AW-CM389MA Datasheet PDF - Azure Wave

Azure Wave

Part Number AW-CM389MA
Description IEEE 802.11 2X2 MIMO ac/a/b/g/n Wireless LAN + Bluetooth Combo M.2 1216 Module
Page 12 Pages

AW-CM389MA datasheet pdf
View PDF for PC
AW-CM389MA pdf
View PDF for Mobile

No Preview Available !

IEEE 802.11 2X2 MIMO ac/a/b/g/n Wireless
LAN + Bluetooth Combo M.2 1216 Module
with M.2 2230 Adaptor Board
Version 0.1

No Preview Available !

Revision History
Version 0.1 2016/04/29
Initial Version
Initials Approved
Daniel Lee

No Preview Available !

1. General Description
1-1. Product Overview and Functional Description
AzureWave Technologies, Inc. introduces the advanced IEEE 802.11 a/b/g/n/ac 2x2 MIMO
WLAN and Bluetooth combo module - AW-CM389MA. The module is targeted to mobile and
embedded devices which need small footprint package, low power consumption, and multiple
OS support. The module supports 2.4GHz/5GHz IEEE 802.11a/b/g/n/ac MAC/baseband/radio,
and Bluetooth 4.2 functionality. It also features an integrated Power Management Unit (PMU),
Power Amplifiers (PAs), and a Low Noise Amplifier (LNA) to address the needs of mobile
devices that require minimal power consumption and compact size. By using AW-CM389MA,
the customers can easily enable the Wi-Fi and BT embedded applications with the benefits of
high design flexibility, short development cycle, and quick time-to-market. Specified in the
IEEE 802.11 standard minimize the system power requirements by using AW-CM389MA. In
addition to the support of WPA/WPA2 (personal) and WEP encryption, the AW-CM389MA also
supports the IEEE 802.11i security standard through AES and TKIP acceleration hardware for
faster data encryption. For the video, voice and multimedia applications the AW-CM389MA
support 802.11e Quality of Service (QoS). The host interface is SDIO v3.0 interface.
For Bluetooth operation, the AW-CM389MA is Bluetooth 4.2 compliant. The Bluetooth
transmitter also features a Class 2 power amplifier. The AW-CM389MA supports extended
Synchronous Connections (eSCO), for enhanced voice quality by allowing for retransmission
of dropped packets, and Adaptive Frequency Hopping (AFH) for reducing radio frequency
interference. It also incorporates all Bluetooth 4.1 features including Secure Simple Pairing,
Sniff Substrating, and Encryption Pause and Resume. An independent, SDIO v3.0 is
provided for the Bluetooth host interface. The Bluetooth subsystem presents a standard Host
Controller Interface (HCI) via a SDIO and PCM for audio.

No Preview Available !

1-2. Key Features
1 SDIO3.0 interfaces support for WLAN and Bluetooth
2 Bluetooth 4.2 complaint with Bluetooth 2.1 + Enhanced Data Rate (EDR)
3 Audio Codec interface support
4 Multiple power saving modes for low power consumption
5 IEEE 802.11i for advanced security
6 Quality of Service (QoS) support for multimedia applications
7 Drip-in WLAN Linux drivers are Android ready and validated on Android based
8 Support for Linux kernel versions up to 2.6.32.
9 Support for BlueZ v4.47 Bluetooth profiles stack used in Android É clair
10 Simultaneous AP-STA
11 Support China WAPI
12 Lead-free design

AW-CM389MA datasheet pdf
Download PDF
AW-CM389MA pdf
View PDF for Mobile

Similiar Datasheets : AW-CM389MA

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact