D1853 Datasheet PDF - Sanyo Semiconductor Corporation

www.Datasheet-PDF.com

D1853
Sanyo Semiconductor Corporation

Part Number D1853
Description 2SD1853
Page 3 Pages


D1853 datasheet pdf
View PDF for PC
D1853 pdf
View PDF for Mobile


No Preview Available !

Ordering number:EN2506
NPN Epitaxial Planar Silicon Darlington Transistor
2SD1853
Driver Applications
Applications
· Motor drivers, hammer drivers, relay drivers.
Features
· High DC current gain.
· Low saturation voltage.
Package Dimensions
unit:mm
2003B
[2SD1853]
5.0
4.0
4.0
www.DataSheet4U.com
0.45
0.5
0.45
123
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Tj
Tstg
1.3 1.3
Conditions
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
ICBO
IEBO
hFE1
hFE2
VCE(sat)
VBE(sat)
V(BR)CBO
V(BR)CEO
VCB=60V, IE=0
VEB=5V, IC=0
VCE=2V, IC=0.5A
VCE=2V, IC=1A
IC=1A, IB=2mA
IC=1A, IB=2mA
IC=1mA, IE=0
IC=25mA, RBE=
0.44
1 : Emitter
2 : Collector
3 : Base
JEDEC : TO-92
EIAJ : SC-43
SANYO : NP
Ratings
80
60
6
1.5
3
0.7
150
–55 to +150
Unit
V
V
V
A
A
W
˚C
˚C
Ratings
min typ
1000
2000
80
60
max
10
2.5
1.5
2.0
Unit
µA
mA
V
V
V
V
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
22599TH (KT)/5217TA, TS No.2506–1/3



No Preview Available !

Electrical Connection
2SD1853
www.DataSheet4U.com
No.2506–2/3



No Preview Available !

2SD1853
www.DataSheet4U.com
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 1999. Specifications and information herein are subject
to change without notice.
PS No.2506–3/3



D1853 datasheet pdf
Download PDF
D1853 pdf
View PDF for Mobile


Related : Start with D185 Part Numbers by
D1850 2SD1850 D1850
Inchange Semiconductor
D1850 pdf
D1851 2SD1851 D1851
Sanyo Semicon Device
D1851 pdf
D1852 2SD1852 D1852
Sanyo
D1852 pdf
D1853 2SD1853 D1853
Sanyo Semiconductor Corporation
D1853 pdf
D1855 2SD1855 D1855
SavantIC
D1855 pdf
D1856 2SD1856 D1856
Rohm
D1856 pdf
D1857 2SD1857 D1857
Unisonic Technologies
D1857 pdf
D1858 2SD1858 D1858
ROHM Electronics
D1858 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact