V048A015T090 Datasheet PDF - Vicor Corporation


Vicor Corporation

Part Number V048A015T090
Description (V048x015T090) Voltage Transformation Module
Page 16 Pages

V048A015T090 datasheet pdf
Download PDF for PC
V048A015T090 pdf
View PDF for Mobile

No Preview Available !

V•I ChipTM – VTM
Voltage Transformation Module
K indicates BGA configuration. For other
mounting options see Part Numbering below.
• 48 V to 1.5 V V•I Chip Converter
• 90 A (135 A for 1 ms)
• High density – 360 A/in3
• 125°C operation
• 1 µs transient response
• >3.5 million hours MTBF
Vf = 26 - 55 V
VOUT = 0.8 - 1.7 V
IOUT = 90 A
K = 1/32
ROUT = 1.2 mmax
• Small footprint – 84 A/in2
• Typical efficiency 93% at 1.5 V/50 A
• Low weight – 0.5 oz (14 g)
• No output filtering required
• Pick & Place / SMD
• BGA or J-Lead packages
Actual size
Product Description
Absolute Maximum Ratings
The V048K015T090 VI Chip Voltage Transformation
Module (VTM) breaks records for speed, density and
efficiency to meet the demands of advanced DSP,
FPGA, ASIC, processor cores and microprocessor
applications at the point of load (POL) while providing
+In to -In
+In to -In
-1.0 to 60.0
100 Vdc For 100 ms
isolation from input to output. It achieves a response
PC to -In
-0.3 to 7.0
time of less than 1 µs and delivers up to 90 A in a
TM to -In
-0.3 to 7.0
volume of less than 0.25 in3 while providing low output
voltages with unprecedented efficiency. It may be
paralleled to deliver hundreds of amps at an output
voltage settable from 0.8 to 1.7 Vdc.
P R E L I M I N A RYThe VTM V048K015T090’s nominal output voltage is
1.5 Vdc from a 48 Vdc input factorized bus, Vf, and is
controllable from 0.8 to 1.7 Vdc at no load, and from
0.8 to 1.6 Vdc at full load, over a Vf input range of 26
to 55 Vdc. It can be operated either open- or closed-loop
depending on the output regulation needs of the
application. Operating open-loop, the output voltage
tracks its Vf input voltage with a transformation ratio,
K = 1/32, and an output resistance, ROUT = 1.0 milliohm, to
enable applications requiring a programmable low
output voltage at high current and high efficiency.
VC to -In
-0.3 to 19.0
+Out to -Out
-0.1 to 4.0
Isolation voltage
Operating junction temperature
-40 to 125
Vdc Input to Output
°C See Note
Output current
90 A Continuous
Peak output current
Case temperature during reflow
A For 1 ms
Storage temperature
-40 to 150
Output power
Peak output power
145 W Continuous
217 W For 1 ms
Note: The referenced junction is defined as the semiconductor having the highest temperature.
This temperature is monitored by the temperature monitor (TM) signal and by a shutdown comparator.
Closing the loop back to an input Pre-Regulation
Module (PRM) or DC-DC converter can compensate
for ROUT.
Part Numbering
The 1.5 V VTM achieves break-through current density
of 360 A/in3 in a VI Chip package compatible with
standard pick-and-place and surface mount assembly
processes. The VI Chip BGA package supports in-board
mounting with a low profile of 0.16" (4 mm) over the
board. A J-lead package option supports on-board
surface mounting with a profile of only 0.25" (6 mm)
over the board. The VTM’s fast dynamic response and
low noise eliminate the need for bulk capacitance at the
load, substantially increasing the POL density while
improving reliability and decreasing cost.
V 048
Input Voltage
Configuration Options
A = On-board, elevated (Fig.16)
F = On-board (Fig.15)
K = In-board (Fig.14)
015 T 090
Output Voltage
(=VOUT x10)
Output Current
Product Grade Temperatures (°C)
Grade Storage Operating
T -40 to150 -40 to125
Vicor Corporation
Tel: 800-735-6200
V•I Chip Voltage Transformation Module V048K015T090 Rev. 1.0
Page 1 of 16

V048A015T090 datasheet pdf
Download PDF for PC
V048A015T090 pdf
View PDF for Mobile

Related : Start with V048A015T09 Part Numbers by
V048A015T090 (V048x015T090) Voltage Transformation Module V048A015T090
Vicor Corporation
V048A015T090 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   NEW   

Since 2010   ::   HOME   ::   Contact