MB90F867AS Datasheet PDF - Fujitsu Media Devices

www.Datasheet-PDF.com

MB90F867AS
Fujitsu Media Devices

Part Number MB90F867AS
Description 16-bit Proprietary Microcontroller
Page 30 Pages


MB90F867AS datasheet pdf
Download PDF
MB90F867AS pdf
View PDF for Mobile


No Preview Available !

www.DataSheet4U.com
FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-13732-2E
16-bit Proprietary Microcontroller
CMOS
F2MC-16LX MB90860A Series
MB90F867A (S) , MB90867A (S)
s DESCRIPTION
The MB90860A-series is Fujitsu 16-bit general-purpose microcontroller which enhances each kind of timers and
communication macros. With the new 0.35 µm CMOS technology, Fujitsu now offers 128 Kbytes on-chip FLASH-
ROM program memory. An internal voltage booster removes the necessity for a second programming voltage.
The power supply (3 V) is supplied to the internal MCU core from an internal regulator circuit. This creates a
major advantage in terms of EMI and power consumption.
The internal PLL clock frequency multiplier provides an internal 42 ns instruction cycle time from an external
4 MHz clock.
The unit features an 8 channel Output Compare Unit and 8 channel Input Capture Unit with 2 separate 16-bit free
running timers. 4 UARTs constitute additional functionality for communication purposes.
Note : F2MC stands for FUJITSU Flexible Microcontroller, a registered trademark of FUJITSU LIMITED.
s PACKAGES
100-pin Plastic QFP
100-pin Plastic LQFP
(FPT-100P-M06)
(FPT-100P-M05)



No Preview Available !

MB90860A Series
s FEATURES
Clock
• Built-in PLL clock frequency multiplication circuit
• Selection of machine clocks (PLL clocks) is allowed among frequency division by two on oscillation clock, and
multiplication of 1 to 6 times of oscillation clock (for 4 MHz oscillation clock, 4 MHz to 24 MHz).
• Operation by sub-clock (up to 50 kHz : 100 kHz oscillation clock divided by two) is allowed. (devices without
S-suffix only)
• Minimum execution time of instruction : 42 ns (when operating with 4-MHz oscillation clock, and 6-time multi-
plied PLL clock).
16 Mbyte CPU memory space
• 24-bit internal addressing
Instruction system best suited to controller
• Wide choice of data types (bit, byte, word, and long word)
• Wide choice of addressing modes (23 types)
• Enhanced multiply-divide instructions and RETI instructions
• Enhanced high-precision computing with 32-bit accumulator
Instruction system compatible with high-level language (C language) and multitask
• Employing system stack pointer
• Enhanced various pointer indirect instructions
• Barrel shift instructions
Increased processing speed
• 4-byte instruction queue
Powerful interrupt function
• Powerful 8-level, 34-condition interrupt feature
• Up to 16 external interrupts are supported
Automatic data transfer function independent of CPU
• Extended intelligent I/O service function (EI2OS) : up to 16 channels
• DMA : up to 16 channels
Low power consumption (standby) mode
• Sleep mode (a mode that halts CPU operating clock)
• Time-base timer mode (a mode that operates oscillation clock, sub clock, time-base timer and clock timer only)
• Watch mode (a mode that operates sub clock and clock timer only)
• Stop mode (a mode that stops oscillation clock and sub clock)
• CPU blocking operation mode
Process
• CMOS technology
I/O port
• General-purpose input/output port (CMOS output)
- 80 ports (devices without S-suffix)
- 82 ports (devices with S-suffix)
(Continued)
2



No Preview Available !

MB90860A Series
(Continued)
Timer
• Time-base timer, clock timer, watchdog timer : 1 channel
• 8/16-bit PPG timer : 8-bit X 16 channels, or 16-bit X 8 channels
• 16-bit reload timer : 4 channels
• 16- bit input/output timer
- 16-bit free run timer : 2 channel (FRT0 : ICU 0/1/2/3, OCU 0/1/2/3, FRT1 : ICU 4/5/6/7, OCU 4/5/6/7)
- 16- bit input capture: (ICU) : 8 channels
- 16-bit output compare : (OCU) : 8 channels
UART (LIN/SCI) : 4 channels
• Equipped with full-duplex double buffer
• Clock-asynchronous or clock-synchronous serial transmission is available
I2C interface* : 2 channels
• Up to 400 kbit/s transfer rate
DTP/External interrupt : 16 channels, CAN wakeup : 2 channels
• Module for activation of extended intelligent I/O service (EI2OS), DMA, and generation of external interrupt.
Delay interrupt generator module
• Generates interrupt request for task switching.
8/10-bit A/D converter : 24 channels
• Resolution is selectable between 8-bit and 10-bit.
• Activation by external trigger input is allowed.
• Conversion time : 3 µs (at 24-MHz machine clock, including sampling time)
Program patch function
• Address matching detection for 6 address pointers.
Internal voltage regulator
• Supports 3 V MCU core, offering low EMI and low power consumption figures
Programmable input levels
• Automotive/CMOS-Schmitt (initial level is Automotive in Single chip mode)
• TTL level (initial level for External bus mode)
ROM security function
• Protects the content of ROM (MASK ROM device only)
Flash security function
• Protects the content of Flash (Flash device only)
External bus interface
Clock monitor function
* : I2C license :
Purchase of Fujitsu I2C components conveys a license under the Philips I2C Patent Rights to use, these com-
ponents in an I2C system provided that the system conforms to the I2C standard Specification as defined by
Philips.
3



No Preview Available !

MB90860A Series
s PRODUCT LINEUP
Part Number
Parameter
MB90F867A (S) , MB90867A (S)
MB90V340(S)
CPU
F2MC-16LX CPU
System clock
On-chip PLL clock multiplier (×1, ×2, ×3, ×4, ×6, 1/2 when PLL stops)
Minimum instruction execution time : 42 ns (4 MHz osc. PLL × 6)
ROM
Boot-block,Flash memory
128 Kbytes
External
RAM
6 Kbytes
30 Kbytes
Emulator-specific
power supply*1
Yes
Technology
0.35 µm CMOS with on-chip voltage regulator for internal
power supply + Flash memory with
On-chip charge pump for programming voltage
0.35 µm CMOS with
on-chip voltage regulator
for internal power supply
Operating
voltage range
3.5 V to 5.5 V : at normal operating (not using A/D converter)
4.0 V to 5.5 V : at using A/D converter/Flash programming
4.5 V to 5.5 V : at using external bus
5 V ± 10%
Temperature range
40 °C to +105 °C
Package
QFP-100, LQFP-100
PGA-299
4 channels
5 channels
UART
Wide range of baud rate settings using a dedicated reload timer
Special synchronous options for adapting to different synchronous serial protocols
LIN functionality working either as master or slave LIN device
I2C (400 Kbit/s)
2 channel
A/D
Converter
24 input channels
10-bit or 8-bit resolution
Conversion time : Min 3 µs include sample time (per one channel)
16-bit Reload Timer Operation clock frequency : fsys/21, fsys/23, fsys/25 (fsys = Machine clock frequency)
(4 channels)
Supports External Event Count function
16-bit
I/O Timer
(2 channels)
Signals an interrupt when overflowing
Supports Timer Clear when a match with Output Compare (Channel 0, 4)
Operation clock freq. : fsys, fsys/21, fsys/22, fsys/23, fsys/24, fsys/25, fsys/26, fsys/27
(fsys = Machine clock freq.)
I/O Timer 0 (clock input FRCK0) corresponds to ICU 0/1/2/3, OCU 0/1/2/3
I/O Timer 1 (clock input FRCK1) corresponds to ICU 4/5/6/7, OCU 4/5/6/7
16-bit Output
Compare
Signals an interrupt when 16-bit I/O Timer match output compare registers.
(8 channels (16-bit) / A pair of compare registers can be used to generate an output signal.
16 channels (8-bit) )
16-bit Input Capture Rising edge, falling edge or rising & falling edge sensitive
(8 channels)
Signals an interrupt upon external event
(Continued)
4



MB90F867AS datasheet pdf
Download PDF
MB90F867AS pdf
View PDF for Mobile


Related : Start with MB90F867A Part Numbers by
MB90F867A (MB90860A Series) 16-bit Proprietary Microcontroller CMOS MB90F867A
Fujitsu Media Devices
MB90F867A pdf
MB90F867AS 16-bit Proprietary Microcontroller MB90F867AS
Fujitsu Media Devices
MB90F867AS pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact