SM05B-PASS-1-* Datasheet PDF - JST

www.Datasheet-PDF.com

SM05B-PASS-1-*
JST

Part Number SM05B-PASS-1-*
Description CONNECTOR
Page 15 Pages


SM05B-PASS-1-* datasheet pdf
View PDF for PC
SM05B-PASS-1-* pdf
View PDF for Mobile


No Preview Available !

2.0mm
(.079") pitch
PA FAMILY SERIES/PA•PAF•PAL CONNECTOR
Wire-to-board (Crimp style/IDC) / Wire-to-wire (Crimp style/IDC)
Features ––––––––––––––––––––––––
• Secure locking device
The housing has a locking device to prevent accidental
disconnection because of routing of wires or of vibration, and
also reverse and different circuit numbers mating.
• Interchangeable between crimp and IDC socket
Both crimp and IDC sockets use the same headers and wire-to-
wire mating halves.
• Secondary retainers
Secondary retainers enhance safety in case of partial insertion
or accidental release of the contact.
• Harness variation
PAL, wire-to-wire crimp style connector, increases wire harness variation.
Based upon wire-to-board crimp style PA
connectors, the PA series family of
connector have been expanded to meet the
requirement of complex wire harness of
2.0mm (.079") pitch connectors with secure
locking mechanism thanks to the
additional line up of wire-to-board IDC style
PAF connectors and wire-to-wire crimp
style PAL connectors.
Retainer
PAF Receptacle
(IDC style)
PA Shorouded header
(Top entry type)
Retainer
Retainer
PA Receptacle
(Crimp style Standard type)
PA Receptacle
(Crimp style Retainer mountable type)
PAF Receptacle
(IDC style)
PAL
(Crimp style Wire-to-wire)
PA Shorouded header
(Side entry type)
PA Shorouded header
(Top entry type)
Retainer
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812
PA connector
(Standard type, Retainer mountable type)
• Highly reliable contact
The box contact supplies stable contact performance even under
conditions of vibration, distortion, low voltage or low current.
• Insertion guide mechanism
Header has housing insertion guides for easy and secure insertion.
• Flanged press pin
Top entry type header has flanged press pins, preventing
accidental removal of the pins that might result from the
distorted unmating especially in the case of small No. of circuits.
PAF connector
• The industry’s first secure lock IDC connectors
By separating ID section and secure lock section, the industrys first
secure lock specification has been achieved for IDC that was said
to be impossible. Our fully automatic IDC machines, BCD-M5BP
(for simple harness) and CAM-M12B, SAD-M12E (for multi-
harness), can be applied for harness making.
• Metallic strain relief
Metallic strain relief on the contact securely grips wire insulation that
can avoid direct stress of vibration or impact. The same grip strength
as insulation barrel of crimp style contact could be achieved.
• Retainer with four locking points
The new four locking points design ensures wire retention force
of every direction that is almost superior to contact retention
force of crimp style connectors. It also completely covers
exposed terminated ID contact.
PAL connector
• The industry’s first wire to wire 2.0mm (.079")
pitch retainer mountable type connector.
• Either with or without panel lock can be
selected according to application.
61
www.DataSheet.in



No Preview Available !

PA FAMILY SERIES /PAPAFPAL CONNECTOR
List of combinations ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Crimp style
Standard type
Contact
SPHD-001T-P0.5
SPHD-002T-P0.5
Housing
PAP-( )V-S
Shrouded header
Top entry type
Side entry type
Shrouded header
High box type
Crimp style
Retainer mountable type
Contact
SPA-001T-P0.5
Housing
PARP-( )V
Retainer
PMS-( )V-S
Shrouded header
SMT type
Top entry type
Side entry type
Insulation displacement type
Receptacle
( )PAF-6S
Retainer
PAFS-( )V-S
Contact
Wire to wire Connectors
Receptacle housing
Retainer
Specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
PA Connector (Standard type)
PAF Connector
Current rating: 3A AC, DC (AWG#22)
Voltage rating: 250V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
Contact resistance: Initial value/10m max.
After environmental testing/20m max.
Insulation resistance: 1,000M min.
Withstanding voltage: 800V AC/minute
Applicable wire: AWG #28 to #22
Applicable PC board thickness: 1.6mm(.063")
PA Connector (Retainer mountable type)
Current rating: 1.0A AC, DC (AWG#26)
Voltage rating: 100V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
Contact resistance: Initial value/15m max.
After environmental testing/25m max.
Insulation resistance: 1,000M min.
Withstanding voltage: 800V AC/minute
Applicable wire: UL1061(Contact JST for details regarding other UL wires.)
AWG #26
Conductor/7 strands, tin-coated annealed copper
Insulation O.D./0.9 to 1.0mm(.035" to .039")
Current rating: 3A AC, DC (AWG#22)
Voltage rating: 100V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
Contact resistance: Initial value/15m max.
After environmental testing/25m max.
Insulation resistance: 1,000M min.
Withstanding voltage: 800V AC/minute
Applicable wire: AWG #28 to #22
62
PAL Connector
Current rating: 3A AC, DC (AWG#22)
Voltage rating: 100V AC, DC
Temperature range: -25˚C to +85˚C
(including temperature rise in applying electrical current)
Contact resistance: Initial value/15m max.
After environmental testing/25m max.
Insulation resistance: 1,000M min.
Withstanding voltage: 800V AC/minute
Applicable wire: AWG #28 to #22
Applicable panel thickness : 0.5 to 2.0mm(.020" to .079")
www.DataSheet.in



No Preview Available !

PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Contact –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
6.5(.256)
2.85(.112)
1.3(.051)
Model No.
SPHD-001T-P0.5
SPHD-002T-P0.5
mm2
0.13 to 0.33
0.08 to 0.21
Applicable wire
AWG # Insulation O.D. mm(in.)
26 to 22 1.0 to 1.5(.039 to .059)
28 to 24 0.9 to 1.5(.035 to .059)
Q'ty /
reel
8,000
Material and Finish
Phosphor bronze, tin-plated
Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
(2 to 9 circuits)
B
A [2.0(.079)]
2.0(.079)
5.8(.228)
4.6(.181)
(10 to 15 circuits)
B
A
Circuit No.1
[2.0(.079)]
2.0(.079)
5.8(.228)
4.6(.181)
(16 circuits)
B
A
Circuit No.1
[2.0(.079)]
2.0(.079)
5.8(.228)
4.6(.181)
Circuit No.1
Circuits
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Model No.
PAP-02V-S
PAP-03V-S
PAP-04V-S
PAP-05V-S
PAP-06V-S
PAP-07V-S
PAP-08V-S
PAP-09V-S
PAP-10V-S
PAP-11V-S
PAP-12V-S
PAP-13V-S
PAP-14V-S
PAP-15V-S
PAP-16V-S
Dimensions mm(in.)
AB
2.0( .079)
6.0( .236)
4.0( .157)
8.0( .315)
6.0( .236) 10.0( .394)
8.0( .315) 12.0( .472)
10.0( .394) 14.0( .551)
12.0( .472) 16.0( .630)
14.0( .551) 18.0( .709)
16.0( .630) 20.0( .787)
18.0( .709) 22.0( .866)
20.0( .787) 24.0( .945)
22.0( .866) 26.0(1.024)
24.0( .945) 28.0(1.102)
26.0(1.024) 30.0(1.181)
28.0(1.102) 32.0(1.260)
30.0(1.181) 34.0(1.339)
Material
Nylon 66, UL94V-0, natural (white)
Q'ty /
bag
5,000
5,000
5,000
5,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. PAP-02V-S-
S…natural (white)
K…black R…red E…blue M…green O…orange N…brown
P…purple PK…pink Y…yellow L…lemon yellow FY…vivid yellow
LE…light blue H…gray TR…tomato red
www.DataSheet.in
63



No Preview Available !

PA FAMILY SERIES /PA CONNECTOR (Crimp style Standard type)
Through-hole type shrouded header –––––––––––––––––––––––––––––––––––––––––
Top entry type
(2 to 9 circuits)
Circuit No.1
5.3(.209)
(.020)
0.8(.031)dia.
1.5(.059)
(.079)
(10 to 15 circuits)
1.7(.067)
Circuit No.1
5.3(.209)
0.5(.020)
0.8(.031)dia.
1.5(.059)
(.079)
1.7(.067)
Circuits
2 (Note1)
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Model No.
Without a boss
With a boss
B02B-PAFYK-A B02B-PAFYK-1A
B02B-PASK
B02B-PASK-1
B03B-PASK
B03B-PASK-1
B04B-PASK
B04B-PASK-1
B05B-PASK
B05B-PASK-1
B06B-PASK
B06B-PASK-1
B07B-PASK
B07B-PASK-1
B08B-PASK
B08B-PASK-1
B09B-PASK
B09B-PASK-1
B10B-PASK
B10B-PASK-1
B11B-PASK
B11B-PASK-1
B12B-PASK
B12B-PASK-1
B13B-PASK
B13B-PASK-1
B14B-PASK
B14B-PASK-1
B15B-PASK
B15B-PASK-1
B16B-PASK
B16B-PASK-1
Dimensions mm(in.)
AB
Q'ty /
box
2.0( .079) 6.0( .236) 1,000
2.0( .079) 6.0( .236) 1,000
4.0( .157) 8.0( .315) 1,000
6.0( .236) 10.0( .394) 1,000
8.0( .315) 12.0( .472) 500
10.0( .394) 14.0( .551) 500
12.0( .472) 16.0( .630) 500
14.0( .551) 18.0( .709) 500
16.0( .630) 20.0( .787) 500
18.0( .709) 22.0( .866) 500
20.0( .787) 24.0( .945) 250
22.0( .866) 26.0(1.024) 250
24.0( .945) 28.0(1.102) 250
26.0(1.024) 30.0(1.181) 250
28.0(1.102) 32.0(1.260) 250
30.0(1.181) 34.0(1.339) 250
Material and Finish
Post: Copper alloy, copper-undercoated, tin/lead-plated
Wafer: Glass-filled PBT, UL94V-0, natural (white)
(Note1) Nylon 66, UL94V-0, vivid yellow
<For reference> As the color identification,
the following alphabet shall be put in the underlined part.
For availability, delivery and minimum order quantity, contact JST.
ex. B02B-PASK-
S…natural (white)
K…black R…red E…blue M…green O…orange N…brown
P…purple PK…pink Y…yellow L…lemon yellow FY…vivid yellow
LE…light blue H…gray TR…tomato red
(16 circuits)
Circuit No.1
5.3(.209)
0.5(.020)
0.8(.031)dia.
1.5(.059)
(.079)
1.7(.067)
64
www.DataSheet.in



SM05B-PASS-1-* datasheet pdf
Download PDF
SM05B-PASS-1-* pdf
View PDF for Mobile


Related : Start with SM05B-PASS-1- Part Numbers by
SM05B-PASS-1-* CONNECTOR SM05B-PASS-1-*
JST
SM05B-PASS-1-* pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact