AD1934 Datasheet PDF - Analog Devices


www.Datasheet-PDF.com

AD1934
Analog Devices

Part Number AD1934
Description 8-Channel DAC
Page 28 Pages

AD1934 datasheet pdf
View PDF for PC
AD1934 pdf
View PDF for Mobile


No Preview Available !

www.DataSheet4U.com
FEATURES
PLL generated or direct master clock
Low EMI design
108 dB DAC dynamic range and SNR
−94 dB THD + N
Single 3.3 V supply
Tolerance for 5 V logic inputs
Supports 24 bits and 8 kHz to 192 kHz sample rates
Single-ended DAC output
Log volume control with autoramp function
SPI® controllable for flexibility
Software-controllable clickless mute
Software power-down
Right-justified, left-justified, I2S and TDM modes
Master and slave modes up to 16-channel in/out
48-lead LQFP
APPLICATIONS
Automotive audio systems
Home theater systems
Set-top boxes
Digital audio effects processors
8-Channel DAC with PLL,
192 kHz, 24 Bits
AD1934
GENERAL DESCRIPTION
The AD1934 is a high performance, single-chip that provides
eight digital-to-analog converters (DACs) with single-ended
output using the Analog Devices, Inc. patented multibit sigma-
delta (Σ-Δ) architecture. An SPI port is included, allowing a
microcontroller to adjust volume and many other parameters.
The AD1934 operates from 3.3 V digital and analog supplies.
The AD1934 is available in a 48-lead (single-ended output)
LQFP. Other members of this family include a differential DAC
output and I2C® control port version.
The AD1934 is designed for low EMI. This consideration is
apparent in both the system and circuit design architectures.
By using the on-board PLL to derive the master clock from the
LR clock or from an external crystal, the AD1934 eliminates the
need for a separate high frequency master clock and can also be
used with a suppressed bit clock. The digital-to-analog
converters are designed using the latest ADI continuous time
architectures to further minimize EMI. By using 3.3 V supplies,
power consumption is minimized, further reducing emissions.
FUNCTIONAL BLOCK DIAGRAM
DIGITAL AUDIO
INPUT/OUTPUT
AD1934
SERIAL
DATA
PORT
CLOCKS
SDATAIN
TIMING MANAGEMENT
AND CONTROL
(CLOCK AND PLL)
DIGITAL
FILTER
AND
VOLUME
CONTROL
DAC
DAC
DAC
DAC
DAC
DAC
DAC
DAC
PRECISION
VOLTAGE
REFERENCE
CONTROL PORT
I2C/SPI
6.144MHz
CONTROL DATA
INPUT/OUTPUT
Figure 1.
ANALOG
AUDIO
OUTPUTS
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2007 Analog Devices, Inc. All rights reserved.



No Preview Available !

www.DataSheet4U.com
AD1934
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Test Conditions............................................................................. 3
Analog Performance Specifications ........................................... 3
Crystal Oscillator Specifications................................................. 4
Digital Input/Output Specifications........................................... 4
Power Supply Specifications........................................................ 5
Digital Filters................................................................................. 6
Timing Specifications .................................................................. 6
Absolute Maximum Ratings............................................................ 8
Thermal Resistance ...................................................................... 8
ESD Caution.................................................................................. 8
Pin Configuration and Function Descriptions............................. 9
Typical Performance Characteristics ........................................... 11
Theory of Operation ...................................................................... 12
REVISION HISTORY
6/07—Revision 0: Initial Version
Digital-to-Analog Converters (DACs) .................................... 12
Clock Signals............................................................................... 12
Reset and Power-Down ............................................................. 12
Serial Control Port ..................................................................... 13
Power Supply and Voltage Reference....................................... 14
Serial Data Ports—Data Format............................................... 14
Time-Division Multiplexed (TDM) Modes............................ 14
Daisy-Chain Mode ..................................................................... 16
Control Registers ............................................................................ 20
Definitions................................................................................... 20
PLL and Clock Control Registers............................................. 20
DAC Control Registers .............................................................. 21
Auxiliary TDM Port Control Registers ................................... 23
Additional Modes....................................................................... 23
Application Circuits ....................................................................... 25
Outline Dimensions ....................................................................... 26
Ordering Guide .......................................................................... 26
Rev. 0 | Page 2 of 28



No Preview Available !

www.DataSheet4U.com
AD1934
SPECIFICATIONS
TEST CONDITIONS
Performance of all channels is identical, exclusive of the interchannel gain mismatch and interchannel phase deviation specifications.
Supply Voltages (AVDD, DVDD)
Temperature Range1
Master Clock
Input Sample Rate
Measurement Bandwidth
Word Width
Load Capacitance (Digital Output)
Load Current (Digital Output)
Input Voltage HI
Input Voltage LO
3.3 V
As specified in Table 1 and Table 2
12.288 MHz (48 kHz fS, 256 × fS mode)
48 kHz
20 Hz to 20 kHz
24 bits
20 pF
±1 mA or 1.5 kΩ to ½ DVDD supply
2.0 V
0.8 V
1 Functionally guaranteed at −40°C to +125°C case temperature.
ANALOG PERFORMANCE SPECIFICATIONS
Specifications guaranteed at 25°C (ambient).
Table 1.
Parameter
DIGITAL-TO-ANALOG CONVERTERS
Dynamic Range
No Filter (RMS)
With A-Weighted Filter (RMS)
With A-Weighted Filter (Average)
Total Harmonic Distortion + Noise
Single-Ended Version
Full-Scale Output Voltage
Gain Error
Interchannel Gain Mismatch
Offset Error
Gain Drift
Interchannel Isolation
Interchannel Phase Deviation
Volume Control Step
Volume Control Range
De-emphasis Gain Error
Output Resistance at Each Pin
REFERENCE
Internal Reference Voltage
External Reference Voltage
Common-Mode Reference Output
Conditions/Comments
20 Hz to 20 kHz, −60 dB input
0 dBFS
Two channels running
Eight channels running
FILTR pin
FILTR pin
CM pin
Min Typ
Max Unit
98 104
100 106
108
−92
−86
0.88 (2.48)
−10
−0.2
−16 −4
−30
100
0
0.375
95
100
1.50
1.32 1.50
1.50
dB
dB
dB
dB
−75 dB
V rms (V p-p)
+10 %
+0.2 dB
+16 mV
+30 ppm/°C
dB
Degrees
dB
dB
±0.6 dB
Ω
V
1.68 V
V
Rev. 0 | Page 3 of 28



No Preview Available !

www.DataSheet4U.com
AD1934
Specifications measured at 130°C (case).
Table 2.
Parameter
DIGITAL-TO-ANALOG CONVERTERS
Dynamic Range
No Filter (RMS)
With A-Weighted Filter (RMS)
With A-Weighted Filter (Average)
Total Harmonic Distortion + Noise
Single-Ended Version
Full-Scale Output Voltage
Gain Error
Interchannel Gain Mismatch
Offset Error
Gain Drift
REFERENCE
Internal Reference Voltage
External Reference Voltage
Common-Mode Reference Output
Conditions/Comments
20 Hz to 20 kHz, −60 dB input
0 dBFS
Two channels running
Eight channels running
FILTR pin
FILTR pin
CM pin
Min Typ
Max Unit
98 104
100 106
108
−92
−86
0.8775 (2.482)
−10
−0.2
−16 −4
−30
1.50
1.32 1.50
1.50
dB
dB
dB
dB
−70 dB
V rms (V p-p)
+10 %
+0.2 dB
+16 mV
+30 ppm/°C
V
1.68 V
V
CRYSTAL OSCILLATOR SPECIFICATIONS
Table 3.
Parameter
Transconductance
Min Typ Max
3.5
Unit
Mmhos
DIGITAL INPUT/OUTPUT SPECIFICATIONS
−40°C < TA < +130°C, DVDD = 3.3 V ± 10%.
Table 4.
Parameter
Input Voltage HI (VIH)
Input Voltage HI (VIH)
Input Voltage LO (VIL)
Input Leakage
High Level Output Voltage (VOH)
Low Level Output Voltage (VOL)
Input Capacitance
Conditions/Comments
MCLKI pin
IIH @ VIH = 2.4 V
IIL @ VIL = 0.8 V
IOH = 1 mA
IOL = 1 mA
Min Typ Max Unit
2.0 V
2.2 V
0.8 V
10 μA
10 μA
DVDD − 0.60
V
0.4 V
5 pF
Rev. 0 | Page 4 of 28




AD1934 datasheet pdf
Download PDF
AD1934 pdf
View PDF for Mobile


Similiar Datasheets : AD1928 AD1933 AD1934 AD1935 AD1936 AD1937 AD1938 AD1939 AD1940 AD1941 AD1941 AD194TW AD1953 AD1954 AD1955 AD1958 AD1959 AD1970 AD1974 AD1980 AD1980 AD1981A AD1981B AD1981BL AD1981HD AD1983 AD1984 AD1985 AD1986 AD1986A

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact