LEV200AKNAF Datasheet PDF - TE


www.Datasheet-PDF.com

LEV200AKNAF
TE

Part Number LEV200AKNAF
Description KILOVAC LEV200 Series Contactor
Page 2 Pages

LEV200AKNAF datasheet pdf
View PDF for PC
LEV200AKNAF pdf
View PDF for Mobile


No Preview Available !

KILOVAC High Voltage DC Contactors
KILOVAC LEV200 Series Contactor With 1 Form X
Contacts Rated 500+ Amps, 12-900Vdc
Product Facts
n Designed to be the lowest
cost sealed contactor in the
industry with its current
rating (500+A carry, 2000A
interrupt at 320Vdc)
n Available with bottom or
side mounting — not
position sensitive
n Optional auxiliary contact
for easy monitoring of
power contact position
n Hermetically sealed —
intrinsically safe, operates
in explosive/harsh
environments with no
oxidation or contamination
of coils or contacts,
including long periods of
non-operation
n Typical applications include
battery switching and
backup, DC voltage power
control, circuit protection
and safety
n Versatile coil/power
connections
n Designed and built in
accordance to AIAG QS9000
n RoHS compliant
Coil Data (Valid Over Temperature Range) 4
Nominal Voltage
12Vdc 24Vdc
Pickup Voltage (Will Operate) 9.0Vdc 19.0Vdc
Voltage (Max.)
15Vdc 30Vdc
Dropout Voltage
0.75 -
1.0 -
2.0Vdc 5.0Vdc
Coil Resistance @ 25° (Typ.) 11 ohms 40 ohms
48Vdc
38.0Vdc
60Vdc
2.0 -
7.0Vdc
145 ohms
72Vdc
57.0Vdc
90Vdc
3.0 -
12.0Vdc
357 ohms
Ordering Information
Typical Part Number
LEV200 A 4 N A A
Series:
LEV200 = 500+ Amp, 12-900Vdc Contactor
Contact Form:
A = Normally Open
H = Normally Open with Aux. Contacts. (Option
“H” requires option “A” in Coil Wire Length
and option “N” in Coil Terminal Connector.)
Note: Other auxiliary contact forms available.
Consult factory.
Coil Voltage:
4 = 12Vdc 5 = 24Vdc B = 28Vdc
6 = 48Vdc K = 72Vdc
8 = 96Vdc L = 110Vdc O = 115Vac 9 = 240Vac
Notes: Consult factory for detailed specifications
and availability of coils not listed in
“Coil Data” table above. In coil voltage
codes, 115Vac is designated by the
letter “O” rather than the numeral “0.”
Coil Wire Length:
A = 15.3 in (390 mm)
N = None (Requires option
“A” in next step.)
Coil Terminal Connector:
N = None, stripped wires
(Requires option “A” in previous step.)
A = Studs, #10-32 Threaded (Electrical connection
is made to the tab at the base of the stud.)
Note: Specify option A, stripped wires, for coil voltages
> 96Vdc
For factory-direct application assistance,
dial 800-253-4560, ext. 2055, or
805-220-2055.
7–32
Mounting & Power Terminals:
A = Bottom Mount & Male 10mm x M8 Threaded Terminals
F = Side Mount & Male 10mm x M8 Threaded Terminals
Consult factory regarding other available mountings and
power terminals.
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters
unless otherwise specified.
USA: +1 800 522 6752
Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
Performance Data
Contact Arrangement, Power
Contacts — 1 Form X (SPST-NO-DM)
Rated Operating Voltage
12 - 900 VDC
Continuous (Carry) Current,
Typical — 500 A @ 65°C, 400 mcm
conductors
Consult TE for required conductors for
higher (500+ A) currents
Make/Break Current at Various
Voltages 1 — See graph next page
Break Current at 320VDC 1
2,000 A, 1 cycle 3
Contact Resistance, Typ.
(@200A) — 0.2 mohms
Load Life — See graph next page
Mechanical Life — 1 million cycles
Contact Arrangement, Auxiliary
Contacts — 1 Form A (SPST-NO)
Aux. Contact Current, Max.
2A @ 30VDC / 3A @ 125VAC
Aux. Contact Current, Min.
100mA @ 8V
Aux. Contact Resistance, Max.
0.417 ohms @ 30VDC /
.150 ohms @ 125VAC
Operate Time @ 25°C
Close (includes bounce), Typ. — 25 ms
Bounce (after close only), Max. — 7 ms
Release (includes arcing), Max @
2000A — 12 ms
Dielectric Withstanding Voltage
2,200 Vrms @ sea level (leakage <1mA)
Insulation Resistance @ 500VDC
100 megohms 2
Shock, 11ms 1/2 Sine, Peak,
Operating — 20 G
Vibration, Sine, 80-2000Hz.,
Peak — 20 G
Operating Ambient Temperature
-40°C to +85°C
Weight, Typical — 1.3 lb. (.60 kg)
Notes:
1 Main power contacts
2 50 at end of life
3 Does not meet dielectric & IR after
test, 1700 amp for unit with Aux.
Contacts
4 Contacts will operate with 0.8Vnom
< Vcoil < 1.1Vnom over temperature
range.
Invalid
Combinations/Reason
LEV200H-NA_
No auxiliary function with coil studs
LEV200_ONA_
No coil studs with rectifier circuit
LEV200_9NA_
No coil studs with rectifier circuit
LEV200_O_F
No side mont with rectifier circuit
LEV200_9_F
No side mount with rectifier circuit
For additional support numbers
please visit www.te.com



No Preview Available !

Outline Dimensions
KILOVAC High Voltage DC Contactors
KILOVAC LEV200 Series (Continued)
SIde Mount Enclosure
Note: When stud terminals are
specified for coil connections,
the electrical connection is
made at the tab located at the
base of the stud.
Bottom Mount Enclosure
Estimated Make & Break Power Switching Ratings
100,000
Make and Break Power Switching Region
650A Break Only Above 650A
10,000
1,000
100
10
1
1
10
100
1,000
10,000
Load Current (A)
NOTES:
1) For resistive loads with 300µH maximum inductance. Consult factory for inductive loads.
2) Estimates based on extrapolated data. User is encouraged to confirm performance in application.
3) End of life when dielectric strength between terminals falls below 50 megohms @ 500VDC.
4) The maximum make current is 650A to avoid contact welding.
LEV200 Capacitive Make Test Curves for Pre-Charged Motor Controller
700
650
600
550 80% Minimum
500 Pre Charge
450
400 90% Nominal
350 Pre Charge
300
250
200
150
100
50
0
0.0
0.5
1.0 Time (ms)
1.5
2.0
7
For factory-direct application assistance,
dial 800-253-4560, ext. 2055, or
805-220-2055.
Catalog 5-1773450-5
Revised 3-13
www.te.com
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in millimeters USA: +1 800 522 6752
unless otherwise specified. Asia Pacific: +86 0 400 820 6015
UK: +44 800 267 666
For additional support numbers
please visit www.te.com
7–33




LEV200AKNAF datasheet pdf
Download PDF
LEV200AKNAF pdf
View PDF for Mobile


Similiar Datasheets : LEV200AKNAF

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact