Board type PLC ideal for incorporation in equipment
Kit with case
Kit without case
I Power Supply and I/O Specifications
24 V DC note)
24 V DC note)
Relay 2 A/ Transistor 0.8 A (varies with different models)
Note) 12 V DC models are also available in some models.
I Performance Specifications
Item Description (Relay output / Transistor output)
Number of I/O points
20 points / 20 points, 32 points note 1)
Max. 4 boards
Total points; 100/192 points note 1)
RAM (Not included the optional ROM)
2.7k steps / 5k steps note 2)
Internal relay 1,008 points
144 points in total
Data register 1660 words/6144 words note 2)
1) Relay/Transistor output
2) Standard model/model with RS232C port
1. The board size (W184 ҂ H80 mm W7.244
҂ H3.150 inch) offers space savings. *
Since the PLCs of are mounting type, additional
space is not needed for expansion.
* Case type FP-M has 215 mm 8.465 inch width.
2. The models with RS232C and clock/
calendar function are standardized
In anticipation of connection to operation display
panel and linkage with upper grade PLCs, the
model equipped with RS232C port is
standardized. In addition, a clock/calendar
function is equipped for necessity of timer
(Only for the part numbers which end in C.)
3. RAM/ROM-switchable type program
RAM is adopted as internal memory. Optional
ROM is also available for program copy and
4. Terminal array for easy wiring
Power to I/O circuit is supplied from the internal
circuit. No-voltage input is possible at the input
side, and the sensor power supply is also
I Applicable Functions
Pulse catch input
8 points in total
Available by adding expansion A/D and D/A boards
( )High speed counter ch 0: 1 phase 10 kHz / 2 phases 10 kHz
ch 1: 1 phase 2.5 kHz / 2 phases 2 kHz note)
2 points (max. 4.9 kHz)
This is mounted on the model having part
numbers which end in C .
D sub 9-pin connector
Note) ch 1 is available for CPU Ver. 2.D or later.
I Applicable Network Functions
Max. 128-input and 96-output points can be
controlled by adding transmitter master board.
Available as a slave station of MEWNET-F by
adding I/O link board.
I/O link with mating station of FP-M, FP1 or FP3
is possible by adding transmitter master board.
Available by adding a tool port and C-NET
For C type, RS232C port can be used for com-
Available. Model with RS232C port can also
I Other Built-in Functions
Program block-edit during RUN Available (CPU Ver.3.0 or later)
Adjustable input time ﬁltering
Available, from 1 to 128 ms
This is built in the control unit hav-
ing part numbers which end in C.