BP5132H Datasheet PDF - BPS


www.Datasheet-PDF.com

BP5132H
BPS

Part Number BP5132H
Description Mains Dimmable Liner LED Driver
Page 7 Pages

BP5132H datasheet pdf
View PDF for PC
BP5132H pdf
View PDF for Mobile


No Preview Available !

Description
BP5132H is a high current precision Linear LED
DriverIt can be used in TRIAC dimmable LED
driver, integrated with High Voltage regulation
switchers and JFET supply, specially designed for
AC line LED strings forwarded with high voltage
and low current.
In application, it supports a quite small BOM
benefit from no ECAP and no Magnetics, compile
with EMI and safety standard.
BP5132H can drive precision constant current by
option of an external resistor, and set up the LED
strings in group linear compile with THD
performance. Typical 40mA LED current is
optimized for 220V line voltage.
BP5132H
Mains Dimmable Liner LED Driver
Features
High integrationall SMTs in small size.
No ECAPs and magnetics
Integrated with 500V HV MOS, saved on
safety components.
Fast startup
LED current set by external resistors with ±5%
accuracy.
On chip thermal regulation.
Compensation for line regulation
In ESOP8 package.
Application
GU10/E27 LED retrofit lamps
LED candle
Other LED lighting
Typical Application
BP5132H
AC
BP5132H_EN_DS_Rev.1.0
Fig.1 BP5132H Typical Application
www.bpsemi.com
Bright Power Semiconductor Co. Confidential Customer Use Only
1



No Preview Available !

BP5132H
Mains Dimmable Liner LED Driver
Order Information
Part
Number
BP5132HB
BP5132HC
Package
ESOP8
ESOP8
Temperature
Thermal
Regulation
Packing Method
Mark
Tape:4000 pcs/reel BP5132H
-40 to105 TREG : 130
XXXXXY
2 reels/box
XYYB
Tape:4000 pcs/reel BP5132H
-40 to105 TREG : 150
XXXXXY
2 reels/box
XYYC
BP5132H-XXXXXY-XYYZ
Package
H:ESOP8
Pin mapping
Lot code
Year
Week
product category code
B:Treg=130
C:Treg=150
GND1
CS1
GND2
CS2
NC
Drain1
NC
Drain2
Pin Descriptions
Fig 2 BP5132H Pin Mapping
Pin No.
1
2
3
4
5
6,8
7
Pin Name
GND1
CS1
GND2
CS2
Drain2
NC
Drain1
Descriptions
IC ground 1
Current sense 1,connect the current sense resistor to GND1
IC ground 2
Current sense 2,connect the current sense resistor to GND2
Drain2 for LED string
Not connect
Drain1 for LED string
BP5132H_EN_DS_Rev.1.0
www.bpsemi.com
Bright Power Semiconductor Co. Confidential Customer Use Only
2



No Preview Available !

BP5132H
Mains Dimmable Liner LED Driver
Absolute Limit (Note1)
Symbol
Parameter
Range
Unit
D 500V HV interface
500 V
ID_MAX
Saturation current @ TJ_max
80 mA
CS Low voltage pins
-0.3~6
V
PDMAX
θJA
TJ
TSTG
Power dissipation (note 2)
Thermal Resistor
Junction Temperature
Storage temperature range
1
60
-40 to 150
-55 to 150
W
/W
ESD (Note 3)
2 kV
Note 1: Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. Under “recommended operating
conditions” the device operation is assured, but some particular parameter may not be achieved. The electrical characteristics table defines the operation
range of the device, the electrical characteristics is assured on DC and AC voltage by test program. For the parameters without minimum and maximum
value in the EC table, the typical value defines the operation range, the accuracy is not guaranteed by spec.
Note 2: The maximum power dissipation decrease if temperature rise, it is decided by TJMAX, θJA, and environment temperature (TA). The maximum power
dissipation is the lower one between PDMAX= (TJMAX-TA)/ θJA and the number listed in the maximum table.
Note 3: Human Body mode, 100pF capacitor discharge on 1.5kΩ resistor
BP5132H_EN_DS_Rev.1.0
www.bpsemi.com
Bright Power Semiconductor Co. Confidential Customer Use Only
3



No Preview Available !

BP5132H
Mains Dimmable Liner LED Driver
Electrical Characteristics (note4, 5) unless specified, otherwise TA =25 ℃)
Symbol
description
Test condition
Min. Typ. Max. UNIT
Operation Current
ICC Operation current
D=30V
180 320
uA
Current Sense
VREF
Ref. for string1 D=30VRcs=120Ω
600
mV
Thermal Regulation
TREG
Thermal
Regulation
BP5132HB
130
TREG
Thermal
Regulation
BP5132HC
150
Note 4: Production testing of the chip is performed at 25°C.Note 5: The maximum and minimum parameters specified are guaranteed by test, the typical
value are guaranteed by design, characterization and statistical analysis
BP5132H_EN_DS_Rev.1.0
www.bpsemi.com
Bright Power Semiconductor Co. Confidential Customer Use Only
4




BP5132H datasheet pdf
Download PDF
BP5132H pdf
View PDF for Mobile


Similiar Datasheets : BP5131D BP5131HC BP5131JC BP5132H BP5136H

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact