Liquid Crystal Display
1. General Description
LB201U08 is a Color Active Matrix Liquid Crystal Display with an integral Cold Cathode Fluorescent
Lamp(CCFL) backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive type display operating in the normally black mode. It has a 20.1 inch diagonally measured
active display area with UXGA resolution (1200 vertical by 1600 horizontal pixel array)
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes.
Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot,
thus, presenting a palette of more than 16,7M(True) colors.
It has been designed to apply the 8Bit 2 port LVDS interface.
It is intended to support displays where high brightness, super wide viewing angle,
high color saturation, and high color are important, e.x. medical display &work station display.
RGB, Dclk, DE
Hsync, Vsync CN1
(LVDS 2 port) (30pin)
Power Circuit Block
Source Driver Circuit
(1600 × 1200 pixels)
Backlight Assembly(6 CCFL)
Active Screen Size
Viewing Angle (CR>10)
Display Operating Mode
20.1 inches(510.54mm) diagonal
432.0(H) x 331.5(V) x 25.0(D) mm(Typ.)
0.255mm x 0.255mm
1600 horizontal By 1200 vertical Pixels RGB stripe arrangement
8bit, 16,7 M colors
300 cd/m2 (Center 1 point, Typ.)
Viewing Angle Free ( R/L 178(Typ.), U/D 178(Typ) )
Total 35.38 Watt(Typ.) (5.98 Watt@VLCD, 29.4 Watt@300cd/[LAMP=7mA])
3200 g (Typ.)
Transmissive mode, normally black
Hard coating (3H), Anti-glare treatment of the front polarizer
Jun 09. 2008
4 / 33