80C196MH Datasheet PDF - Intel Corporation

www.Datasheet-PDF.com

80C196MH
Intel Corporation

Part Number 80C196MH
Description INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER
Page 30 Pages


80C196MH datasheet pdf
Download PDF
80C196MH pdf
View PDF for Mobile

No Preview Available !

www.DataSheet4U.com
®
8XC196MH INDUSTRIAL MOTOR CONTROL
CHMOS MICROCONTROLLER
High Performance CHMOS 16-bit CPU
16 MHz Operating Frequency
32 Kbytes of On-chip OTPROM/ROM
744 Bytes of On-chip Register RAM
Register-to-register Architecture
16 Prioritized Interrupt Sources
Peripheral Transaction Server (PTS) with 15
Prioritized Sources
Up to 52 I/O Lines
3-phase Complementary Waveform Generator
8-channel 8- or 10-bit A/D with Sample and
Hold
2-channel UART
Event Processor Array (EPA) with 2 High-
speed Capture/Compare Modules and 4 High-
speed Compare-only Modules
Two Programmable 16-bit Timers with
Quadrature Counting Inputs
Two Pulse-width Modulator (PWM) Outputs
with High Drive Capability
Flexible 8- or 16-bit External Bus
1.75 µs 16 × 16 Multiply
3 µs 32/16 Divide
Extended Temperature Available
Idle and Powerdown Modes
Watchdog Timer
The 8XC196MH is a member of Intel’s family of 16-bit MCS® 96 microcontrollers. It is designed primarily to
control three-phase AC induction and DC brushless motors. It features an enhanced three-phase waveform
generator specifically designed for use in “inverter” motor-control applications. This peripheral provides pulse-
width modulation and three-phase sine wave generation with minimal CPU intervention. It generates three
complementary non-overlapping PWM pulses with resolutions of 0.125 µs (edge triggered) or 0.250 µs
(centered).
The 8XC196MH has two dedicated serial port peripherals, allowing less software overhead. The watchdog timer
can be programmed with one of four time options.
The 8XC196MH is available as the 80C196MH, which does not have on-chip ROM, the 87C196MH,
which contains 32 Kbytes of on-chip OTPROM* or factory programmed ROM, and the 83C196MH, which
contains 32 Kbytes of factory programmed MASK ROM. It is available in 84-lead PLCC, 80-lead Shrink EIAJ/QFP,
and 64-lead SDIP. The 64-lead package does not contain pins for the P5.1/INST and P6.7/PWM1 signals.
Operational characteristics are guaranteed over the temperature range of – 40°C to + 85°C.
*One-Time Programmable Read-Only Memory (OTPROM) is similar to EPROM but comes in an unwindowed package and
cannot be erased. It is user programmable.
Intel Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in an Intel product. No other circuit patent
licenses are implied. Information contained herein supersedes previously published specifications on these devices from Intel.
© INTEL CORPORATION, 2004
August 2004
Order Number: 272543-003



No Preview Available !

8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER
®
CPU
8/10-Bit
A/D
Converter
744
Byte
Register
File
24 Bytes
CPU SFRs
S/H
RALU
Microcode
Engine
16
Interrupt
Controller
32K
On-chip
ROM/
OTPROM
8
Peripheral
Transaction
Server
Memory
Controller
Queue
8
8 Watchdog
Timer
Port 5
Control
Signals
Port 3
AD7:0
Port 4
AD15:8
Mux
8
A/D
Port 0
Port 0
Baud
Rate
Generator
SIO 0
SIO 1
Timer 1
Timer 2
Event
Processor
Array
4
2
Port 1
6
Port 2
3-Phase
Waveform
Generator
PWM0
PWM1
62
Port 6
48
Port 1
Serial I/O
Port 2
SIO, EPA
2 Capture/Compare
4 Compare
EXTINT
8
Port 6
Waveform
Generator
A2542-01
Figure 1. 8XC196MH Block Diagram
2



No Preview Available !

® 8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER
PROCESS INFORMATION
This device is manufactured on PX29.5, a CHMOS IV
process. Additional process and reliability information
is available in Intel’s Components Quality and
Reliability Handbook (order number 210997).
All thermal impedance data is approximate for static
air conditions at 1 watt of power dissipation. Values
will change depending on operating conditions and
the application. The Intel Packaging Handbook (order
number 240800) describes Intel’s thermal impedance
test methodology.
Table 1. Thermal Characteristics
Package Type
84-lead PLCC
80-lead QFP
64-lead SDIP
θJA
33°C/W
56°C/W
56°C/W
θJC
11°C/W
12°C/W
N/A
X XX 8 X C 196 XX XX
Device Speed:
Product Family:
No Mark = 16 MHz
Kx, Mx, Nx
CHMOS Technology
Program Memory Options:
0 = ROMless, 3 = ROM, 7 = OTPROM
Package - Type Options:
Temperature and Burn In Options:
x = SDIP, x = PLCC, x = QFP
x = –40˚C – +85˚C Ambient
with Intel Standard Burn-In
A2759-01
Figure 2. The 8XC196MH Family Nomenclature
NOTE: To address the fact that many of the package prefix variables have changed,
all package prefix variables in this document are now indicated with an "x".
3



No Preview Available !

8XC196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER
®
Table 2. 8XC196MH Memory Map
Address
(1)
Description
Notes
0FFFFH
0A000H
External Memory
09FFFH
02080H
Internal ROM/OTPROM or External Memory
0207FH
0205EH
Reserved
1, 2
0205DH
02040H
PTS Vectors
0203FH
02030H
Interrupt Vectors (upper)
0202FH
02020H
ROM/OTPROM Security Key
0201FH
0201CH
Reserved
1, 2
0201BH Reserved (must contain 20H)
0201AH CCB1
02019H Reserved (must contain 20H)
02018H CCB0
02017H
02014H
Reserved
02013H
02000H
Interrupt Vectors (lower)
01FFFH
01F00H
Internal SFRs
1
1EFFH
300H
External Memory
2FFH
18H
Register RAM
3
17H
00H
CPU SFRs
1
NOTES:
1. Unless otherwise noted, write 0FFH to reserved memory locations and write 0 to reserved SFR bits.
2. WARNING: The contents and/or function of reserved locations may change with future revisions of the
device.
3. Code executed in locations 0000H to 02FFH will be forced external.
4



80C196MH datasheet pdf
Download PDF
80C196MH pdf
View PDF for Mobile


Related : Start with 80C196M Part Numbers by
80C196MC Industrial Motor Control Microcontroller 80C196MC
Intel Corporation
80C196MC pdf
80C196MH INDUSTRIAL MOTOR CONTROL CHMOS MICROCONTROLLER 80C196MH
Intel Corporation
80C196MH pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact