LTA104A261F Datasheet PDF - Toshiba

www.Datasheet-PDF.com

LTA104A261F
Toshiba

Part Number LTA104A261F
Description LCD Module
Page 9 Pages


LTA104A261F datasheet pdf
Download PDF
LTA104A261F pdf
View PDF for Mobile

No Preview Available !

Toshiba Matsushita Display Technology Co., Ltd
PRODUCT INFORMATION
26cm COLOUR TFT-LCD MODULE
(10.4 TYPE)
LTA104A261F
(a-Si TFT)
All information is subject to change without notice. Please read bottom notes.
FEATURES
(1) 10.4” VGA color display with High Luminance (400cd/m2)
(2) Wide Viewing Angle ( Vertica : 100°, Horizonta : 120° )
(3) Built in Long Life Lamps (Typ. : 50,000 h)
(4) Mechanical compatible with LTM10C210 (10.4" VGA)
(5) RoHS compatible
TENTATIVE
RoHS compatible
MECHANICAL SPECIFICATIONS
Item
Dimensional Outline (typ.)
Number of Pixels
Active Area
Pixel Pitch
Weight (approximately)
Backlight
Specifications
265.0 (W) x 188.8 (H) x 11.4 (D) (typ.) mm
640 (W) x 480 (H) pixels
211.2 (W) x 158.4 (H) mm
0.33 (W) x 0.33 (H)
610g
Sidelight ( 2 CCFLs )
ABSOLUTE MAXIMUM RATINGS
Item
Supply Voltage
(VDD)
(VFL)
FL Driving Frequency
(fFL)
Input Signal Voltage
(VIN)
Operating Temperature
Storage Temperature
Storage Humidity
(Max. wet bulb temperature = 39°C)
Min.
-0.3
0
---
-0.3
0
-20
10
Max.
6.5
2.0
100
VDD+0.3
50
60
90
Unit
V
kV(rms)
kHz
V
°C
°C
%(RH)
ELECTRICAL SPECIFICATION (Ta=25°C) (RECOMMENDED OPERATION CONDITION)
Item
Min.
Typ.
Max.
Unit
Supply Voltage
(VDD)
(VFL)
4.75 5.0
--- 480
5.25 V
--- V(rms)
FL Start Voltage
(VSFL)
1500
---
--- V(rms)
High Level Input Voltage
(VIH)
3.5
---
VDD
V
Low Level Input Voltage
(VIL)
0
--- 1.5 V
Current Consumption
(IDD) *1
---
150
---
mA
(IFL) *2
3.0
---
6.5 mA(rms)
Power Consumption*1 *2
--- 6.5 --- W
*1 : 8 color bars pattern
*2 : Except the efficiency of FL inverter
Remarks
Ta=0°C
IFL =6.0mA(rms)
OPTICAL SPECIFICATION (Ta=25°C)
Item
Min.
Typ.
Max.
Unit
Remarks
Contrast Ratio
(CR)
100 250
---
---
Viewing Angle
(Upper+Lower)
---
100
---
°
(CR 10)
(Left+Right)
---
120
---
°
Response Time
Luminance
Lamp Life Time (MTBF)*3 *4
(TON)
(TOFF)
(L)
--- 15 50 ms
--- 25 50 ms
---
400
---
cd/m2
IFL=6.0mA(rms)
50,000
h
*3 : Conditions ;Ta=25°C, IFL=6.0mA(rms), continuous lighting
*4 : Definitions of failure ; 1) Lcd luminance becomes half of the minimum value. 2) Lamp doesn’t light normally.
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
Toshiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of Toshiba Matsushita Display Technology or others.
*The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita Display
Technology before proceeding with the design of equipment incorporating this product.
(1/9)
2007-09-18 (Ver.0.8R )



No Preview Available !

DIMENSIONAL OUTLINE
TENTATIVE
8.0
LTA104A261F
Unit : mm
Standard tolerance : ±0.5
8.0
27.7
7.0
161.1
163.4 +/-0.4 (Bezel opening)
130 +/-0.3
65.0 (Active area center)
7.0
4-F3.2
158.4(ACTIVE AREA)
3.5 3.0
127.0
130.0 +/-0.3
188.8 +/-0.4
3.0 3.5
(2/9)
2007-09-18 (Ver.0.8R )



No Preview Available !

DIMENSIONAL OUTLINE
VFLL2
VFLH2
CN3
TENTATIVE
LTA104A261F
Unit : mm
Standard tolerance : ±0.5
VFLH1
VFLL1
CN2
3.0 3.0
4.0 4.0
7.7 +/-0.5
38.0
26.0
15.5
12.0
No.31 No.1
CN1
No.2
Note) The different points between LTA104A261F and LTM10C210 are below.
1) The lamp unit of LTM10C210 can not use for LTA104A261F.
2) The depth of LTA104A261F is thinner than LTM10C210.
3) The rear structure is changed.
The Metal rear shield is added and the Plastic frame design is different from LTM10C210.
There are slight differences. (Refer to page.3 rear dimensional outline in detail.)
4) The absolute maximum Supply Voltage (VDD) of LTA104A261F is lower than LTM10C210.
(Refer to page.1 Absolute Maximum ratings.)
(3/9)
2007-09-18 (Ver.0.8R )



No Preview Available !

BLOCK DIAGRAM
CN1
DC/DC
Converter
Panel
Controller
Gray scale
Manipulation
Voltage
Generation
Circuit
SEQUENCE OF POWER SUPPLIES AND SIGNALS
LTA104A261F
Backlight
X-driver IC
CN2
Liquid Crystal Panel
640 x 480 pixels
Backlight
CN3
10% VSFL
10% VFL
VSFL
VFL
(4/9)
2007-09-18 (Ver.0.8R )



LTA104A261F datasheet pdf
Download PDF
LTA104A261F pdf
View PDF for Mobile


Related : Start with LTA104A261 Part Numbers by
LTA104A261F LCD Module LTA104A261F
Toshiba
LTA104A261F pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact