MKP2F031001F00xxxx Datasheet PDF - WIMA


www.Datasheet-PDF.com

MKP2F031001F00xxxx
WIMA

Part Number MKP2F031001F00xxxx
Description Metallized Polypropylene Capacitors
Page 8 Pages

MKP2F031001F00xxxx datasheet pdf
View PDF for PC
MKP2F031001F00xxxx pdf
View PDF for Mobile


No Preview Available !

WIMA MKP 2
Metallized Polypropylene (PP)
Capacitors in PCM 5 mm
D
Special Features
˜ High volume/capacitance ratio
˜ Self-healing
˜ Increased pulse duty from
250 VDC rated voltage
˜ Very low dissipation factor
˜ Negative capacitance change
versus temperature
˜ Very low dielectric absorption
˜ According to RoHS 2002/95/EC
Typical Applications
For high frequency applications e.g.
˜ Sample and hold
˜ Timing
˜ Oscillating circuits
˜ High frequency coupling and
decoupling
Construction
Dielectric:
Polypropylene (PP) film
Capacitor electrodes:
Vacuum-deposited
Internal construction:
Plastic film
Vacuum-deposited
electrode
Metal contact layer
(schoopage)
Terminating wire
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Black.
Epoxy resin seal: Red
Electrical Data
Capacitance range:
1000 pF to 0.33 mF (E12-values on request)
Rated voltages:
63 VDC, 100 VDC, 250 VDC, 400 VDC,
630 VDC, 1000 VDC
Capacitance tolerances:
± 20%, ±10%, ±5%
Operating temperature range:
–55+ C to +100+ C
Test specifications:
In accordance with IEC 60384-16
and EN 131 200
Climatic test category:
55/085/56 in accordance with IEC
Insulation resistance at +20+ C:
3 x 104 M¸
(mean value: 1 x 105 M¸)
Measuring voltage:
Ur  =   63 V: Utest =   50 V/1 min.
Ur100 V: Utest = 100 V/1 min.
Test voltage:
1.6 Ur, 2 sec.
Maximum pulse rise time:
Dielectric absorption:
0.05 %
Dissipation factors at +20+ C: tan d
at f C0.1 mF 0.1 mF P C  0.33 mF
   1 kHz 0.5 x 10-3
  10 kHz 0.8 x 10-3
100 kHz 3.0 x 10-3
 0.5 x 10-3
 0.8 x 10-3
Voltage derating:
A voltage derating factor of 1.35 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages
Reliability:
Operational life 300 000 hours
Failure rate 2 fit (0.5 x Ur and 40+ C)
Ca ppaFc/imtaF nce
http://www.DataSheet4U.net/
63 VDC
max. pulse rise time V/msec
100 VDC 250 VDC 400 VDC 630 VDC 1000 VDC
1000  ... 2200
3300  ... 6800
0.01  ... 0.022
0.033 ... 0.068
0.1   ... 0.22 
0.33
100
100
100
100
– –
– –
100 250
100 250
100 250
100 250
300 400
300 400
300 400
300 400
– –
– –
500
500
500
for pulses equal to the rated voltage
Mechanical Tests
Packing
Pull test on pins:
10 N in direction of pins according to
IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in
accordance with IEC 60068-2-29
Available taped and reeled.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
36
This datasheet has been downloaded from http://www.digchip.com at this page



No Preview Available !

WWIIMMAA MFKKPP 42
Continuation
D
General Data
Capacitance W
H
0.01  mF
0.015 „
0.022 „
0.033 „
0.047 „
0.068 „
3     7.5
3     7.5
3     7.5
3     7.5
3.5   8.5
4.5   9.5
0.1   mF
0.15  „
0.22  „
0.33  „
5   10  
5.5 11.5
7.2 13  
8.5 14  
63 VDC/40 VAC*
L PCM**
Part number
7.2 5 MKP2C021001B00_ _ _ _
7.2 5 MKP2C021501B00_ _ _ _
7.2 5 MKP2C022201B00_ _ _ _
7.2 5 MKP2C023301B00_ _ _ _
7.2 5 MKP2C024701C00_ _ _ _
7.2 5 MKP2C026801E00_ _ _ _
7.2 5 MKP2C031001F00_ _ _ _
7.2 5 MKP2C031501H00_ _ _ _
7.2 5 MKP2C032201K00_ _ _ _
7.2 5 MKP2C033301M00_ _ _ _
W H
3     7.5
3     7.5
3     7.5
3     7.5
3.5   8.5
4.5   9.5
5   10  
5.5 11.5
7.2 13  
8.5 14  
100 VDC/63 VAC*
L PCM**
Part number
7.2 5 MKP2D021001B00_ _ _ _
7.2 5 MKP2D021501B00_ _ _ _
7.2 5 MKP2D022201B00_ _ _ _
7.2 5 MKP2D023301B00_ _ _ _
7.2 5 MKP2D024701C00_ _ _ _
7.2 5 MKP2D026801E00_ _ _ _
7.2 5 MKP2D031001F00_ _ _ _
7.2 5 MKP2D031501H00_ _ _ _
7.2 5 MKP2D032201K00_ _ _ _
7.2 5 MKP2D033301M00_ _ _ _
Ca pacitance W
H
250 VDC/160 VAC*
L PCM**
Part number
1000 pF
1500 „
2200 „
3300 „
4700 „
6800 „
0.01  mF
0.015 „
0.022 „
0.033 „
0.047 „
0.068 „
3     7.5 7.2 5 MKP2F021001B00_ _ _ _
3     7.5 7.2 5 MKP2F021501B00_ _ _ _
3     7.5 7.2 5 MKP2F022201B00_ _ _ _
3     7.5 7.2
5 MKP2F023301B00_ _ _ _ http://www.DataSheet4U.net/
3.5   8.5 7.2 5 MKP2F024701C00_ _ _ _
4.5   9.5 7.2 5 MKP2F026801E00_ _ _ _
0.1   mF
0.15  „
0.22  „
0.33  „
5   10   7.2
7.2 13   7.2
7.2 13   7.2
8.5 14   7.2
5 MKP2F031001F00_ _ _ _
5 MKP2F031501K00_ _ _ _
5 MKP2F032201K00_ _ _ _
5 MKP2F033301M00_ _ _ _
* AC voltage: f 400 Hz; 1.4 x Urms + UDC Ur
** PCM = Printed circuit module = pin spacing.
Dims. in mm.
WL
H
d = 0.5 l
6 -2
d
5
PCM
at the pin exit points
(± 0.5)
W H
3     7.5
3     7.5
3     7.5
3     7.5
3     7.5
3     7.5
3.5   8.5
3.5   8.5
4.5   9.5
5.5 11.5
7.2 13  
7.2 13  
400 VDC/200 VAC*
L PCM**
Part number
7.2 5 MKP2G011001B00_ _ _ _
7.2 5 MKP2G011501B00_ _ _ _
7.2 5 MKP2G012201B00_ _ _ _
7.2 5 MKP2G013301B00_ _ _ _
7.2 5 MKP2G014701B00_ _ _ _
7.2 5 MKP2G016801B00_ _ _ _
7.2 5 MKP2G021001C00_ _ _ _
7.2 5 MKP2G021501C00_ _ _ _
7.2 5 MKP2G022201E00_ _ _ _
7.2 5 MKP2G023301H00_ _ _ _
7.2 5 MKP2G024701K00_ _ _ _
7.2 5 MKP2G026801K00_ _ _ _
Part number completion:
Tolerance: 20 % = M
10 % = K
  5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
Rights reserved to amend design data without prior notification.
Continuation page 38
37



No Preview Available !

WWIIMMAA MFKKPP 42
Continuation
D
General Data
Capacitance W
H
1000 pF
1500 „
2200 „
3300 „
4700 „
6800 „
3     7.5
3     7.5
3     7.5
3     7.5
3     7.5
3.5   8.5
0.01  mF
0.015 „
0.022 „
0.033 „
0.047 „
4.5   9.5
5   10  
5.5 11.5
7.2 13  
8.5 14  
630 VDC/250 VAC*
L PCM**
Part number
7.2 5 MKP2J011001B00_ _ _ _
7.2 5 MKP2J011501B00_ _ _ _
7.2 5 MKP2J012201B00_ _ _ _
7.2 5 MKP2J013301B00_ _ _ _
7.2 5 MKP2J014701B00_ _ _ _
7.2 5 MKP2J016801C00_ _ _ _
7.2 5 MKP2J021001E00_ _ _ _
7.2 5 MKP2J021501F00_ _ _ _
7.2 5 MKP2J022201H00_ _ _ _
7.2 5 MKP2J023301K00_ _ _ _
7.2 5 MKP2J024701M00_ _ _ _
* AC voltage: f 400 Hz; 1.4 x Urms + UDC Ur
** PCM = Printed circuit module = pin spacing.
Dims. in mm.
W H
3     7.5
3     7.5
3     7.5
3.5   8.5
4.5   9.5
5   10  
7.2 13  
1000 VDC/250 VAC*
L PCM**
Part number
7.2 5 MKP2O111001B00_ _ _ _
7.2 5 MKP2O111501B00_ _ _ _
7.2 5 MKP2O112201B00_ _ _ _
7.2 5 MKP2O113301C00_ _ _ _
7.2 5 MKP2O114701E00_ _ _ _
7.2 5 MKP2O116801F00_ _ _ _
7.2 5 MKP2O121001K00_ _ _ _
Part number completion:
Tolerance: 20 % = M
10 % = K
  5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 127.
http://www.DataSheet4U.net/
Rights reserved to amend design data without prior notification.
Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide).
Urms
V5
2502
102
5 630 VDC
2
10103 2
5 104 2
2200 pF
4700
1000
pF
pF
5 105 2
5 f 106
Hz
Urms
V5
200
102
5 400 VDC
2
10103 2
5 104 2
Urms
V5
0.01
µF 2200 pF
4700
0.068 µF
1000
pF
pF
5 105 2
5 f 106
Hz
250
2
102
5 1000 VDC
2
10103 2
5 104
2
2200 pF
4700
1000
pF
pF
5 105 2
5 f 106
Hz
38



No Preview Available !

Recommendation for Processing
and Application of
Through-Hole Capacitors
D
Soldering Process
A preheating of through-hole WIMA
capacitors is allowed for temperatures
Tmax P 100 ° C.
In practice a preheating duration of
t P 5 min. has been proven to be best.
Single wave soldering
Soldering bath temperature: T P 260 ° C
Immersion time:
t P 5 sec
Double wave soldering
Soldering bath temperature: T P 260 ° C
Immersion time:
2 x t P 3 sec
Due to different soldering processes and
heat requirements the graphs are to be
regarded as a recommendation only.
Wave soldering
T [°C]
10 s
260
240
see detail-
enlargement
220
200
180
160
140
120
100
80
60
40
20 30 60
90
2s 3s
t
120 150 180 210 240 [sec]
Typical temperature/time graph for double wave soldering
WIMA Quality and Environmental Philosophy
ISO 9001:2008 Certification
WIMA Environmental Policy
RoHS Compliance
ISO 9001:2008 is an international basic
standard of quality assurance systems for
all branches of industry. The approval
according to ISO 9001:2008 of our
factories by the VDE inspectorate certifies
that organisation, equipment and moni-
toring of quality assurance in our factories
correspond to internationally recognized
standards.
WIMA WPCS
The WIMA Process Control System (WPCS)
is a quality surveillance and optimization
system developed by WIMA. WPCS is a
major part of the quality-oriented WIMA
production. Points of application of WPCS
during production process:
incoming material inspection
metallization
film inspection
schoopage
pre-healing
pin attachment
cast resin preparation/
encapsulation
100% final inspection
AQL check
All WIMA capacitors, irrespective of
whether through-hole devices or SMD,
http://www.DataSheet4U.net/
are made of environmentally friendly
materials. Neither during manufacture
nor in the product itself any toxic
substances are used, e.g.
– Lead
– PCB
– CFC
– Hydrocarbon chloride
– Chromium 6+
– PBB/PBDE
– Arsenic
– Cadmium
– Mercury
– etc.
We merely use pure, recyclable materials
for packing our components, such as:
carton
cardboard
adhesive tape made of paper
polystyrene
We almost completely refrain from using
packing materials such as:
foamed polystyrene (Styropor®)
adhesive tapes made of plastic
metal clips
According to the RoHS Directive 2002/95/EC
certain hazardous substances like e.g. lead,
cadmium, mercury must not be used any
longer in electronic equipment as of July 1st,
2006. For the sake of the environment WIMA
has refraind from using such substances since
years already.
Tape for lead-free WIMA capacitors
DIN EN ISO 14001:2009
WIMA’s environmental management has
been established in accordance with the
guidelines of DIN EN ISO 14001:2009 to
optimize the production processes with
regard to energy and resources.
14




MKP2F031001F00xxxx datasheet pdf
Download PDF
MKP2F031001F00xxxx pdf
View PDF for Mobile


Similiar Datasheets : MKP2F031001F00xxxx

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact