JMB393 Datasheet PDF - JMicron


Part Number JMB393
Description Port Multiplier Chip
Page 3 Pages

JMB393 datasheet pdf
View PDF for PC
JMB393 pdf
View PDF for Mobile

No Preview Available !

JMB393 Port Multiplier Chip
1. Overview
JMicron JMB393 is a single chip, 1 to 5-ports Serial ATA II Port Multiplier with RAID function support.
It is designed to provide SATA port expansion, data protection and performance aggregation at various
JMB393 uses JMicron’s production-proven Multi-port Serial ATA PHY technology and
JMicron-proprietary storage processor to provide very high efficient SATA RAID operation. With an easy
configuration scheme, the device can be a pure port multiplier which provides SATA port expansion just like
a SATA Hub, or hard-drive performance booster which provides a high performance device seen by host
controller or hard-drive data protector which automatically backup data to prevent data loss from hard-drive
damage. JMB393 also has advance mode to provide both benefit of performance boost and data protection.
JMB393 is a self-contained storage processor chip which completely frees up the main CPU loading and
the SATA ports comply with eSATA specification, making it suitable for use in both internal system and
external storage applications
2. Compliance, Features
2.1 Compliance
Compliant with Serial ATA II Port
Multiplier Spec. Revision 1.1
Compliant with Serial ATA II PHY
Electrical Spec. Revision 1.0
Compliant with Serial ATA High Speed
Serialized AT Attachment Spec. Revision 2.5
2.2 General
Integrated 6-port SATA II PHY
Integrated PLL for SATA II interface
Total six independent SATA channel
Integrated uP, PROM and SRAM for
firmware programming
Integrated high performance RAID
storage processor
Fabricated in 0.13um CMOS Standard
Logic Process
1.3V core and 3.3V I/O power supply
Available in 64-pin QFN
2.3 SATA
Supports 6-port 3.0Gbps SATA II
Supports SATA II Gen2i and Gen2m
(External SATA Connection, eSATA)
Output swing control and automatic
impedance calibration for SATA II PHY
Supports asynchronous signal recovery
Supports spread spectrum clocking
Supports partial / slumber power saving
Automatically speed negotiation for 3
Gbps or 1.5 Gbps
Supports BIST and loopback mode
Supports staggered spin-up
Supports 48-bit LBA addressing
Supports ATAPI drives
Supports Native Command Queue (NCQ)
Supports Hot-Plug
Supports Asynchronous Notification
Supports PM aware and non-PM aware
Copyright © 2008 JMicron Inc. All rights reserved.
Product Brief
Page 1
Datasheet pdf -

No Preview Available !

2.4 RAID
Fully hardware-accelerated RAID Engine
No driver, BIOS or software required for
RAID operation
No external DRAM or processor required
for RAID operation
Independent of device SATA port
connection sequence
Supports RAID levels: 0 / 1 / 3 / 5 / 10 /
RAID 3 / 5 write-back cache to enhance
SATA In-band application interface
Supports more than 2Tera Bytes RAID
Supports on-line command based bad
sector recovery
Supports on-line Auto-Rebuild
Rebuild speed: 200GB/hour
Rebuild proceed continuously between
power cycling
Supports Hot Spare on RAID
Supports various RAID configuration and
monitoring method
2.5 GPIO
Supports 15 GPIOs
Supports I2C interface
Supports ISA interface
Supports SPI interface
Supports LED indicators
Supports LCD panel
Supports dual external
2.6 Application
RAID Subsystem
NAS Servers
Backup Systems
Disk Clone Systems
Serial ATA Enclosures
Large Capacity & High Performance
Solid State Drive
Very Large Capacity Disk Systems
SATA Ports
Copyright © 2008 JMicron Inc. All rights reserved.
Product Brief
Page 2
Datasheet pdf -

No Preview Available !

3. Functional Description
JMB393 is a highly integrated single chip. It integrates six high-speed Serial I/O’s, six SATA upper
layers, a high-performance RAID engine, a microprocessor, SRAM, PROM, a high efficient data bus and
other control logic into the chip. With proper firmware programming, JMB393 can be used as SATA port
multiplier, RAID or disk clone system. The following paragraph describes each functional block in detail.
3.1 Block Diagram
Figure 3.1 Function View of JMB393
Supporting Document
1 Product Brief
2 Data Sheet
3 Hardware Design Guide
4 Application Schematic
Copyright © 2008 JMicron Inc. All rights reserved.
Product Brief
Contact Information
Tech. Support
Page 3
Datasheet pdf -

JMB393 datasheet pdf
Download PDF
JMB393 pdf
View PDF for Mobile

Similiar Datasheets : JMB310 JMB311 JMB312 JMB313 JMB320 JMB321 JMB322 JMB350 JMB352 JMB352U JMB353 JMB355 JMB356 JMB360 JMB361 JMB362 JMB363 JMB365 JMB366 JMB368 JMB380 JMB380 JMB381 JMB381 JMB385 JMB385 JMB387 JMB387 JMB388 JMB388

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact