B121EW01 Datasheet PDF - AU

www.Datasheet-PDF.com

B121EW01
AU

Part Number B121EW01
Description TFT LCD Module
Page 19 Pages


B121EW01 datasheet pdf
Download PDF
B121EW01 pdf
View PDF for Mobile

No Preview Available !

www.DataSheet4U.com
Version: 2
Total Pages:19
Date: 2003/11/18
Product Functional Specification
12.1 inch Wide XGA Color TFT LCD Module
Model Name: B121EW01 V.0
(‹) Preliminary Specification
( ) Final Specification
Note: This Specification is subject to change without notice.
(C) Copyright AU Optronics
Dec., 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B121EW01 V.0 Ver.02
1/19



No Preview Available !

Contents
1.0 Handling Precautions .........................................................................................................................................4
2.0 General Description...............................................................................................................................................5
2.1 Display Characteristics ..................................................................................................................................................... 5
2.2 Functional Block Diagram................................................................................................................................................ 6
3.0 Absolute Maximum Ratings .................................................................................................................................7
4.0 Optical Characteristics..........................................................................................................................................8
5.0 Signal Interface......................................................................................................................................................9
www.DataSheet4U.co5m.1 Connectors ........................................................................................................................................................................ 9
5.2 Signal Pin.......................................................................................................................................................................... 9
5.3 Signal Description .......................................................................................................................................................... 10
5.4 Signal Electrical Characteristics ..................................................................................................................................... 10
5.5 Signal for Lamp connector ............................................................................................................................................. 11
6.0 Pixel Format Image .............................................................................................................................................12
7.0 Parameter guide line for CCFL Inverter ..........................................................................................................12
8.0 Timing Control………………………………………………………………………………………………….14
8.1 Timing Characteristics.................................................................................................................................................... 14
8.2 Timing Definition ........................................................................................................................................................... 14
9.0 Power Consumption ............................................................................................................................................15
10. Power ON/OFF Sequence ...................................................................................................................................16
11.0 Reliability /Safety Requirement .......................................................................................................................17
12.0 Outline drawing……………………………………………………………………………………………….18
(C) Copyright AU Optronics
Dec., 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B121EW01 V.0 Ver.02
2/19



No Preview Available !

II Record of Revision
Version and Date Page Old description
V1. 2003/07/29
All First Release
V2 2003/11/18
5,8,12 Un-define
,14,15
www.DataSheet4U.com
New Description
NA
Brightness, optical characteristics
Parameter guide line for CCFL
Timing Control ,
Power Consumption
Remark
(C) Copyright AU Optronics
Dec., 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B121EW01 V.0 Ver.02
3/19



No Preview Available !

1.0 Handling Precautions
1) Do not press or scratch the surface harder than a HB pencil lead because the polarizers are very fragile
and could be easily damaged.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water droplets or oil immediately. Long contact with the droplets may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Protect the module from static electricity and insure proper grounding when handling. Static electricity
may cause damage to the CMOS Gate Array IC.
7) Do not disassemble the module.
www.DataSheet4U.com
8) Do not press the reflector sheet at the back of the module.
9) Avoid damaging the TFT module. Do not press the center of the CCFL Reflector when it was taken out
from the packing container. Instead, press at the edge of the CCFL Reflector softly.
10) Do not rotate or tilt the signal interface connector of the TFT module when you insert or remove other
connector into the signal interface connector.
11) Do not twist or bend the TFT module when installation of the TFT module into an enclosure (Notebook
PC Bezel, for example). It should be taken into consideration that no bending/twisting forces are applied
to the TFT module from outside when designing the enclosure. Otherwise the TFT module may be
damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local regulations for
disposal.
13) The LCD module contains a small amount of material that has no flammability grade, so it should be supplied
by power complied with requirements of limited power source (2.11, IEC60950 or UL1950).
14) The CCFL in the LCD module is supplied with Limited Current Circuit (2.4, IEC60950 or UL1950). Do not
connect the CCFL in Hazardous Voltage Circuit.
(C) Copyright AU Optronics
Dec., 2003 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B121EW01 V.0 Ver.02
4/19



B121EW01 datasheet pdf
Download PDF
B121EW01 pdf
View PDF for Mobile


Related : Start with B121EW0 Part Numbers by
B121EW01 TFT LCD Module B121EW01
AU
B121EW01 pdf
B121EW01 TFT-LCD Module B121EW01
AOU
B121EW01 pdf
B121EW01-V0 LCD MODULE B121EW01-V0
AUO
B121EW01-V0 pdf
B121EW01-V2 LCD MODULE B121EW01-V2
AUO
B121EW01-V2 pdf
B121EW01-V3 LCD MODULE B121EW01-V3
AUO
B121EW01-V3 pdf
B121EW01-V5 LCD MODULE B121EW01-V5
AUO
B121EW01-V5 pdf
B121EW01_V0 LCD MODULE B121EW01_V0
AUO
B121EW01_V0 pdf
B121EW01_V2 LCD MODULE B121EW01_V2
AUO
B121EW01_V2 pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact