Global LCD Panel Exchange Center
1. General Description
LC215EUE is a Color Active Matrix Liquid Crystal Display with a Light Emitting Diode ( White LED) backlight
system without LED driver. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. It has a 21.46 inch diagonally
measured active display area with WUXGA resolution (1080 vertical by 1920horizontal pixel array)
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,
thus, presenting a palette of more than 16,7M colors with A-FRC (Advanced Frame Rate Control).
It has been designed to apply the 8Bit 2 port LVDS interface.
It is intended to support displays where high brightness, super wide viewing angle,
high color saturation, and high color are important.
RGB Source Driver Circuit
TFT - LCD Panel
Ý Ý(1920 RGB 1080 pixels)
Active Screen Size
Display Operating Mode
Back light Assembly
[ Figure 1 ] Block diagram
21.46 inches(545.22mm) diagonal
495.6(H) x 292.2(V) x 10.2(D) mm (Typ.)
0.2475 mm x 0.2475mm
1920 horiz. By 1080 vert. Pixels RGB stripes arrangement
16,7M colors (6bit + A-FRC)
250 cd/m2 ( Center 1 Point, Typ.)
View Angle Free (R/L 178(Typ.), U/D 178(Typ.))
Total 22.68 Watt (Typ.) (4.38 Watt @VLCD, 18.3 Watt @W/O Driver)
1300 g (typ.)
Transmissive mode, normally black
Hard coating(3H), Anti-Glare treatment of the front polarizer(Haze 10%)
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com