TMP91C815F Datasheet PDF - Toshiba


www.Datasheet-PDF.com

TMP91C815F
Toshiba

Part Number TMP91C815F
Description 16-Bit Microcontroller
Page 30 Pages

TMP91C815F datasheet pdf
View PDF for PC
TMP91C815F pdf
View PDF for Mobile


No Preview Available !

Data Book
16bit Micro controller
TLCS-900/L1 series
TMP91C815F
REV4.2 September 7, 2001
Rev. 4.2 05/September/2001



No Preview Available !

Table of Contents
TLCS-900/L1 Devices
TMP91C815F
1. OUTLINE AND DEVICE CHARACTERISTICS
2. PIN ASSIGNMENT AND PIN FUNCTIONS
2.1 Pin Assignment Diagram
2.2 Pin Names and Functions
3. OPERATION
3.1 CPU
3.1.1 Reset
3.2 Memory Map
3.3 Triple clock, Stand-by function, Noise reduction
3.4 Interrupts
3.5 Functions of Ports
3.5.1 Port 1
3.5.2 Port 2
3.5.3 Port 5
3.5.4 Port 6
3.5.5 Port 7
3.5.6 Port 8
3.5.7 Port 9
3.5.8 Port A
3.5.9 Port B
3.5.10 Port C
3.5.11 Port D
3.6 Chip Select / Wait Controller
3.7 8-bit Timers(TMRA)
3.8 MMU
3.9 Serial Channel
3.10Serial Bus Interface
3.11Analog / Digital Converter
3.12Watch Dog Timer
3.13RTC
3.14LCD Controller
3.15Melody / Alarm Generator
4. ELECTRICAL CHARACTERISTICS
5. TABLE OF SFR
6. POINTS AND RESTRICTIONS
7. PACKAGES
contents
91C815-1
91C815-4
91C815-4
91C815-6
91C815-9
91C815-9
91C815-9
91C815-11
91C815-12
91C815-36
91C815-51
91C815-55
91C815-56
91C815-58
91C815-61
91C815-62
91C815-68
91C815-69
91C815-70
91C815-71
91C815-74
91C815-77
91C815-79
91C815-89
91C815-109
91C815-120
91C815-152
91C815-181
91C815-191
91C815-197
91C815-211
91C815-229
91C815-235
91C815-248
91C815-272
91C815-274



No Preview Available !

Data Book modification history
REV/DATE
Rev40/25-July-2001
Rev41/21-August-2001
Rev42/07-September-2001
Rev42/07-September-2001
page
13,16
23,24
154
155
122
17
225,6
131
17
4
7,8
12
55
62
64
65
156
160
166
115
14
247
242
Modification item
Add to description of DFM operation
SBI: BIT2,3 Flocked ! Clocked
SBI: modify the explanation of BIT6
SIO: SC0MOD0 ! SC1MOD0
CLK: bit0 Fc ! fs
MLD: Add to “TA3OUT” in figure
SIO: last ! stop in table
All modify of LCDC pages
CLK: EMCCR3 BIT :
PIN: delete part of P74, P75
Modify pin name “HRESET, MLDALM”
CLK: modify figure
PORT1: AD ! D8 toD15
Modify PORT70’s figure
PORT72: delete mistake pin “HRESET”
Delete mistake pin “SALEH”
SBI: Bit6 Transmitter, Receiver
Modify description
Add to the figure
Add to the figure
CPU: modify the figure
Murata factory URL added
SIO electric charcterestic mistake
Reason



No Preview Available !

TMP91C815
CMOS 16-Bit Microcontrollers
TMP91C815F
1. OUTLINE AND FEATURES
TMP91C815F is a high-speed 16-bit microcontroller designed for the control of various mid- to large-scale
equipment.
TMP91C815F comes in a 128-pin flat package.
Listed below are the features.
(1) High-speed 16-bit CPU (900/L1 CPU)
Instruction mnemonics are upward-compatible with TLCS-90
16 Mbytes of linear address space
General-purpose registers and register banks
16-bit multiplication and division instructions; bit transfer and arithmetic instructions
Micro DMA: 4 channels (1.0 µs/2 bytes at 16 MHz)
(2) Minimum instruction execution time: 148 ns (at 27 MHz)
(3) Built-in RAM: 8 Kbytes
Built-in ROM: None
(4) External memory expansion
Expandable up to 136M bytes (shared program/data area)
Can simultaneously support 8-/16-bit width external data bus (Dynamic data bus sizing)
Separate bus system
(5) 8-bit timers: 4 channels
(6) General-purpose serial interface: 2 channels
UART/Synchronous mode: 2 channels
IrDA Ver.1.0 (115.2kbps) mode selectable: 1 channel
(7) Serial bus interface: 1 channel
I2C bus mode/clock synchronous mode selectable
980508TBA1
For a discussion of how the reliability of microcontrollers can be predicted, please refer to Section 1.3 of the chapter entitled Quality and
Reliability Assurance / Handling Precautions.
TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can
malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when
utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product
could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used
within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions
set forth in the TOSHIBA Semiconductor Reliability Handbook.
The products described in this document are subject to foreign exchange and foreign trade laws.
The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA
CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is
granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others.
The information contained herein is subject to change without notice.
Purchase of TOSHIBA I2C components conveys a license under the Philips I2C Patent Rights to use these components in an
I2C system, provided that the system conforms to the I2C Standard Specification as defined by Philips.
91C815-1




TMP91C815F datasheet pdf
Download PDF
TMP91C815F pdf
View PDF for Mobile


Similiar Datasheets : TMP91C815 TMP91C815F

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact