D1192 Datasheet PDF - Sanyo Semicon Device


www.Datasheet-PDF.com

D1192
Sanyo Semicon Device

Part Number D1192
Description 2SD1192
Page 4 Pages

D1192 datasheet pdf
View PDF for PC
D1192 pdf
View PDF for Mobile


No Preview Available !

Ordering number:926C
PNP/NPN Epitaxial Planar Silicon Darlington Tranasistors
2SB882/2SD1192
Driver Applications
Applications
· Motor drivers, printer hammer drivers, relay drivers,
voltage regulator control.
Features
· High DC current gain.
· High current capacity and wide ASO.
· Low saturation voltage.
Package Dimensions
unit:mm
2010C
[2SB882/2SD1192]
( ) : 2SB882
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Junction Temperature
Storage Temperature
Tj
Tstg
Electrical Characteristics at Ta = 25˚C
Tc=25˚C
Conditions
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Collector-to-Emitter Saturation Voltage
Symbol
Conditions
ICBO
IEBO
hFE
fT
VCE(sat)
VCB=(–)40V, IE=0
VEB=(–)5V, IC=0
VCE=(–)2V, IC=(–)5A
VCE=(–)5V, IC=(–)5A
IC=(–)5A, IB=(–)10mA
Base-to-Emitter Saturation Voltage
VBE(sat) IC=(–)5A, IB=(–)10mA
JEDEC : TO-220AB
EIAJ : SC-46
1 : Base
2 : Collector
3 : Emitter
Ratings
(–)70
(–)60
(–)6
(–)10
(–)15
1.75
40
150
–55 to +150
Unit
V
V
V
A
A
W
W
˚C
˚C
Ratings
min typ
2000
5000
20
0.9
(–)1.0
max
(–)0.1
(–)3.0
(–)1.5
(–)2.0
Unit
mA
mA
MHz
V
V
V
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
91098HA (KT)/10996TS (KOTO) 8-4329/D251MH/4067KI/2045MW, TS No.926–1/4



No Preview Available !

Parameter
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
Turn-ON Time
Storage Time
Fall Time
Switching Time Test Circuit
2SB882/2SD1192
Symbol
Conditions
V(BR)CBO
V(BR)CEO
ton
IC=(–)5mA, IE=0
IC=(–)50mA, RBE=
See specified Test Circuit
tstg See specified Test Circuit
tf See specified Test Circuit
Electrical Connection
Ratings
min typ
(–)70
(–)60
(0.5)
0.6
(1.5)
3.0
(1.7)
1.8
max
Unit
V
V
µs
µs
µs
µs
µs
µs
No.926–2/4



No Preview Available !

2SB882/2SD1192
No.926–3/4



No Preview Available !

2SB882/2SD1192
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any and all SANYO products described or contained herein fall under strategic
products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan, such products must not be exported without obtaining export license from the Ministry of
International Trade and Industry in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 1998. Specifications and information herein are
subject to change without notice.
PS No.926–4/4




D1192 datasheet pdf
Download PDF
D1192 pdf
View PDF for Mobile


Similiar Datasheets : D110277 D110278 D110279 D110280 D1106 D111 D1111 D1113 D1115 D1117 D1118 D111EI D1128 D112EI D1133 D1135 D1136 D1137 D1138 D113EI D1140 D1145 D1148 D114EI D1153 D1156 D1157 D1159 D115EI D1163A

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact