G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( v ) Final Specifications
Module
Model Name
19” Inch Color TFT-LCD
G190ETN01.6
G190ETN01.6
Customer
Date
Checked &
Approved by
Date
Customer’s sign back page
Approved by
Date
Crystal Hsieh
2016/10/14
Prepared by
Date
Michelle Liau
2016/10/14
General Display Business Division /
AU Optronics corporation
G190ETN01.6 rev 1.0
1/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
Contents
1. Operating Precautions .....................................................................................4
2. General Description..........................................................................................5
2.1 Display Characteristics....................................................................................................... 5
2.2 Optical Characteristics ....................................................................................................... 6
3. Functional Block Diagram................................................................................9
4. Absolute Maximum Ratings ...........................................................................10
4.1 Absolute Ratings of TFT LCD Module.............................................................................. 10
4.2 Absolute Ratings of Environment..................................................................................... 10
5. Electrical Characteristics ...............................................................................11
5.1 TFT LCD Module ............................................................................................................. 11
5.2 Backlight Unit ................................................................................................................... 13
6. Signal Characteristic ......................................................................................15
6.1 Pixel Format Image.......................................................................................................... 15
6.2 Scanning Direction........................................................................................................... 15
6.3 Signal Description ............................................................................................................ 16
6.4 The Input Data Format..................................................................................................... 18
6.5 Interface Timing ............................................................................................................... 19
6.6 Power ON/OFF Sequence ............................................................................................... 21
7. Reliability Test Criteria ...................................................................................22
8. Mechanical Characteristics............................................................................23
8.1 LCM Outline Dimension ................................................................................................... 23
9. Label and Packaging ......................................................................................24
9.1 Shipping Label (on the rear side of TFT-LCD display) ..................................................... 24
9.2 Carton Package ............................................................................................................... 24
G190ETN01.6 rev 1.0
2/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
Record of Revision
Version
Date
(yyyy/m/d)
Page
Old description
1.0 Oct. 14, 2016 All Preliminary Spec. v0.1
New Description
First draft Final specification
(For GD product spec. readjustment.
Some contents are different from
preliminary spec. V0.1)
G190ETN01.6 rev 1.0
3/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken out from the
container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED
light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please
design your display product well to avoid external force applying to module by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The TFT-LCD module
should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be
applied exemption.
13) Severe temperature condition may result in different luminance, response time and lamp ignition voltage.
14) Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion
and reduce luminance dramatically.
15) The data on this specification sheet is applicable when LCD module is placed in landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen saver or shuffle
content periodically if fixed pattern is displayed on the screen.
17) Highlight model usage, please be careful the high temperature burn prevention.
G190ETN01.6 rev 1.0
4/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
2. General Description
G190ETN01.6 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD panel, a driver circuit, and a
backlight system. The screen format is intended to support the SXGA (1280(H) x 1024(V)) screen and 16.7M colors
(RGB 6-bits + HiFRC data). All input signals are 2-channel LVDS interface.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 oC condition:
Items
Screen Diagonal
Active Area
Resolution
Pixel Pitch
Pixel Arrangement
Display Mode
Nominal Input Voltage VDD
Power Consumption
Unit
[inch]
[mm]
[mm]
[Volt]
[Watt]
Specifications
482.6 (19.0")
376.32 (H) x 301.06 (V)
1280(x3) x 1024
0.294 (per one triad) x 0.294
R.G.B. Vertical Stripe
TN
+5.0 V
Logic power6@ Pattern at 60Hz
BLU power44
Weight
Physical Size
Electrical Interface
Surface Treatment
[Grams]
[mm]
Max 2120
396 (H) x 324.26 (V) x 26.69 (D) (Typ)
Dual channel LVDS
Anti- Reflection, Hardness 2H
Support Color
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
16.7M colors (RGB 6-bit + Hi_FRC)
[oC]
[oC]
-30 to +70
-30 to +70
Yes
G190ETN01.6 rev 1.0
5/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 oC (Room Temperature):
Item
Unit Conditions Min. Typ. Max.
White Luminance
cd/m2 ILED=90mA(center point)
1280 1600
-
Uniformity
Contrast Ratio
Response Time
Viewing Angle
%
--
msec
9 points
Rising
Falling
Rising + Falling
degree
Horizontal
CR >= 10
Vertical
CR >= 5
Red x
(Right)
(Left)
(Upper)
(Lower)
75
600
-
-
-
75
75
70
70
0.590
80
1000
-
-
10
85
85
80
80
0.640
-
-
-
-
20
-
-
-
-
0.690
Red y
0.295 0.345 0.399
Green x
0.275 0.325 0.375
Color / Chromaticity
Coordinates
(CIE 1931)
Green y
-- Blue x
0.565
0.100
0.615
0.150
0.665
0.200
Blue y
0.009 0.059 0.109
White x
0.260 0.310 0.360
White y
0.270 0.320 0.370
Color Gamut
%
70
Note
1
2,3
4
5
6
4
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
1with 50cm viewing distance
Test Point Center
Environment < 1 lux
LCD Module
SR_3 or
equivalent
Measuring distance
Module Driving Equipment
G190ETN01.6 rev 1.0
6/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
Note 2: Definition of 9 points position
G190ETN01.6
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum
test point luminance
Minimum Brightness of nine points
Uniformity
=
Maximum Brightness of nine points
Note 4: Definition of contrast ratio (CR):
Contrast ratio (CR)= Brightness on the “White” state
Brightness on the “Black” state
Note 5: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black”
(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and
90% of amplitudes. Please refer to the figure as below.
% TrF
TrR
Optical
response
100
90
10
0
W hite
Black
W hi te
Note 6: Definition of viewing angle
G190ETN01.6 rev 1.0
7/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and 180°
vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ)
horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically
perpendicular to the display surface with the screen rotated to its center to develop the desired measurement
viewing angle.
G190ETN01.6 rev 1.0
8/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
3. Functional Block Diagram
The following diagram shows the functional block of the 19.0 inch color TFT/LCD module:
G190ETN01.6 rev 1.0
9/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item
Logic/LCD drive Voltage
Note: With in Ta (25 oC)
Symbol
Vin
Min
-0.3
Max
+6.0
Unit
[Volt]
4.2 Absolute Ratings of Environment
Item
Symbol
Min
Max
Operating Temperature
TOP
-30
+70
Operation Humidity
HOP
5
95
Storage Temperature
TST
-30
+70
Storage Humidity
HST
5
95
Note: Maximum Wet-Bulb should be 39 oC and no condensation.
Unit
[oC]
[%RH]
[oC]
[%RH]
G190ETN01.6
G190ETN01.6 rev 1.0
10/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are shown as follows ;
Symbol
Parameter
Min Typ Max Units
G190ETN01.6
Remark
VDD Logic/LCD Drive Voltage 4.5 5.0 5.5 [Volt]
IDD VDD Current
All Black Pattern
- 1 1.2 [A] (VDD=5.0V, at 60Hz)
Irush
LCD Inrush Current
PDD
VDD Power
VDDrp
Allowable Logic/LCD
Drive Ripple Voltage
- - 3 [A] Note 1
All Black Pattern
- - 6 [Watt] (VDD=5.0V, at 60Hz)
-
-
200
[mV]
p-p
All Black Pattern
(VDD=5.0V, at 60Hz)
Note 1: Measurement condition:
VDD
90%
5.0V
10%
0V
0.47ms+ 10%
VDD rising time
G190ETN01.6 rev 1.0
11/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
5.1.2 LVDS DC Signal Electrical Characteristics
Please refer to specifications of SN75LVDS82DGG (Texas Instruments) in detail.
G190ETN01.6
Symbol
Item
VTH
VTL
Differential Input High Threshold
Differential Input Low Threshold
VIDInput Differential Voltage
Min.
-
-100
100
Typ.
-
-
400
Max.
+100
-
600
Unit Remark
[mV] VCM=1.2V, Note
[mV] VCM=1.2V, Note
[mV] Note
VICM Differential Input Common Mode Voltage +1.0 +1.2 +1.5
Input signals shall be low or Hi-Z state when VDD is off.
[V]
VTH/VTL=+-100mV,
Note
Note: LVDS Signal Waveform.
G190ETN01.6 rev 1.0
12/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
5.2 Backlight Unit
5.2.1 LED Backlight Unit : Driver Connector
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
Connector Name / Designation
Manufacturer
Connector Model Number
Mating Model Number
Lamp Connector
CviLux
CI0110M1HR0
CI0110S0000
Pin No.
1
2
3
4
5
6
7
8
9
10
Symbol
Vcc
Vcc
Vcc
Vcc
GND
GND
GND
GND
Enable
Dimming
Description
12V
12V
12V
12V
GND
GND
GND
GND
3.3V-On / 0V-Off
PWM Dimming(140Hz to 240)
5.2.2 LED characteristics
Following characteristics are measured under a stable condition using an inverter at 25(Room
Temperature):
Symbol
PLED
LTLED
Parameter
Backlight Power
Consumption
LED Life-Time
Min
-
50000
Typ
40
-
Max
44
-
Units
[Watt]
Hour
Condition
100% Dimming
Ta = 25oC
Note 1: Calculator value for reference PLED = VF (Normal Distribution) * IF (Normal Distribution) / Efficiency
Note 2: The LED life-time define as the estimated time to 50% degradation of initial luminous.
G190ETN01.6 rev 1.0
13/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
5.2.3 Backlight input signal characteristics
Symbol
VLED
(Note 1)
VLED_EN
VPWM_EN
FPWM
Parameter
LED Power Supply
LED Enable Input
High Level
LED Enable Input
Low Level
PWM Logic Input
High Level
PWM Logic Input
Low Level
PWM Input Frequency *1
Duty
PWM Duty Ratio
Note1: Measured on panel VLED
Min Typ Max
5.0 12.0 21.0
2.5 -- 5.5
-- -- 0.7
2.5 -- 5.5
-- -- 0.7
0.2 1 20
5 -- 100
G190ETN01.6
Units
[Volt]
[Volt]
[Volt]
[Volt]
[Volt]
KHz
%
Remark
Define as
Connector
Interface
(Ta=25)
5.2.4 Backlight Driver Board Outline
Pin 1
Pin 10
Backlight light bar
Insert Direction
G190ETN01.6 rev 1.0
14/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel format.
G190ETN01.6
12
1st Line R G B R G B
1279 1280
RGB RGB
1024th Line R G B R G B
RGB RGB
6.2 Scanning Direction
The following figures show the image seen from the front view. The arrow indicates the direction of scan.
Fig. 1 Normal scan (Pin4, DPS = Low or NC)
G190ETN01.6 rev 1.0
15/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
6.3 Signal Description
The module uses a LVDS receiver embedded in AUO’s ASIC. LVDS is a differential signal technology
for LCD interface and a high-speed data transfer device.
6.3.1 TFT LCD Module: LVDS Connector
Connector Name / Designation
Manufacturer
Connector Model Number
Adaptable Plug
Signal Connector
HRS
DF14H-30P-1.25H
DF14H-30S-1.25C
The module using one LVDS receiver SN75LVDS82(Texas Instruments). LVDS is a differential signal
technology for LCD interface and high speed data transfer device. LVDS transmitters shall be
SN75LVDS83(negative edge sampling). The first LVDS port(RxOxxx) transmits odd pixels while the
second LVDS port(RxExxx) transmits even pixels.
Pin no Symbol
1 RxOIN0-
2 RxOIN0+
3 RxOIN1-
4 RxOIN1+
5 RxOIN2-
6 RxOIN2+
7 GND
8 RxOCLKIN-
9 RxOCLKIN+
10 RxOIN3-
11 RxOIN3+
12 RxEIN0-
13 RxEIN0+
14 GND
15 RxEIN1-
16 RxEIN1+
17 GND
18 RxEIN2-
19 RxEIN2+
20 RxECLKIN-
21 RxECLKIN+
22 RxEIN3-
23 RxEIN3+
24 GND
Function
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Odd data, DSPTMG)
Positive LVDS differential data input (Odd data, DSPTMG)
Power Ground
Negative LVDS differential clock input (Odd clock)
Positive LVDS differential clock input (Odd clock)
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Power Ground
Positive LVDS differential data input (Even data)
Negative LVDS differential data input (Even data)
Power Ground
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Negative LVDS differential clock input (Even clock)
Positive LVDS differential clock input (Even clock)
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Power Ground
Remark
G190ETN01.6 rev 1.0
16/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
25 GND
Power Ground
26 GND
Power Ground
27 GND
Power Ground
28 POWER
Power +5V
29 POWER
Power +5V
30 POWER
Power +5V
Note 1: Input Signals shall be in low status when VDD is off.
Note 2: High stands for “3.3V”, Low stands for “0V”, NC means “No Connection”.
Note 3: RSV means “Reserved”.
Note 4: “Power Ground” stands for 0V.
G190ETN01.6
Note1: 30pin start from left side of connector. (Face up)
Note2: Input signals shall be low or High-impedance state when VDD is off.
G190ETN01.6 rev 1.0
17/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
6.4 The Input Data Format
G190ETN01.6
Note1: Normally, DE, VS, HS on EVEN channel are not used.
Note2: Please follow PSWG.
Note3: 8-bit in
G190ETN01.6 rev 1.0
18/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
6.5 Interface Timing
6.5.1 Timing Characteristics
Signal
Clock
Period
Frequency
Vertical
Section
Period
Active
Blanking
Horizontal
Section
Period
Active
Blanking
Frame Rate
Note : DE mode only.
Symbol
Tclk
Freq.
TV
TVD
TVB
TH
THD
THB
F
Min.
44
22.2
1032
1024
8
780
640
140
49
Typ.
54
18.52
1066
1024
42
844
640
204
60
Max.
67.5
14.81
1150
1024
126
2047
640
-
75
G190ETN01.6
Unit
MHz
ns
TLine
TClock
Hz
G190ETN01.6 rev 1.0
19/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
6.5.2 Input Timing Diagram
G190ETN01.6
G190ETN01.6 rev 1.0
20/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
6.6 Power ON/OFF Sequence
VDD power and lamp on/off sequence are as follows. Interface signals are also shown in the chart.
Signals from any system shall be Hi-Z state or low level when VDD is off.
Power Supply VDD
10%
0V
90%
Note 1 Note 2
T2
90%
T5
10%
T7
LVDS Signal
Backlight On
VALID
DATA
T3 T4 Note 3
Note1: insert a white pattern 360ms
Note2: insert a black pattern
Note3: insert a white pattern after valid data and last until VDD falls to 10%.
Note4: when AC on/off, timing rule of logo power on/off is the same as above.
Parameter
T1
T2
T3
T4
T5
T6
T7
Power ON/OFF sequence timing
Value
Units
Min.
0.5
0
500
300
40
-
1000
Typ.
-
40
-
-
1500
-
-
Max.
10
50
-
-
-
-
-
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
[ms]
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to
turn off the power when you plug the cable into the input connector or pull the cable out of the connector.
G190ETN01.6 rev 1.0
21/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
7. Reliability Test Criteria
Items
Temperature Humidity Bias (THB)
High Temperature Operation
(HTO)
Low Temperature Operation (LTO)
High Temperature Storage (HTS)
Low Temperature Storage (LTS)
Required Condition
Ta= 50, 80%RH, 240hours
Ta= 70, 240hours
Ta= -30, 240hours
Ta= 70, 240hours
Ta= -30, 240hours
Vibration Test
(Non-operation)
Acceleration: 1.5 Grms
Wave: Random
Frequency: 10 – 200 Hz
Sweep: 30 Minutes each Axis (X, Y, Z)
G190ETN01.6
Note
3
3
Shock Test
(Non-operation)
Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis) Axis)
Thermal Shock Test (TST)
ESD (Electro-Static Discharge)
-20/30min, 60/30min, 50 cycles
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
9 points, 25 times/ point.
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec,
9 points, 25 times/ point.
1
Note1:
According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost Self-recoverable. No
hardware failures.
Note2:
Water condensation is not allowed for each test items.
Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test.
The reliability test is performed only to examine the TFT-LCD module capability.
To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24
hours at least in advance.
Note 3 :
No function failure occurs at HTO and HTS test
G190ETN01.6 rev 1.0
22/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
8. Mechanical Characteristics
8.1 LCM Outline Dimension
G190ETN01.6
G190ETN01.6 rev 1.0
23/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
9. Label and Packaging
9.1 Shipping Label (on the rear side of TFT-LCD display)
G190ETN01.6
9.2 Carton Package
V5
G190ETN01.6 rev 1.0
24/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24


G190ETN01.6 (AUO)
SXGA TFT-LCD Module

No Preview Available !

Click to Download PDF File for PC

Product Specification
AU OPTRONICS CORPORATION
G190ETN01.6
G190ETN01.6 rev 1.0
25/25
For DATAMODUL Internal Use Only - Provided By pavelkonvalinka On 2017/01/24




G190ETN01.6.pdf
Click to Download PDF File