TMP95C061 Datasheet PDF - Toshiba


www.Datasheet-PDF.com

TMP95C061
Toshiba

Part Number TMP95C061
Description CMOS 16-Bit Microcontroller
Page 30 Pages

TMP95C061 datasheet pdf
View PDF for PC
TMP95C061 pdf
View PDF for Mobile


No Preview Available !

TOSHIBA
TLCS-900 Series
TMP95C061
CMOS 16-bit Microcontrollers
TMP95C061F
1. Outline and Device Characteristics
TMP95C061F is a high-speed advanced 16-bit microcontrol-
ler developed for controlling medium to large-scale equipment.
The TMP95C061F is housed in an 100-pin flat package.
Device characteristics are as follows:
(1) Original 16-bit CPU
• TLCS-90/900 instruction mnemonic upward compatible.
• 16M-byte linear address space
• General-purpose registers and register bank system
• 16-bit multiplication/division and bit transfer/arithmetic
instructions
• High-speed DMA
- 4 channels (640ns/2 bytes at 25MHz)
(2) Minimum instruction execution time
- 160ns at 25MHz
(3) Internal RAM: None
Internal ROM: None
(4) External memory expansion
• Can be expanded up to 16M bytes (for both programs and
data)
• AM8/16 pin (select external data bus width)
• Can mix 8- and 16-bit external data bus width.
Dynamic data bus sizing
(5) DRAM Controller
(6) 8-bit timer: 2 channels
(7) 16-bit timer: 2 channels
(8) Pattern generators: 4 bits, 2 channels
(9) Serial interface: 2 channels
(10) 10-bit A/D converter: 4 channels
(11) Watchdog timer
(12) Chip select/wait controller: 4 blocks
(13) Interrupt functions
• 2 CPU interrupts… …SWI instruction and Illegal instruction
• 18 internal interrupts 7-level priority can be set.
• 6 external interrupts
(14) I/O ports: 56 pins
(15) Standby function : 3 HALT modes (RUN, IDLE, STOP)
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
TOSHIBA CORPORATION
1



No Preview Available !

TMP95C061
Figure 1. TMP95C061 Block Diagram
2 TOSHIBA CORPORATION



No Preview Available !

2. Pin Assignment and Functions
The assignment of input/output pins for TMP95C061, their
name and outline functions are described below.
TMP95C061
2.1 Pin Assignment
Figure 2.1 shows pin assignment of TMP95C061.
Figure 2.1. Pin Assignment (100-pin QFP)
TOSHIBA CORPORATION
3



No Preview Available !

TMP95C061
2.2 Pin Names and Functions
The names of input/output pins and their functions are
described below.
Table 2.2. Pin Names and Functions
4 TOSHIBA CORPORATION




TMP95C061 datasheet pdf
Download PDF
TMP95C061 pdf
View PDF for Mobile


Similiar Datasheets : TMP95C001 TMP95C001F TMP95C061 TMP95C061B TMP95C061BDFG TMP95C061BF TMP95C061BFG TMP95C061F TMP95C063 TMP95C063F

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact