GBM-9000F Datasheet PDF - Optoway Technology

www.Datasheet-PDF.com

GBM-9000F
Optoway Technology

Part Number GBM-9000F
Description 5V / 850 nm / 2.125 Gb/s Multi-Mode Gigabit Interface Converter
Page 4 Pages


GBM-9000F datasheet pdf
Download PDF
GBM-9000F pdf
View PDF for Mobile

No Preview Available !

Optoway
wwGwB.DMat-a9S0h0ee0tF4U.com
*******************************************************************************************************************************************************************************
GBM-9000F
5V / 850 nm / 2.125 Gb/s Multi-Mode Gigabit Interface Converter (GBIC)
******************************************************************************************************************************************************************************
FEATURES
DESCRIPTION
l Up to 2.5 Gbps Bi-directional Data Links
l Compliant with 1X / 2X Fibre Channel FC-PI 13.0
l Compliant with Gigabit Interface Converter (GBIC)
Specification Rev. 5.5
l 850 nm VCSEL Laser Transmitter
l Hot Pluggable module with Duplex SC Connector
l Multi-rate Operation for 2.5 / 2.125 / 1.062 / 1.25 Gbps
l Link Distance at 2.125 Gbd
150 m links with 62.5/125 µm MMF Cables
300 m links with 50/125 µm MMF Cables
l Link Distance at 1.026 Gbd
The GBM-9000F series optical transceivers meet the Gigabit
Interface Converter (GBIC) specification Rev. 5.5. It satisfies the
optical interface specifications defined in IEEE 802.3z Drift 5.0
1000 BASE-SX for Gigabit Ethernet and 1x / 2x Fibre Channel
FC-PI 13.0. This module is designed for multi-mode fiber and
operates at a nominal wavelength of 850 nm. The transmitter
section uses a multiple quantum well VCSEL and is a class 1
laser compliant according to International Safety Standard IEC-
60825. The receiver section uses an integrated GaAs detector
preamplifier (IDP) mounted in an optical header and a limiting
300 m links with 62.5/125 µm MMF Cables
post-amplifier IC. A PECL input / output logic interface is used.
550 m links with 50/125 µm MMF Cables
l SCA-2 Host Connector
l Single +5 V Power Supply
l Differential PECL Inputs and Outputs
l TTL RX-LOS Output
l Class 1 Laser International Safety Standard IEC-60825
Compliant
TTL RX-LOS output simplifies interface to external circuitry. A
20-pin SCA-2 host connector is used to connect the converter to
the host system.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies
with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The
APPLICATIONS
l Switch to Switch Interface
l High Speed Interface for File Servers
transceiver must be operated within the specified temperature and
voltage limits. The optical ports of the module shall be terminated
with an optical connector or with a dust plug.
l Data Storage
l Dual Rate 1.06 / 2.125 Gb/s Fibre Channel
ORDER INFORMATION
P/No.
Bit Rate
(Gb/s)
1000
BASE
Distance Wavelength Voltage Connector Temp.
(m) (nm) (V)
(oC)
GBM-9000F
2.125/1.063 SX 150/300* 850
5
SC 0 to 70
GBM-9100F
2.125/1.063 SX 150/300* 850
3.3
SC 0 to 70
* At 2.125Gb/s: 150 m using 62.5 µm MMF optic cable; 300 m using 50 µm MMF optic cable
TX Power RX Sens.
(dBm) (dBm)
-4 to -9.5
-4 to -9.5
-17
-17
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Symbol
Min
Max
Units
Notes
Tstg -40 85 oC
Topr -5 70 oC Air flow 1m/sec
Power Supply Voltage
Vcc -0.5 6
V
Input Voltage
---
-0.5 Vcc
V
Recommended Operating Conditions
Parameter
Power Supply Voltage
Symbol
Vcc
Power Supply Current
ITX + IRX
Operating Temperature
Data Rate
Topr
Fiber Length on 50/125 µm
500MHz-km Fiber
Fiber Length on 62.5/125 µm
200MHz-km Fiber
Min Typ Max
4.75 5 5.25
200 300
0 70
1.0625 / 1.25
2.125 / 2.5
550
300
300
150
Units
V
mA
oC
Gb/s
m
m
Conditions
Reference to GND.
Air flow 1m/sec
@1.0625 Gb/s
@2.125Gb/s
@1.0625 Gb/s
@2.125Gb/s
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2003 V1.0



No Preview Available !

Optoway
www.DataSheet4U.com
GBM-9000F
******************************************************************************************************************************************************************************
Transmitter Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V)
Parameter
Symbol
Min Typ
Optical
Optical Transmit Power
Po -9.5 ---
Output Center Wavelength
λ 830 850
Output Spectrum Width
∆λ
---
Extinction Ratio
Optical Modulation Amplitude
ER
OMA
9
196
(Peatk-to-Peak)
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
tr
tf
RIN
Pout TX_Disable Asserted
Electrical
POFF
Differential Input Voltage
Transmit Fault Load
Transmit Fault Output-Low
Transmit Fault Output-High
TX-Disable Input - Low
TX-Disable Input - High
TX-Disable Assert Time
VIH - VIL
TX-FAULTLOAD
VTX-FAULT-L
VTX-FAULT-H
VTX-DISABLE-L
VTX-DISABLE-H
t_off
0.65
4.7
0.0
Vcc 0.5
0
2.0
TX-Disable Negate Time
t-on
Time to initialize, includes reset of
t-int
TX-FAULT
TX FAULT from fault to assertion
t-fault
TX-Disable time to start reset
t-reset
10
1. Output power is power coupled into a 62.5/125 µm or 50/125 µm MM fiber.
2. Pull-up resistor on host Vcc.
Max
-4
860
0.85
---
150
150
-117
-35
2.0
10
0.5
Vcc + 0.3
0.8
Vcc + 0.3
10
1
300
100
Units
Notes
dBm 1
nm
nm RMS (σ)
dB
µW FC-PI Standard
ps
ps
dB/Hz
dBm
20% to 80% value
20% to 80% value
Vp-p
kΩ
V
V
V
V
µs
ms
ms
µs
µs
2
Receiver Specifications (0oC < Topr < 70oC, 4.75 V < Vcc < 5.25V)
Parameter
Symbol Min Typ
Optical
Sensitivity @ 1.25Gb/s @ BER=10-12
Sens (1X)
---
---
Sensitivity @ 2.125Gb/s @ BER=10-12
Sens (2X)
Maximum Input Power
Signal detect Hysteresis
Pin -3
1.0 ---
Wavelength of Operation
RX-LOS Asserted
RX-LOS Deasserted
820 ---
Pa --- ---
Pd -31 ---
Electrical
Differential Output Voltage
±RX-DAT
0.37
Data Output Rise Time
TrRX-DAT
Data Output Fall Time
TfRX-DAT
Receiver Loss of Light Load
RX-LOSLOAD
4.7
Loss of Signal Output Voltage --- Low
RX-LOSL
0
Loss of Signal Output Voltage --- High
RX-LOSH
2.4
Loss of Signal Assert Time (off to on)
TA,RX-LOS
Loss of Signal Deassert Time (on to off)
TD,RX-LOS
3. Minimum sensitivity and saturation levels at BER=1E-12 for a 27-1 PRBS.
4. Pull-up resistor on host Vcc.
Max
-18
-17
---
860
-17
---
2.0
0.35
0.35
10
0.8
Vcc
100
100
Units
Notes
dBm 3
dBm 3
dBm 3
dB
nm
dBm Transition: low to high
dBm Transition: high to low
Vp-p
ns
ns
kΩ
V
V
µs
µs
4
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2003 V1.0



No Preview Available !

Optoway
www.DataSheet4U.com
GBM-9000F
******************************************************************************************************************************************************************************
PIN ASSIGNMENT
PIN
Signal Name
Sequence
Description
1 RX-LOS
2 RGND
3 RGND
4 MOD-DEF(0)
5 MOD-DEF(1)
6 MOD-DEF(2)
7 TX-DIABLE
8 TGND
9 TGND
10 TX-FAULT
11 RGND
12 -RX-DAT
13 +RX-DAT
14 RGND
15 VCCR
16 VCCT
17 TGND
18 +TX-DAT
19 -TX-DAT
20 TGND
2 Receiver Loss of Signal, logic high, open collector compatible,
4.7K to 10K ohm pull-up to VCCT on host
2 Receiver Ground
2 Receiver Ground
2 TTL Low
2 SCL Serial Clock Signal
2 SDA Serial Data Signal
2 Transmitter Disable, logic high, open collector compatible
2 Transmitter Ground
2 Transmitter Ground
2 Transmitter Fault, logic high, open collector compatible, 4.7K to
10K ohm pull-up to VCCT on GBIC
1 Receiver Ground
1 Receiver Data Bar, Differential PECL, AC coupled
1 Receiver Data, Differential PECL, AC coupled
1 Receiver Ground
2 Receiver +5V Supply
2 Transmitter +5V Supply
1 Transmitter Ground
1 Transmitter Data, Differential PECL, AC coupled
1 Transmitter Data Bar, Differential PECL, AC coupled
1 Transmitter Ground
A sequence value of 1 indicates that the signal is in the first group to engage during plugging of a module. A sequence value of 2
indicates that the signal is the second and last group. The two guide pins on the connector are electrically connected to the transceiver circuit
ground. These two guide pins make contact with circuit prior to sequence 1 signals.
Module Definition
Module Definition
4
MOD-DEF(0)
PIN 4
TTL Low
MOD-DEF (1)
PIN 5
SCL
MOD-DEF (2)
PIN 6
SDA
Interpretation by
Host
Serial module definition
protocol
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector
(NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the
2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2003 V1.0



No Preview Available !

Optoway
www.DataSheet4U.com
GBM-9000F
******************************************************************************************************************************************************************************
PACKAGE DIAGRAM
Units in mm
Note: Specifications subject to change without notice.
******************************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2003 V1.0



GBM-9000F datasheet pdf
Download PDF
GBM-9000F pdf
View PDF for Mobile


Related : Start with GBM-9000 Part Numbers by
GBM-9000F 5V / 850 nm / 2.125 Gb/s Multi-Mode Gigabit Interface Converter GBM-9000F
Optoway Technology
GBM-9000F pdf
GBM-9000FG 5V / 850 nm / 2.125 Gb/s Multi-Mode Gigabit Interface Converter GBM-9000FG
Optoway Technology
GBM-9000FG pdf
GBM-9000G 5V / 850 nm / 2.5 Gb/s Multi-Mode Gigabit Interface Converter GBM-9000G
Optoway Technology
GBM-9000G pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact