AP117A Datasheet PDF - API Technologies

www.Datasheet-PDF.com

AP117A
API Technologies

Part Number AP117A
Description Rad-Hard Adjustable Positive Linear Voltage Regulator
Page 4 Pages


AP117A datasheet pdf
Download PDF
AP117A pdf
View PDF for Mobile

No Preview Available !

AP117/AP117A
Rad-Hard Adjustable Positive Linear Voltage Regulator
Features
Rad-Hard to 300 krad TID 1
Single Event, latch-up immune (LET= 87 MeV/mg/cm2)
Wide Input/Output Voltage Differential: 40V
K-level screening
Excellent Temperature Stability
The AP117/117A are space qualified, wide-input range positive linear voltage regulators designed for military and space
flight applications. Packaged in a hermetic tabless TO-257 package, the AP117/117A provides up to 1.5A of output
current over the full input voltage range of 2.5V to 40V. The device also features internal thermal shutdown, output
current-limiting circuitry and up to ±1% initial output accuracy. The AP117/117A is an excellent choice for applications
requiring high radiation tolerance, low noise and high power supply rejection ratios.
These voltage regulators are provided in adjustable output voltage configurations only. Consult the factory for fixed
output versions. The adjustable version requires only 2 external resistors to program the output from 1.25V to 37V.
Absolute Maximum Ratings
(Exceeding maximum ratings may damage the device.
Symbol
Vin- Vo
Io
Pd
Rthjc
Tstg
Top
Tj
W
Tsold
Parameter
DC input- Output Differential
Output Current
Power Dissipation Tcase=25oC
Thermal Resistance, Junction to Case
Storage Temperature
Operating Temperature Range
Maximum Junction Temperature
Package weight
Maximum Soldering Temperature, 10sec
Value
40
1.5
50
2.5
-65 to +150
-55 to +125
175
5
265
Unit
V
A
W
oC/W
oC
oC
oC
G
oC
Radiation Ratings
Symbol
TID
ELDRS
SET
SEL/SEB
Parameter
Minimum in Spec Total Dose Performance (Dose Rate: 50-300 rad(Si)/s)
Minimum in Spec Low Dose Rate Performance (Dose Rate ≤ 10 mRad (Si)/s)
Linear Energy Threshold, Single Event Transients < 100mV, (note 5)
Single-Event Latch-up Free linear Energy Transfer Threshold
Value
> 300
> 50
> 15
> 87
Unit
krads (Si)
krads (Si)
MeV/mg/cm2
MeV/mg/cm2
Rev Date: 12/19/2014
Page # 1
© API Technologies Corp. Proprietary Information | www.apitech.com | micro.apitech.com | +1.888.553.7531 | MicrowaveSales@apitech.com



No Preview Available !

AP117/AP117A
Electrical Characteristics
@ Ta= -55oC to +125oC (Unless Otherwise Specified)
Pre-Radiation
Symbol
Parameter
Reference Voltage accuracy
Reference Voltage accuracy (6)
Line Regulation (6) (2)
Load Regulation (7) (2)
Adjust-Pin Current Vload (6)
Adjust-Pin Current Change (6)
Adjust Current Change (7)
Output Current (7)
Minimum I/O Differential (4) (7)
Test Conditions
API117A
API117
Min Typical Max Min Typical Max Units
1.238 1.25 1.262
V
1.225 1.25 1.275 1.200 1.250 1.300 V
+/-0.02
+/-0.02 %/V
+/-1.5
+/- 1.5 %
100 100 μA
-5 5 -5 5 μA
-5 5 -5 5 μA
1.25 1.25
A
3.0 3.0 V
Post-Radiation
(Ta= 25 oC) Notes (1) (3)
Symbol
Parameter
Reference Voltage accuracy
Reference Voltage accuracy
Adjust-pin current
Test Conditions
API117A
API117
Min Typical Max Min Typical Max Units
1.225 1.25 1.270 1.15
1.35 V
1.20 1.25 1.3 1.15
1.35 V
+/-5 +/-5 μA
Notes:
1. At the time of publication of this datasheet, API Technologies/Marlborough did not have a DLA
certified radiation hardness assurance program.
2. Load & Line regulation are measured at constant (Tj) junction temperature using a low duty cycle
pulse. Changes in output voltage due to heating effects must be evaluated separately.
3. TID Radiation Testing is performed per MIL-STD-883, Method 1019.
4. Internal SOA Protection Limits Output Current With High Input Voltage.
5. Vin 9V and COUT 44 uF
6. VDIFF 39V @ 125oC
7. At 125oC, a 1.5A output requires an I/O differential of 6.75 V.
Rev Date: 12/19/2014
Page # 2
© API Technologies Corp. Proprietary Information | www.apitech.com | micro.apitech.com | +1.888.553.7531 | MicrowaveSales@apitech.com



No Preview Available !

Package Outline (Tabless TO-257)
AP117/AP117A
Pin No
1
2
3
Pin Name
ADJ
OUT
IN
Case
Pin Description
Adjust Pin
Output Voltage
Input Voltage
No Connection- Isolated
Ordering Information
AP117A
K
D2 -ADJ
Product Number
117 = 4% Ref. Accuracy
117A = 1% Ref. Accuracy
117B = 2% Ref. Accuracy
Screening Level
K = Class-K Compliant
H = Class-H Compliant
E = Engineering Model
Package Type
D2 = Tabless TO-257
7 = TO-257
Available Output
Voltage Options
-ADJ = Adjustable
Screening Options
Tests
100 % Non-Destruct Wire-Pull
Pre-Cap Visual
Temperature Cycle
Constant Acceleration
PIND
Pre-Burn-In Electrical (Ta= 25C)
Burn-In
Final Electrical
Hermeticity (Fine & Gross Leak)
X-Ray
External Visual
EM
Engineering Models
N/A
N/A
N/A
N/A
N/A
N/A
N/A
100% (25C)
N/A
N/A
Sample
Screening Levels
H
K
Compliant-
MIL-PRF-38534
Sample
N/A
100%
100%
N/A
100%
100% (160 Hours)
100%
100%
N/A
100%
100%
100%
100%
100%
100%
100%
100% (320 Hours)
100%
100%
100%
100%
Mil-Std-883-
Method
2023
2017
1010
2001
2020
1015
1014
2012
2009
Rev Date: 12/19/2014
Page # 3
© API Technologies Corp. Proprietary Information | www.apitech.com | micro.apitech.com | +1.888.553.7531 | MicrowaveSales@apitech.com



No Preview Available !

Figure 1 Output Voltage Configuration
AP117/AP117A
AP117/AP117A
Notes:
1. VOUT = 1.25 (1+ R2/R1)
2. R1 is recommended to be ≤ 125 Ω
Figure 2 Typical Application
AP117/AP117A
Rev Date: 12/19/2014
Page # 4
© API Technologies Corp. Proprietary Information | www.apitech.com | micro.apitech.com | +1.888.553.7531 | MicrowaveSales@apitech.com



AP117A datasheet pdf
Download PDF
AP117A pdf
View PDF for Mobile


Related : Start with AP117 Part Numbers by
AP117 Rad-Hard Adjustable Positive Linear Voltage Regulator AP117
API Technologies
AP117 pdf
AP117A Rad-Hard Adjustable Positive Linear Voltage Regulator AP117A
API Technologies
AP117A pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact