Liquid Crystal Display
1. General Description
LM201W01 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. It has a 20.1 inch diagonally measured
active display area with WSXGA+ resolution (1050 vertical by 1680 horizontal pixel array)
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,
thus, presenting a palette of more than 16,7M(True) colors.
It has been designed to apply the 8Bit 2 port LVDS interface.
It is intended to support displays where high brightness, super wide viewing angle,
high color saturation, and high color are important.
RGB, Dclk, DE
Hsync, Vsync CN1
(LVDS 2 port) (30pin)
Power Circuit Block
Source Driver Circuit
(1680 × 1050 pixels)
Backlight Assembly(6 CCFL)
Active Screen Size
Viewing Angle (CR>10)
Display Operating Mode
20.1 inches(511.133mm) diagonal (Aspect ratio 16:10)
459.4(H) x 296.4 (V) x 22.8(D) mm (Typ.)
0.258mm x 0.258mm
1680 horiz. By 1050 vert. Pixels RGB strip arrangement
8bit, 16,7 M colors
300 cd/m2 (Center 1 point, Typ.)
Viewing Angle Free ( R/L 178(Typ.), U/D 178(Typ) )
Total 38.91 Watt(Typ.) (5.94 Watt@VLCD, 32.97 Watt@300cd/[LAMP=7mA])
2850 g (Typ.)
Transmissive mode, normally black
Hard coating(3H) & Anti-glare (Haze 25%) treatment of the front polarizer
Nov. 29. 2005
4 / 29
Datasheet pdf - http://www.DataSheet4U.co.kr/