AMEL5-AZ Datasheet PDF - AIMTEC

www.Datasheet-PDF.com

AMEL5-AZ
AIMTEC

Part Number AMEL5-AZ
Description AC-DC / DC-DC Converter
Page 5 Pages


AMEL5-AZ datasheet pdf
Download PDF
AMEL5-AZ pdf
View PDF for Mobile


No Preview Available !

Click on Series name for product info on aimtec.com
Series AMEL5-AZ
5 Watt | AC-DC / DC-DC Converter
FEATURES:
I/O Isolation 3000VAC
Operating Temp: -40 oC to +95 oC
Input: 90-305VAC, 47-440Hz, or 130-430VDC
Over load, Over Voltage, Short Circuit Protection
RoHS compliant
Energy Star compliant
Efficiency up to 76%
Soft start
Models
Single output
Model
Input
Voltage
(VAC/Hz)
Input
Voltage
(VDC)
Temperature
range
(ºC)
Output
Voltage
(V)
Output
Current
max (A)
Maximum
capacitive
Load
(µF)
Efficiency
(%)
115
VAC
230
VAC
277
VAC
AMEL5-3.3SAZ
90-305/47-440 130-430
-40 to +95
3.3
1. 5
2200
71 71 69
AMEL5-5SAZ
90-305/47-440 130-430
-40 to +95
5
1
1100
72 73 72
AMEL5-12SAZ
90-305/47-440 130-430
-40 to +95
12
0.42 680 75 76 76
AMEL5-15SAZ
90-305/47-440 130-430
-40 to +95
15
0.333
330 75 75 73
AMEL5-24SAZ
90-305/47-440 130-430
-40 to +95
24
0.21 220 75 76 75
Note: 1. Optional mounting plate version can be ordered by adding “-ST” suffix to part number (ex. AMEL5-5SAZ-ST);
2. Optional version with incorporated filter for Earth to Ground connection can be ordered by adding “Gto the model suffix (ex.
AMEL5-5SGAZ).
Input Specifications
Parameters
Current (full load)
Inrush current <2ms (cold start)
Leakage current
External fuse
Input dissipation
Start-up time
Conditions
115 VAC
230 VAC
277 VAC
115 VAC
230 VAC
277 VAC
Recommended slow blow type
(110/230/277 VAC)
115 VAC/ Full Load
Typical
1.5
0.2
150
Maximum
120
80
70
15
30
40
0.2
Units
mA
mA
mA
A
A
A
mA
A
W
ms
Output Specifications
Parameters
Conditions
Typical
Maximum
Voltage accuracy
±2
Line regulation
±1
Load regulation
0-100% load
±1
Transient recovery time
200
Transient response deviation
25% load step
±2
3.3/5V models
75
Ripple & Noise*
12/15V models
100
24V models
150
Hold-up time
5
*Ripple and Noise are measured at 20MHz bandwidth by using a 0.1µF (M/C) and 47µF (E/C) parallel capacitor.
Units
%
%
%
µs
% of Vout
mV p-p
mV p-p
mV p-p
ms
Isolation Specifications
Parameters
Tested I/O voltage
Isolation Resistance
Conditions
60 sec
Typical
>1000
Rated
3000
Units
VAC
www.aimtec.com
F 052e R8.Q
Tel: +1 514 620 2722
1 of 5
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only



No Preview Available !

Series AMEL5-AZ
5 Watt | AC-DC / DC-DC Converter
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
66 KHz
Over load protection
Foldback
130
%
Over voltage protection
Zener Diode Clamp
Short circuit protection
Operating temperature
Storage temperature
Maximum case temperature
Temperature coefficient
With derating over 60ºC, see chart
Auto recovery
Refer to model application
-40 to +95
100
0.02
oC
oC
oC
% / oC
Cooling
Free air convection
Humidity
Non condensing
20 ~ 95
% RH
Case material
Plastic (flammability to UL 94V-0)
Weight
30 g
Dimensions (L x W x H)
MTBF
51.50 x 28.30 x 17.80mm (2.03 x 1.11 x 0.70 inches)
> 400,000 hrs (MIL-HDBK -217F, t=+25oC)/Full Load
> 100,000 hrs (MIL-HDBK -217F, t=at highest operating temperature)/Full Load
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at
rated output load unless otherwise specified.
Environment Approval
Test
Parameters
Wave form
Acceleration amplitude
Shock
Bump duration
Converter operation
Number of bumps
Test mode
Vibrations
Displacement
Acceleration
Converter operation
Conditions
Half sine wave
5gn
30ms
Before and after test, body mounted (on chassis)
18 (3 in each direction for every axis)
Sweep sine, 10-100Hz, speed 0.05Hz/s
1mm
3g, 3 loops 30min one cycle, 3h total, every axis tested
Before and after test, body mounted (on chassis)
Safety Specifications
Parameters
Agency approvals
cULus for all models CE, CB (not including suffix “GAZ” models)
Information technology Equipment
IEC\EN\UL 60950-1
Information technology Equipment
EN 60950-1:2006+A11:2009
EMI - Conducted and radiated emission
EN55022, class B
Harmonic Current Emissions
IEC/EN 61000-3-2, Class A
Voltage fluctuations and flicker
IEC/EN 61000-3-3, (EN60555-3)
Standards
Electrostatic Discharge Immunity
RF, Electromagnetic Field Immunity
IEC 61000-4-2 Air level 3, Contact level 2
IEC 61000-4-3 Level 2
Electrical Fast Transient/Burst Immunity
IEC 61000-4-4 Level 2
Surge Immunity
IEC 61000-4-5 Level 2
RF, Conducted Disturbance Immunity
IEC 61000-4-6 Level 2
Power frequency Magnetic Field Immunity
IEC 61000-4-8
Voltage dips, Short Interruptions Immunity
IEC 61000-4-11
www.aimtec.com
F 052e R8.Q
Tel: +1 514 620 2722
2 of 5
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only



No Preview Available !

Additional Surge Protective Circuitry
Series AMEL5-AZ
5 Watt | AC-DC / DC-DC Converter
The AMEL5-AZ series design level surge protection is certified to IEC 61000-4-5 surge Line to Line of 1KV. However greater
protection can be enhanced by adding protective devices to ingress circuitry. For example, by adding an MOV (Metal Oxide
Varistor) device example S14K320E2 to the N / L input lines 2KV surge protection or greater, can be achieved.
L Fuse
MOV
N
+ Vo+
Aimtec
AC-DC
Converter
- Vo-
MOV PN
S14K320E2
Vrms
V
320
Vdc
Wmax (2ms)
Pmax
V JW
420 136 0.6
Pin Out Specifications
Pin Single
1 AC Input (N)
2 AC Input (L)
3 +V Output
4 -V Output
5 No pin
Dimensions
1
1.11 0.80
(28.30) (20.32)
0.11
(2.89)
2
2.03
(51.50)
1.80
(45.72)
TOP VIEW
3
0.40
(10.16)
4
0.40
(10.16)
5
13
TOP VIEW
4
25
17.80
(0.70)
0.2
(5.08)
(Min)
Ø 0.04
(1.00)
5 Ø- 0.047 (Ø 1.2)
DIV: 0.2 (5.08)
Dimensions: inch (mm)
Case Tolerance:± 0.02 (0.50)
Pin Pitch Tolerance: ± 0.012 (0.30)
www.aimtec.com
F 052e R8.Q
Tel: +1 514 620 2722
3 of 5
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only



No Preview Available !

Derating
Free Air Convection
Series AMEL5-AZ
5 Watt | AC-DC / DC-DC Converter
100
80
Safe Operating Area
60
50
40
30
20
60 ºC
0
-40 -25 0 20 40 60
Ambient Temperature º C
8085 95 100
Earth/Ground Connection for AMEL5-xxSGAZ models
L
100-277VAC
N
AMEL5-xxSGAZ
+Vout
-Vout
AMEL5-xxSGAZ models meet the EN55022 class B compliance when connected to Earth/Ground. These models are
incorporating an EMC compliant filter and when connected to Earth/GND, no external filtering will be needed to meet the
specified limits.
Models include: AMEL5-3.3SGAZ, AMEL5-5SGAZ, AMEL5-12SGAZ, AMEL5-15SGAZ, and AMEL5-24SGAZ
www.aimtec.com
F 052e R8.Q
Tel: +1 514 620 2722
4 of 5
Toll free: + 1 888 9 AIMTEC (924 6832)
North America only



AMEL5-AZ datasheet pdf
Download PDF
AMEL5-AZ pdf
View PDF for Mobile


Related : Start with AMEL5-A Part Numbers by
AMEL5-AZ AC-DC / DC-DC Converter AMEL5-AZ
AIMTEC
AMEL5-AZ pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact