NL8060BH18-02 Datasheet PDF - NEC


www.Datasheet-PDF.com

NL8060BH18-02
NEC

Part Number NL8060BH18-02
Description TFT COLOR LCD MODULE
Page 30 Pages

NL8060BH18-02 datasheet pdf
View PDF for PC
NL8060BH18-02 pdf
View PDF for Mobile


No Preview Available !

TFT COLOR LCD MODULE
NL8060BH18-02
18cm (7.2 Type)
SVGA, 3D
PRELIMINARY DATA SHEET
DOD-PP-1222(5th edition)
This PRELIMINARY DATA SHEET is updated
document from DOD-PP-1183(4).
All information is subject to change without notice.
Please confirm the sales representative before
starting to design your system.
Document Number: DOD-PP-1222 (5th edition)
Published date: May 2011 CP(N)
1 © NEC LCD Technologies, Ltd.
2009-2011 All rights reserved.



No Preview Available !

NL8060BH18-02
INTRODUCTION
The Copyright to this document belongs to NEC LCD Technologies, Ltd. (hereinafter called
"NEC"). No part of this document will be used, reproduced or copied without prior written consent
of NEC.
NEC does and will not assume any liability for infringement of patents, copyrights or other
intellectual property rights of any third party arising out of or in connection with application of the
products described herein except for that directly attributable to mechanisms and workmanship
thereof. No license, express or implied, is granted under any patent, copyright or other intellectual
property right of NEC.
Some electronic parts/components would fail or malfunction at a certain rate. In spite of every
effort to enhance reliability of products by NEC, the possibility of failures and malfunction might
not be avoided entirely. To prevent the risks of damage to death, human bodily injury or other
property arising out thereof or in connection therewith, each customer is required to take sufficient
measures in its safety designs and plans including, but not limited to, redundant system,
fire-containment and anti-failure.
The products are classified into three quality grades: "Standard", "Special", and "Specific" of
the highest grade of a quality assurance program at the choice of a customer. Each quality grade is
designed for applications described below. Any customer who intends to use a product for
application other than that of Standard quality grade is required to contact an NEC sales
representative in advance.
The Standard quality grade applies to the products developed, designed and manufactured in
accordance with the NEC standard quality assurance program, which are designed for such
application as any failure or malfunction of the products (sets) or parts/components incorporated
therein a customer uses are, directly or indirectly, free of any damage to death, human bodily injury
or other property, like general electronic devices.
Examples: Computers, office automation equipment, communications equipment, test and
measurement equipment, audio and visual equipment, home electronic appliances,
machine tools, personal electronic equipment, industrial robots, etc.
The Special quality grade applies to the products developed, designed and manufactured in
accordance with an NEC quality assurance program stricter than the standard one, which are
designed for such application as any failure or malfunction of the products (sets) or
parts/components incorporated therein a customer uses might directly cause any damage to death,
human bodily injury or other property, or such application under more severe condition than that
defined in the Standard quality grade without such direct damage.
Examples: Control systems for transportation equipment (automobiles, trains, ships, etc.), traffic
control systems, anti-disaster systems, anti-crime systems, medical equipment not
specifically designed for life support, safety equipment, etc.
The Specific quality grade applies to the products developed, designed and manufactured in
accordance with the standards or quality assurance program designated by a customer who requires
an extremely higher level of reliability and quality for such products.
Examples: Military systems, aircraft control equipment, aerospace equipment, nuclear reactor
control systems, medical equipment/devices/systems for life support, etc.
The quality grade of this product is the "Standard" unless otherwise specified in this document.
PRELIMINARY DATA SHEET DOD-PP-1222 (5th edition)
2



No Preview Available !

NL8060BH18-02
CONTENTS
INTRODUCTION ............................................................................................................................................2
1. OUTLINE......................................................................................................................................................4
1.1 STRUCTURE AND PRINCIPLE.............................................................................................................4
1.2 APPLICATION.........................................................................................................................................4
1.3 FEATURES...............................................................................................................................................4
2. GENERAL SPECIFICATIONS ..................................................................................................................5
3. BLOCK DIAGRAM .....................................................................................................................................6
4. DETAILED SPECIFICATIONS .................................................................................................................8
4.1 MECHANICAL SPECIFICATIONS........................................................................................................8
4.2 ABSOLUTE MAXIMUM RATINGS ......................................................................................................8
4.3 ELECTRICAL CHARACTERISTICS.....................................................................................................9
4.3.1 LCD panel signal processing board ................................................................................................... 9
4.3.2 Backlight lamp................................................................................................................................. 10
4.3.3 Power supply voltage ripple............................................................................................................. 10
4.3.4 Fuse.................................................................................................................................................. 10
4.4 POWER SUPPLY VOLTAGE SEQUENCE .......................................................................................... 11
4.4.1 LCD panel signal processing board ................................................................................................. 11
4.4.2 Backlight lighting circuit ................................................................................................................. 11
4.5 CONNECTIONS AND FUNCTIONS FOR INTERFACE PINS...........................................................12
4.5.1 LCD panel signal processing board ................................................................................................. 12
4.5.2 Backlight lamp................................................................................................................................. 13
4.5.3 Positions of plug and socket ............................................................................................................ 13
4.5.4 Connection between receiver and transmitter for LVDS ................................................................. 14
4.5.5 Input data mapping .......................................................................................................................... 17
4.6 DISPLAY COLORS AND INPUT DATA SIGNALS ............................................................................18
4.6.1 Combinations between input data signals, FRC signal and MSL signal.......................................... 18
4.6.2 16,777,216 colors............................................................................................................................. 19
4.6.3 262,144 colors.................................................................................................................................. 20
4.7 DISPLAY POSITIONS...........................................................................................................................21
4.8 SCANNING DIRECTIONS ...................................................................................................................22
4.9 INPUT SIGNAL TIMINGS....................................................................................................................23
4.9.1 Outline of input signal timings ........................................................................................................ 23
4.9.2 Timing characteristics ...................................................................................................................... 24
4.9.3 Input signal timing chart .................................................................................................................. 25
4.10 OPTICS.................................................................................................................................................26
4.10.1 Optical characteristics....................................................................................................................26
4.10.2 Definition of contrast ratio.............................................................................................................27
4.10.3 Definition of response times ..........................................................................................................27
4.10.4 Definition of viewing angles..........................................................................................................27
5. ESTIMATED LUMINANCE LIFETIME................................................................................................28
6. RELIABILITY TESTS...............................................................................................................................29
7. PRECAUTIONS .........................................................................................................................................30
7.1 MEANING OF CAUTION SIGNS ........................................................................................................30
7.2 CAUTIONS ............................................................................................................................................30
7.3 ATTENTIONS ........................................................................................................................................30
7.3.1 Handling of the product ...................................................................................................................30
7.3.2 Environment ....................................................................................................................................31
7.3.3 Characteristics..................................................................................................................................31
7.3.4 Other ................................................................................................................................................31
8. OUTLINE DRAWINGS .............................................................................................................................32
8.1 FRONT VIEW ........................................................................................................................................32
8.2 REAR VIEW ..........................................................................................................................................33
REVISION HISTORY ...................................................................................................................................34
PRELIMINARY DATA SHEET DOD-PP-1222 (5th edition)
3



No Preview Available !

NL8060BH18-02
1. OUTLINE
1.1 STRUCTURE AND PRINCIPLE
Color LCD module NL8060BH18-02 is composed of the amorphous silicon thin film transistor
liquid crystal display (a-Si TFT LCD) panel structure with driver LSIs for driving the TFT (Thin
Film Transistor) array and a backlight.
The a-Si TFT LCD panel structure is injected liquid crystal material into a narrow gap between
the TFT array glass substrate and a color-filter glass substrate.
Color (Red, Green, Blue) data signals from a host system (e.g. signal generator, etc.) are
modulated into best form for active matrix system by a signal processing circuit, and sent to the
driver LSIs which drive the individual TFT arrays.
The TFT array as an electro-optical switch regulates the amount of transmitted light from the
backlight assembly, when it is controlled by data signals. Color images are created by regulating
the amount of transmitted light through the TFT array of red, green and blue dots.
Each pixel of this LCD module has two sets of sub-pixels, one is for a right eye and the other for
a left eye. When the data for both a right and a left eye are distributed to those sub-pixels, the
image is perceived as 3D. If the same data are distributed, the image appears to be 2D. Therefore,
to achieve 3D image, the horizontal video data is doubled compared with the conventional LCDs.
1.2 APPLICATION
For industrial use
1.3 FEATURES
The simultaneous 2D/3D displayability
LVDS interface (1port)
LED backlight type
Replaceable lamp holder for backlight
PRELIMINARY DATA SHEET DOD-PP-1222 (5th edition)
4




NL8060BH18-02 datasheet pdf
Download PDF
NL8060BH18-02 pdf
View PDF for Mobile


Similiar Datasheets : NL8060BH18-02

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact