SR04 Datasheet PDF - Elec Freaks

www.Datasheet-PDF.com

SR04
Elec Freaks

Part Number SR04
Description Ultrasonic Ranging Module HC
Page 3 Pages


SR04 datasheet pdf
Download PDF
SR04 pdf
View PDF for Mobile

No Preview Available !

Tech Support: services@elecfreaks.com
Ultrasonic Ranging Module HC - SR04
Product features:
Ultrasonic ranging module HC - SR04 provides 2cm - 400cm non-contact
measurement function, the ranging accuracy can reach to 3mm. The modules
includes ultrasonic transmitters, receiver and control circuit. The basic principle
of work:
(1) Using IO trigger for at least 10us high level signal,
(2) The Module automatically sends eight 40 kHz and detect whether there is a
pulse signal back.
(3) IF the signal back, through high level , time of high output IO duration is
the time from sending ultrasonic to returning.
Test distance = (high level time×velocity of sound (340M/S) / 2,
Wire connecting direct as following:
5V Supply
Trigger Pulse Input
Echo Pulse Output
0V Ground
Electric Parameter
Working Voltage
Working Current
Working Frequency
Max Range
Min Range
MeasuringAngle
Trigger Input Signal
Echo Output Signal
Dimension
DC 5 V
15mA
40Hz
4m
2cm
15 degree
10uS TTL pulse
Input TTL lever signal and the range in
proportion
45*20*15mm



No Preview Available !

Vcc Trig Echo GND
Timing diagram
The Timing diagram is shown below. You only need to supply a short 10uS
pulse to the trigger input to start the ranging, and then the module will send out
an 8 cycle burst of ultrasound at 40 kHz and raise its echo. The Echo is a
distance object that is pulse width and the range in proportion .You can
calculate the range through the time interval between sending trigger signal and
receiving echo signal. Formula: uS / 58 = centimeters or uS / 148 =inch; or: the
range = high level time * velocity (340M/S) / 2; we suggest to use over 60ms
measurement cycle, in order to prevent trigger signal to the echo signal.



No Preview Available !

Attention:
The module is not suggested to connect directly to electric, if connected
electric, the GND terminal should be connected the module first, otherwise,
it will affect the normal work of the module.
When tested objects, the range of area is not less than 0.5 square meters
and the plane requests as smooth as possible, otherwise ,it will affect the
results of measuring.
www.Elecfreaks.com



SR04 datasheet pdf
Download PDF
SR04 pdf
View PDF for Mobile


Related : Start with SR0 Part Numbers by
SR002 Schottky Barrier Rectifier SR002
Taiwan Semiconductor
SR002 pdf
SR003 Schottky Barrier Rectifier SR003
Taiwan Semiconductor
SR003 pdf
SR004 Schottky Barrier Rectifier SR004
Taiwan Semiconductor
SR004 pdf
SR005 Schottky Barrier Rectifier SR005
Taiwan Semiconductor
SR005 pdf
SR006 Schottky Barrier Rectifier SR006
Taiwan Semiconductor
SR006 pdf
SR009 Schottky Barrier Rectifier SR009
Taiwan Semiconductor
SR009 pdf
SR010 Schottky Barrier Rectifier SR010
Taiwan Semiconductor
SR010 pdf
SR036 Inductorless / Dual Output Off-Line Regulators SR036
Supertex Inc
SR036 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact