MCR106 Datasheet PDF - UTC

www.Datasheet-PDF.com

MCR106
UTC

Part Number MCR106
Description REVERSE BLOCKING TRIODE THYRISTORS
Page 3 Pages


MCR106 datasheet pdf
View PDF for PC
MCR106 pdf
View PDF for Mobile


No Preview Available !

UNISONIC TECHNOLOGIES CO., LTD
MCR106
REVERSE BLOCKING TRIODE
THYRISTORS
SCR
DESCRIPTION
PNPN devices designed for high volume consumer applications
such as temperature, light and speed control; process and remote
control, and warning systems where reliability of operation is
important.
FEATURES
* Glass-passivated surface for reliability and uniformity
* Power rated at economical prices
* Practical level triggering and holding characteristics
* Flat, rugged, thermopad construction for low thermal resistance,
high heat dissipation and durability
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MCR106L-x-T60-K
MCR106G-x-T60-K
MCR106L-x-TF3-T
MCR106G-x-TF3-T
Note: Pin assignment: K: Cathode A: Anode G: Gate
Package
TO-126
TO-220F
Pin Assignment
123
KAG
KAG
Packing
Bulk
Tube
MCR106L-6-TF3-T
(1) Packing Type
(2) Package Type
(3) Peak Voltage
(4) Green Package
(1) T: Tube, K: Bulk
(2) TF3: TO-220F, T60: TO-126
(3) 6: 600V, 8: 800V
(4) L: Lead Free, G: Halogen Free and Lead Free
MARKING
TO-126
TO-220F
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 3
QW-R301-001.E



No Preview Available !

MCR106
SCR
ABSOLUTE MAXIMUM RATINGS (TJ=25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Peak Repetitive Forward and Reverse Blocking MCR106-6
Voltage (Note 1) (TJ=110°C, RGK=1k)
MCR106-8
VDRM, VRRM
400
600
V
V
RMS Forward Current (All conduction Angles)
IT(RMS)
4
A
Average Forward Current (TC=93°C or TA=30°C)
Peak Non-repetitive Surge Current
(1/2 Cycle, 60Hz, TJ=-40 ~ +110°C)
Circuit Fusing Considerations (t=8.3 ms)
IT(AV)
ITSM
I2t
2.55
25
2.6
A
A
A2S
Peak Gate Power
PGM 0.5 W
Average Gate Power
Peak Forward Gate Current
PG(AV)
IGM
0.1
0.2
W
A
Peak Reversed Gate Voltage
Mounting Torque (Note 2)
VRGM
6V
6 In. lb.
Junction Temperature
TJ
+110
°C
Storage Temperature
TSTG
-40 ~ +150
°C
Notes: 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate
voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the
anode. Blocking voltages shall not be tested with a constant current source such that the voltage of the
devices are exceeded.
2. Torque rating applies with use of compression washer (B52200-F006 or equivalent). Mounting torque in
excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink
contact pad are common. For soldering purposes (either terminal connection or device mounting),
soldering temperatures shall not exceed +200°C. For optimum results, an activated flux (oxide removing)
is recommended.
3. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
Junction to Ambient
Junction to Case
PARAMETER
TO-220F
TO-126
TO-220F
TO-126
SYMBOL
θJA
θJC
RATINGS
62.5
75
3.31
3
UNIT
°C/W
°C/W
°C/W
°C/W
ELECTRICAL CHARACTERISTICS (TC=25°C and RGK=1000, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
Peak Forward or Reverse Blocking
Current (VAK=Rated VDRM or VRRM)
IDRM,IRRM
TJ=25°C
TJ=100°C
Forward “On” Voltage (ITM=4A peak)
VTM
Gate Trigger Current (continuous DC)
(Note)
IGT
VAK=7V, RL=100
VAK=7V, RL=100, TC=-40°C
Gate Trigger Voltage (continuous DC)
VGT VAK=7V, RL=100, TC=25°C
Gate Non-Trigger Voltage
VGD VAK=Rated VDRM, RL=100, TJ=110°C 0.2
Holding Current
IH VAK=7V, TC=25°C
Forward Voltage Application Rate
dv/dt TJ=110°C
Note: RGK current is not included in measurement.
TYP
10
MAX
10
200
2
200
500
1
5
UNIT
μA
μA
V
μA
V
V
mA
V/s
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R301-001.E



No Preview Available !

MCR106
TYPICAL CHARACTERISTICS
Maximum Case Temperature
110
106
102 0 α π
98 f=60Hz
94 90°
90
α=30° 60°
86
120°
180°
dc
800 0.40.8 1.21.62.02.4 2.83.23.6 4.0
Average Forward Current, IT (AV) (A)
SCR
Maximum Case Temperature
110
90
0 απ
f=60Hz
70
α=30°
50 α=60°
α=90°
dc
α=180°
300 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Average Forward Current, IT (AV) (A)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R301-001.E



MCR106 datasheet pdf
Download PDF
MCR106 pdf
View PDF for Mobile


Related : Start with MCR10 Part Numbers by
MCR10 (MCR Series) Thick Film Chip Resistors MCR10
Rohm
MCR10 pdf
MCR100 Silicon Controlled Rectifiers(Reverse Blocking Triode Thyristors) MCR100
Motorola
MCR100 pdf
MCR100 0.8A SCR MCR100
Micro Electronics
MCR100 pdf
MCR100 SENSITIVE GATE SILICON CONTROLLED RECTIFIERS REVERSE BLOCKING THYRISTORS MCR100
Unisonic Technologies
MCR100 pdf
MCR100 Sensitive Gate Silicon Controlled Rectifiers MCR100
ON Semiconductor
MCR100 pdf
MCR100 (MCR Series) Thick Film Chip Resistors MCR100
Rohm
MCR100 pdf
MCR100 Thyristor SCR 400V 10A 3-Pin TO-92 Bulk MCR100
New Jersey Semiconductor
MCR100 pdf
MCR100 Thyristor MCR100
BLUE ROCKET ELECTRONICS
MCR100 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact