AME3-AZ Datasheet PDF - AIMTEC

www.Datasheet-PDF.com

AME3-AZ
AIMTEC

Part Number AME3-AZ
Description AC-DC Converter
Page 3 Pages


AME3-AZ datasheet pdf
Download PDF
AME3-AZ pdf
View PDF for Mobile


No Preview Available !

Click on Series name for product info on aimtec.com
FEATURES:
Series AME3-AZ
3Watt | AC-DC Converter
Models
Single output
Model
AME3-3.3SAZ
AME3-5SAZ
AME3-12SAZ
AME3-15SAZ
AME3-24SAZ
AME3-3.3SBAZ
AME3-5SBAZ
AME3-12SBAZ
AME3-15SBAZ
AME3-24SBAZ
I/O Isolation 3000VAC
Operating Temp: -40oCto +80oC
Over load, Short Circuit Protection
Input: 90-305VAC, 47-440Hz, or 130-430 VDC
Optional 90-528VAC, 47-440Hz, or 130-745 VDC
RoHS compliant
Energy Star compliant
Ultra small package
Input
Voltage
(VAC/Hz)
90-305/47-440
90-305/47-440
90-305/47-440
90-305/47-440
90-305/47-440
90-528/47-440
90-528/47-440
90-528/47-440
90-528/47-440
90-528/47-440
Input
Voltage
(VDC)
130-430
130-430
130-430
130-430
130-430
130-745
130-745
130-745
130-745
130-745
Temperature
range
(ºC)
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
Output
Voltage
(V)
3.3
5
12
15
24
3.3
5
12
15
24
Output
Current max
(mA)
900
600
250
200
125
Maximum
capacitive
Load
(µF)
2200
1100
680
560
470
Efficiency
Full load (%)
115 230 277 480
VAC VAC VAC VAC
63 64 62
67 67 65
75 73 70
78 74 71
81 81 80
700
2200
61 61 60 54
600
1100
67 67 66 60
250 680 72 72 70 61
200 560 72 71 70 61
125 470 71 71 69 62
Input Specifications
Parameters
Current (full load)
Inrush current <2ms (cold start)
Leakage current
External fuse
Input Dissipation (No Load)
Conditions
115 VAC
230 VAC
277 VAC
480VAC
115 VAC
230 VAC
277 VAC
480 VAC
Recommended slow blow type
Typical
1
0.3
Maximum
80
40
35
30
10
15
20
30
0.15
Units
mA
mA
mA
mA
A
A
A
A
mA
A
W
Output Specifications
Parameters
Conditions
Typical
Voltage accuracy
Full load (typical)*
±5
Line regulation
LL-HL, Full Load
±3
Load regulation (single output)
0-100% load (typical)*
±5
Transient Recovery Time
200
Transient Response Deviation
25% load step
±2
Minimum load
0
3.3/5 VDC With 560µF E/C
200
Ripple & Noise
12/15 VDC With 220µF E/C
400
24 VDC With 220µF E/C
500
*Ripple & Noise measured at 20MHz bandwidth with 0.1µF and 115/230/277/480VAC (Typical input ) with Full Load
Isolation Specifications
Parameters
Tested I/O voltage
Isolation Resistance
Conditions
60 sec
Typical
>1000
Maximum
Units
%
%
%
µs
% of Vout
%
mV p-p
mV p-p
mV p-p
Rated
3000
Units
VAC
M
www.aimtec.com
F 052e R8.I
Tel: +1 514 620 2722
1 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only



No Preview Available !

Series AME3-AZ
3Watt | AC-DC Converter
General Specifications
Parameters
Conditions
Typical
Maximum
Units
Switching frequency
100 KHz
Over Load protection
Auto recovery
>125%
Short circuit protection
Auto recovery
Operating temperature
AME3-xxSBAZ derating at 50°C
AME3-xxSAZ derating at 55°C
-40 to +80
oC
Storage temperature
-40 to +85
oC
Maximum Case temperature
100 oC
Humidity
Non condensing
20~95
% RH
Case material
Plastic resin + Fiberglass (flammability to UL 94V-0)
Weight
25 g
Dimensions (L x W x H)
1.40 x 0.92 x 0.76 (35.60 x 23.31 x 19.32mm)
MTBF
> 400 000 hrs (MIL-HDBK -217F, t=+25oC)/Full Load
> 100,000 hrs (MIL-HDBK -217F, t= at highest operating temperature)/Full Load
NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load
unless otherwise specified.
Environment Approval
Parameters
Wave form: Half sine wave
Acceleration amplitude: 5gn
Shock
Bump duration: 30 ms
Conditions
Number of bumps: 18 (3 in each direction for every axis)
Converter operation before and after test, body mounted (on chassis)
Test mode: Sweep sine
10-100Hz, speed 0.05Hz/s
Vibrations
Displacement: 1mm
Acceleration: 3g
3 loops 30min one cycle, 3h total, every axis tested
Converter operation before and after test, body mounted (on chassis)
Safety Specifications
Parameters
Agency approvals
cULus, CE, CB, FCC
Information technology Equipment
IEC/EN/UL 60950-1:2006+A11:2009
EMI - Conducted and radiated emission
EN55022, class B (* see note)
Harmonic Current Emissions
IEC/EN 61000-3-2, Class A
Voltage fluctuations and flicker
IEC/EN 61000-3-3, (EN60555-3)
Electrostatic Discharge Immunity
IEC 61000-4-2
Standards
RF, Electromagnetic Field Immunity
Electrical Fast Transient/Burst Immunity
IEC 61000-4-3
IEC 61000-4-4
Surge Immunity (1KV)
IEC 61000-4-5(SAZ:Level2,SBAZ:Level 1)
RF, Conducted Disturbance Immunity
IEC 61000-4-6
Power frequency Magnetic Field Immunity
IEC 61000-4-8
Voltage dips, Short Interruptions Immunity
IEC 61000-4-11
FCC part 15 Subpart B, Class B, ANSI C63.4 :2003
* Note: for 528VAC models to meet the EN55022 class B spec an external 0.33uF X capacitor is needed to be installed between AC L and AC N as close
as possible to the input of the power supply itself
Pin Out Specifications*
Pin Single
1* AC Input (N) or (L1)
2* AC Input (L) or (L2)
3 -V Output
4 +V Output
* Note: Input Pins 1 and 2 can be “N” and "L" respectively when the input voltage is supplied from a single phase.
Input Pins 1 and 2 can be “L1” and "L2" respectively when the input voltage is supplied from 3 phase line to line voltage 208-480Vac (208 Y/ 120V 3-phase,
240 Y/ 120V 3-phase, 400 Y/ 230V 3-phase or 480 Y/ 277V 3-phase).
www.aimtec.com
F 052e R8.I
Tel: +1 514 620 2722
2 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only



No Preview Available !

Derating
Series AME3-AZ
3Watt | AC-DC Converter
Derating at 50°C for AME3-xxSBAZ models
Derating at 55°C for AME3-xxSAZ models
Dimensions
15.24
(0.60)
1
35.60
(1.40)
Top View
3
4
7.60
(0.29)
23.31
(0.92)
(0.65)
Top View
1 Te mperat urem easuringpoint 3
4
11.655
(0.46)
2
28.00
(1.10)
19.32
(0.76)
Side View
  
 
6.00
(0.24)
2
DIV: 5.00(0.20)
Ø 10.0 ( Ø 0.40)
Ø 0.60 ( Ø 0.02)
Dimensions mm (inch)
Case Tolerance ±0.50 (±0.02)
Pin Diameter ±0.05 (±0.002)
Pin Pitch Tolerance ±0.50 (±0.02)
0.60
(0.02)
NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled
by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the
date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,
nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components
and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This
product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate
specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com.
www.aimtec.com
F 052e R8.I
Tel: +1 514 620 2722
3 of 3
Toll free: + 1 888 9 AIMTEC
(924 6832)
North America only



AME3-AZ datasheet pdf
Download PDF
AME3-AZ pdf
View PDF for Mobile


Related : Start with AME3-A Part Numbers by
AME3-AZ AC-DC Converter AME3-AZ
AIMTEC
AME3-AZ pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact