W9830TJ150 Datasheet PDF - IXYS


www.Datasheet-PDF.com

W9830TJ150
IXYS

Part Number W9830TJ150
Description Rectifier Diode
Page 9 Pages

W9830TJ150 datasheet pdf
View PDF for PC
W9830TJ150 pdf
View PDF for Mobile


No Preview Available !

Date:- 5th February, 2012
Data Sheet Issue:- A1
Provisional Data
Rectifier Diode
Types W9830TJ120 to W9830TJ150
Development Type No.: WX375TJ150
Absolute Maximum Ratings
VRRM
VRSM
VOLTAGE RATINGS
Repetitive peak reverse voltage, (note 1)
Non-repetitive peak reverse voltage, (note 1)
MAXIMUM
LIMITS
1200-1500
1300-1600
UNITS
V
V
OTHER RATINGS
IF(AV)M
IF(AV)M
IF(AV)M
IF(RMS)M
IF(d.c.)
IFSM
IFSM2
I2t
I2t
Tj op
Tstg
Maximum average forward current, Tsink=55°C, (note 2)
Maximum average forward current. Tsink=100°C, (note 2)
Maximum average forward current. Tsink=100°C, (note 3)
Nominal RMS forward current, Tsink=25°C, (note 2)
D.C. forward current, Tsink=25°C, (note 4)
Peak non-repetitive surge tp=10ms, Vrm=60%VRRM, (note 5)
Peak non-repetitive surge tp=10ms, Vrm10V, (note 5)
I2t capacity for fusing tp=10ms, Vrm=60%VRRM, (note 5)
I2t capacity for fusing tp=10ms, Vrm10V, (note 5)
Operating temperature range
Storage temperature range
Notes:-
1) De-rating factor of 0.13% per °C is applicable for Tj below 25°C.
2) Double side cooled, single phase; 50Hz, 180° half-sinewave.
3) Cathode side cooled, single phase; 50Hz, 180° half-sinewave.
4) Double side cooled.
5) Half-sinewave, 190°C Tj initial.
MAXIMUM
LIMITS
9830
7605
4075
17480
15450
72.0
80.0
51.5 x 106
32.0 x 106
-40 to +190
-55 to +190
UNITS
A
A
A
A
A
kA
kA
A2s
A2s
°C
°C
Provisional Data Sheet. Types W9830TJ120 to W9830TJ150 Issue A1
Page 1 of 9
February, 2013



No Preview Available !

Characteristics
Rectifier Diode Types W9830TJ120 to W9830TJ150
PARAMETER
VFM Maximum peak forward voltage
VFM Maximum peak forward voltage
VT0 Threshold voltage
rT Slope resistance
IRRM Peak reverse current
Qrr Recovered charge
Qra Recovered charge, 50% Chord
Irm Reverse recovery current
trr Reverse recovery time, 50% chord
RthJK Thermal resistance, junction to heatsink
F Mounting force
Wt Weight
MIN.
-
-
-
-
-
-
-
-
-
-
-
-
60
TYP. MAX. TEST CONDITIONS (Note 1)
-
-
-
-
-
3700
3000
200
30
-
-
-
-
1.15
0.95 IFM=6800A
1.24 IFM=17000A
0.67
Valid from 2000A to 6000A
0.043
100 Rated VRRM
4250
- ITM=2000A, tp=2000µs, di/dt=10A/µs,
- Vr=100V
-
0.008 Double side cooled
0.013 Anode side cooled
0.020 Cathode side cooled
70 Note 2
Notes:-
1) Unless otherwise indicated Tj=190°C.
2) For other clamp forces, please consult factory.
UNITS
V
V
V
m
mA
µC
µC
A
µs
K/W
K/W
K/W
kN
Kg
Provisional Data Sheet. Types W9830TJ120 to W9830TJ150 Issue A1
Page 2 of 9
February, 2013



No Preview Available !

Rectifier Diode Types W9830TJ120 to W9830TJ150
Notes on Ratings and Characteristics
1.0 Voltage Grade Table
Voltage Grade
12
15
VRRM
V
1200
1500
VRSM
V
1300
1600
VR
DC V
720
900
2.0 Extension of Voltage Grades
This report is applicable to other voltage grades when supply has been agreed by Sales/Production.
3.0 De-rating Factor
A blocking voltage de-rating factor of 0.13%/°C is applicable to this device for Tj below 25°C.
4.0 Snubber Components
When selecting snubber components, care must be taken not to use excessively large values of snubber
capacitor or excessively small values of snubber resistor. Such excessive component values may lead to
device damage due to the large resultant values of snubber discharge current. If required, please consult
the factory for assistance.
5.0 Computer Modelling Parameters
5.1 Device Dissipation Calculations
I AV = −VT 0 +
VT
2
0
+
4
ff
2
rT
WAV
2 ff 2 rT
and:
Where VT0=0.67V, rT=0.043mΩ,
Rth = Supplementary thermal impedance, see table below and
ff = Form factor, see table below.
WAV
=
T
Rth
T = Tj max TK
Supplementary Thermal Impedance
Conduction Angle
6 phase (60°) 3 phase (120°)
Square wave Double Side Cooled
0.00866
0.00847
Square wave Cathode Side Cooled
0.02118
0.02101
Sine wave Double Side Cooled
0.00855
0.00837
Sine wave Cathode Side Cooled
0.02108
0.02091
½ wave (180°)
0.00832
0.02086
0.00813
0.02068
d.c.
0.00800
0.02000
Conduction Angle
Square wave
Sine wave
Form Factors
6 phase (60°) 3 phase (120°)
2.449
1.732
2.778
1.879
½ wave (180°)
1.414
1.57
d.c.
1
Provisional Data Sheet. Types W9830TJ120 to W9830TJ150 Issue A1
Page 3 of 9
February, 2013



No Preview Available !

Rectifier Diode Types W9830TJ120 to W9830TJ150
5.2 Calculating VF using ABCD Coefficients
The on-state characteristic IF vs. VF, on page 6 is represented in two ways;
(i) the well established VT0 and rT tangent used for rating purposes and
(ii) a set of constants A, B, C, D, forming the coefficients of the representative equation for VF in
terms of IF given below:
VF = A + B ln(I F )+ C I F + D I F
The constants, derived by curve fitting software, are given below for both hot and cold characteristics.
The resulting values for VF agree with the true device characteristic over a current range, which is limited
to that plotted.
25°C Coefficients
A 0.798634
B 2.802491 x 10-4
C 4.077433 x 10-6
D 4.359019 x10 -3
190°C Coefficients
A 0.266920
B 5.121623 x 10-2
C 1.713520 x 10-5
D 1.404316 x 10-3
Provisional Data Sheet. Types W9830TJ120 to W9830TJ150 Issue A1
Page 4 of 9
February, 2013




W9830TJ150 datasheet pdf
Download PDF
W9830TJ150 pdf
View PDF for Mobile


Similiar Datasheets : W9830TJ120 W9830TJ150

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact