1 Document Number: 88548
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


SGL41-20 (Vishay)
Surface Mount Schottky Barrier Rectifier

No Preview Available !

Click to Download PDF File for PC

www.vishay.com
BYM13-xx, SGL41-xx
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60
SYMBOL
SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60
Maximum instantaneous
forward voltage (1)
1.0 A
VF 0.50 0.50 0.50 0.70 0.70
Maximum reverse
current at rated DC
blocking voltage (1)
TA = 25 °C
TA = 100 °C
IR
0.5
10
5.0
Typical junction
capacitance
4.0 V, 1.0 MHz
CJ
110
80
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
UNIT
V
mA
pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60
SYMBOL
SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60
Maximum thermal resistance (1)
RJA
RJT
75
30
Note
(1) Thermal resistance junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
UNIT
°C/W
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE
SGL41-40-E3/96
0.137
96
SGL41-40-E3/97
0.137
97
BYM13-40-E3/96
0.137
96
BYM13-40-E3/97
0.137
97
SGL41-40HE3/96 (1)
SGL41-40HE3/97 (1)
0.137
0.137
96
97
BYM13-40HE3/96 (1)
0.137
96
BYM13-40HE3/97 (1)
0.137
97
Note
(1) AEC-Q101 qualified
BASE QUANTITY
1500
5000
1500
5000
1500
5000
1500
5000
DELIVERY MODE
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 C unless otherwise noted)
1.0
0.75
SGL41-20 to SGL41-40
0.50
SGL41-50 and SGL41-60
Resistive or
Inductive Load
30
At Rated Td
8.3 ms Single Half Sine-Wave
25
20
15
0.25
PCB Mounted on
0.24" x 0.24" (6.0 mm x 6.0 mm)
Copper Land Areas
0
0 25 50 75 100 125
Terminal Temperature (°C)
150
175
Fig. 1 - Forward Current Derating Curve
10
5
1 10 100
Number of Cycles at 60 Hz
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Reivision: 13-Aug-13
2 Document Number: 88548
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


SGL41-20 (Vishay)
Surface Mount Schottky Barrier Rectifier

No Preview Available !

Click to Download PDF File for PC

www.vishay.com
BYM13-xx, SGL41-xx
Vishay General Semiconductor
100
TJ = 125 °C
10
TJ = 150 °C
1
Pulse Width = 300 µs
1 % Duty Cycle
TJ = 25 °C
0.1
0.01
0
SGL41-20 to SGL41-40
SGL41-50 and SGL41-60
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Instantaneous Forward Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
100
SGL41-20 to SGL41-40
SGL41-50 and SGL41-60
10
1 TJ = 125 °C
0.1
TJ = 75 °C
0.01
TJ = 25 °C
0.001
0
20 40 60 80 100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Characteristics
1000
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
0.1
SGL41-20 to SGL41-40
SGL41-50 and SGL41-60
1 10
Reverse Voltage (V)
100
Fig. 5 - Typical Junction Capacitance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
Solderable Ends
1st Band
DO-213AB
D2
=
D1
+
-
0
0.008
(0.20)
Mounting Pad Layout
0.138 (3.5) MAX.
D2
D1
=
0.105
0.095
(2.67)
(2.41)
0.118 (3.0) MIN.
0.022 (0.56)
0.018 (0.46)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185 (4.7)
1st band denotes type and positive end (cathode)
0.049 (1.25) MIN.
0.238 (6.0) REF.
Reivision: 13-Aug-13
3 Document Number: 88548
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


SGL41-20 (Vishay)
Surface Mount Schottky Barrier Rectifier

No Preview Available !

Click to Download PDF File for PC

www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Revision: 13-Jun-16
1 Document Number: 91000




SGL41-20.pdf
Click to Download PDF File