1. General Description
The LC200WXN is a Color Active Matrix Liquid Crystal Display with an integral External Electrode Fluorescent
Lamp (EEFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive display type which is operating in the normally black mode. It has a 19.712 inch diagonally
measured active display area with WXGA resolution (768 vertical by 1366 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arrayed in vertical stripes.
Gray scale or the luminance of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
Therefore, it can present a palette of more than 16.7M(true) colors.
It has been designed to apply the 8-bit 1-port LVDS interface.
It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut,
high color depth and fast response time are important.
+24.0V, GND, VBR-A
Source Driver Circuit
TFT - LCD Panel
× ×(1366 RGB 768 pixels)
Back light Assembly( 8 EEFL)
Active Screen Size
Viewing Angle (CR>10)
19.712 inches(500.686mm) diagonal
× ×472(H) 275(V) 41.0(D) (Typ.)
0.1065 mm x 0.3195 mm
1366 horiz. by 768 vert. Pixels, RGB stripe arrangement
8-bit, 16.7 M colors
400 cd/m2 (Center 1point ,Typ.)
Viewing angle free ( R/L 178(Min.), U/D 178(Min.))
Total 37.58W (Typ.) (Logic=2.58W, Inverter=35W [VBR-A=1.65V] )
Transmissive mode, Normally black
Hard coating(3H), Anti-glare treatment of the front polarizer (Haze 13%)