NCV33074 Datasheet PDF - ON Semiconductor


www.Datasheet-PDF.com

NCV33074
ON Semiconductor

Part Number NCV33074
Description Single Supply 3.0 V to 44 V Operational Amplifiers
Page 26 Pages

NCV33074 datasheet pdf
View PDF for PC
NCV33074 pdf
View PDF for Mobile


No Preview Available !

MC34071,2,4,A
MC33071,2,4,A,
NCV33072,4,A
Single Supply 3.0 V to 44 V
Operational Amplifiers
Quality bipolar fabrication with innovative design concepts are
employed for the MC33071/72/74, MC34071/72/74, NCV33072/74A
series of monolithic operational amplifiers. This series of operational
amplifiers offer 4.5 MHz of gain bandwidth product, 13 V/ms slew rate
and fast settling time without the use of JFET device technology.
Although this series can be operated from split supplies, it is
particularly suited for single supply operation, since the common
mode input voltage range includes ground potential (VEE). With a
Darlington input stage, this series exhibits high input resistance, low
input offset voltage and high gain. The all NPN output stage,
characterized by no deadband crossover distortion and large output
voltage swing, provides high capacitance drive capability, excellent
phase and gain margins, low open loop high frequency output
impedance and symmetrical source/sink AC frequency response.
The MC33071/72/74, MC34071/72/74, NCV33072/74,A series of
devices are available in standard or prime performance (A Suffix)
grades and are specified over the commercial, industrial/vehicular or
military temperature ranges. The complete series of single, dual and
quad operational amplifiers are available in plastic DIP, SOIC, QFN
and TSSOP surface mount packages.
Features
Wide Bandwidth: 4.5 MHz
High Slew Rate: 13 V/ms
Fast Settling Time: 1.1 ms to 0.1%
Wide Single Supply Operation: 3.0 V to 44 V
Wide Input Common Mode Voltage Range: Includes Ground (VEE)
Low Input Offset Voltage: 3.0 mV Maximum (A Suffix)
Large Output Voltage Swing: −14.7 V to +14 V (with ±15 V
Supplies)
Large Capacitance Drive Capability: 0 pF to 10,000 pF
Low Total Harmonic Distortion: 0.02%
Excellent Phase Margin: 60°
Excellent Gain Margin: 12 dB
Output Short Circuit Protection
ESD Diodes/Clamps Provide Input Protection for Dual and Quad
NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
8
1
8
1
PDIP−8
P SUFFIX
CASE 626
SOIC−8
D SUFFIX
CASE 751
WQFN10
MT SUFFIX
CASE 510AJ
14
1
14
1
PDIP−14
P SUFFIX
CASE 646
SOIC−14
D SUFFIX
CASE 751A
14
1
TSSOP−14
DTB SUFFIX
CASE 948G
ORDERING INFORMATION
See detailed ordering and shipping information on page 18 of
this data sheet.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 21 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
July, 2014 − Rev. 22
1
Publication Order Number:
MC34071/D



No Preview Available !

MC34071,2,4,A MC33071,2,4,A, NCV33072,4,A
CASE 626/CASE 751
Offset Null 1
8 NC
Inputs
2
3
VEE 4
-
+
7 VCC
6 Output
5 Offset Null
(Single, Top View)
Output 1 1
2-
Inputs 1 +
3
VEE 4
8 VCC
7 Output 2
-6
+
Inputs 2
5
(Dual, Top View)
PIN CONNECTIONS
CASE 646/CASE 751A/CASE 948G
Output 1 1
2
Inputs 1
-1
+
3
VCC 4
Inputs 2
5
6
+
-
2
Output 2 7
14 Output 4
4
13
-
+
12
Inputs 4
11 VEE
3 + 10
-9
Inputs 3
8 Output 3
(Quad, Top View)
CASE 510AJ
Output 1
NC
In ­ 1
In + 1
1
2
3
­
4
VCC
10
5
9 Output 2
8 NC
7 In ­ 2
6 In + 2
VEE/GND
(Top View)
Q1
Q2
-
Inputs
+
Bias
Q3
Q8
Q4
R1 C1
R2
Q9 Q10
Base
Current
Cancellation
Q13
Q12
D1
R3 R4
Q5 Q6 Q7
VCC
Q11
Q14
Q17
D2
C2
Q18
R6 R7
Output
R8
D3
Q19
Q15 Q16
Current
R5 Limit
Offset Null
(MC33071, MC34071 only)
Figure 1. Representative Schematic Diagram
(Each Amplifier)
VEE/GND
http://onsemi.com
2



No Preview Available !

MC34071,2,4,A MC33071,2,4,A, NCV33072,4,A
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Supply Voltage (from VEE to VCC)
VS +44
V
Input Differential Voltage Range
VIDR
(Note 1)
V
Input Voltage Range
VIR (Note 1)
V
Output Short Circuit Duration (Note 2)
tSC Indefinite Sec
Operating Junction Temperature
TJ +150 °C
Storage Temperature Range
Tstg −60 to +150
°C
ESD Capability, Dual and Quad (Note 3)
Human Body Model
Machine Model
ESDHBM
ESDMM
2000
200
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Either or both input voltages should not exceed the magnitude of VCC or VEE.
2. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded (see Figure 2).
3. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (JEDEC standard: JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (JEDEC standard: JESD22−A115)
http://onsemi.com
3



No Preview Available !

MC34071,2,4,A MC33071,2,4,A, NCV33072,4,A
ELECTRICAL CHARACTERISTICS (VCC = +15 V, VEE = −15 V, RL = connected to ground, unless otherwise noted. See Note 4 for
TA = Tlow to Thigh)
A Suffix
Non−Suffix
Characteristics
Symbol Min Typ Max Min Typ Max Unit
Input Offset Voltage (RS = 100 W, VCM = 0 V, VO = 0 V)
VCC = +15 V, VEE = −15 V, TA = +25°C
VCC = +5.0 V, VEE = 0 V, TA = +25°C
VCC = +15 V, VEE = −15 V, TA = Tlow to Thigh
VIO
0.5 3.0
0.5 3.0
− 5.0
mV
1.0 5.0
1.5 5.0
− 7.0
Average Temperature Coefficient of Input Offset
Voltage
RS = 10 W, VCM = 0 V, VO = 0 V,
TA = Tlow to Thigh
DVIO/DT
10
− 10 − mV/°C
Input Bias Current (VCM = 0 V, VO = 0 V)
TA = +25°C
TA = Tlow to Thigh
IIB nA
− 100 500 − 100 500
− − 700 − − 700
Input Offset Current (VCM = 0 V, VO = 0V)
TA = +25°C
TA = Tlow to Thigh
IIO nA
− 6.0 50 − 6.0 75
− − 300 − − 300
Input Common Mode Voltage Range
TA = +25°C
TA = Tlow to Thigh
Large Signal Voltage Gain (VO = ±10 V, RL = 2.0 kW)
TA = +25°C
TA = Tlow to Thigh
Output Voltage Swing (VID = ±1.0 V)
VCC = +5.0 V, VEE = 0 V, RL = 2.0 kW, TA = +25°C
VCC = +15 V, VEE = −15 V, RL = 10 kW, TA = +25°C
VCC = +15 V, VEE = −15 V, RL = 2.0 kW,
TA = Tlow to Thigh
VICR
AVOL
VOH
VEE to (VCC −1.8)
VEE to (VCC −2.2)
50 100
25 −
3.7 4.0
13.6 14
13.4 −
VEE to (VCC −1.8)
VEE to (VCC −2.2)
25 100
20 −
3.7 4.0
13.6 14
13.4 −
V
V/mV
V
VCC = +5.0 V, VEE = 0 V, RL = 2.0 kW, TA = +25°C
VCC = +15 V, VEE = −15 V, RL = 10 kW, TA = +25°C
VCC = +15 V, VEE = −15 V, RL = 2.0 kW,
TA = Tlow to Thigh
VOL
0.1
−14.7
0.3
−14.3
−13.5
0.1
−14.7
0.3
−14.3
−13.5
V
Output Short Circuit Current (VID = 1.0 V, VO = 0 V,
TA = 25°C)
Source
Sink
ISC mA
10 30 − 10 30 −
20 30 − 20 30 −
Common Mode Rejection
RS 10 kW, VCM = VICR, TA = 25°C
CMR 80 97 − 70 97 − dB
Power Supply Rejection (RS = 100 W)
VCC/VEE = +16.5 V/−16.5 V to +13.5 V/−13.5 V,
TA = 25°C
PSR 80 97 − 70 97 − dB
Power Supply Current (Per Amplifier, No Load)
VCC = +5.0 V, VEE = 0 V, VO = +2.5 V, TA = +25°C
VCC = +15 V, VEE = −15 V, VO = 0 V, TA = +25°C
VCC = +15 V, VEE = −15 V, VO = 0 V,
TA = Tlow to Thigh
ID mA
− 1.6 2.0 − 1.6 2.0
− 1.9 2.5 − 1.9 2.5
− − 2.8 − − 2.8
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Tlow
= −40°C for MC33071,2,4,/A, NCV33074/A Thigh = +85°C for MC33071,2,4,/A, NCV33074/A
= 0°C for MC34071,2,4,/A
= +70°C for MC34071,2,4,/A
= −40°C for MC34072,4/V, NCV33072,4A
= +125°C for MC34072,4/V, NCV33072,4A, NCV34074V
Case 510AJ Tlow/Thigh guaranteed by product characterization.
http://onsemi.com
4




NCV33074 datasheet pdf
Download PDF
NCV33074 pdf
View PDF for Mobile


Similiar Datasheets : NCV33033 NCV33035 NCV33039 NCV33063A NCV33064 NCV33067 NCV33072 NCV33072A NCV33074 NCV33074A NCV33078 NCV33079

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact