3000-xxxx Datasheet PDF - 3M

www.Datasheet-PDF.com

3000-xxxx
3M

Part Number 3000-xxxx
Description Angle Header
Page 7 Pages


3000-xxxx datasheet pdf
Download PDF
3000-xxxx pdf
View PDF for Mobile


No Preview Available !

3MFour-Wall Header
.100” × .100” Latch/Ejector, Straight and Right Angle
3000 Series
www.DataSheet4U.com
Military (with 3M’s 3518 & N3518 polarizing key)
and centerbump polarization
Optional ejector latches
Mounting holes for securing header to board
Optional polarizing posts available
High temperature insulator option suitable for “no
lead” soldering operations
High temperature option suitable for reflow soldering
using “paste in hole” techniques
Solder tail option
See Regulatory Information Appendix for chemical
compliance information
Date Modified: May 19, 2009
TS-0772-J
Sheet 1 of 4
Physical
Insulator:
Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT) - (High Temp Option)
Flammability: UL 94V-0
Color: Gray (PBT), Beige (PCT), Black (PCT)
Contact:
Material: Copper Alloy
Plating:
Underplating: Nickel - Overall (See Ordering Information)
Wiping Area: 30 µ” [ 0.76 µm ] Gold
Solder Tails: Tin Lead or Matte Tin (See Ordering Information)
Marking: 3M Logo, Part Identification Number and Orientation Triangle
Electrical
Current Rating: 2 A (EIA 364-70)
Insulation Resistance: >1 × 109 Ω at 500 VDC
Withstanding Voltage: 1,000 VRMS at Sea Level
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: 260°C - (High Temp PCT insulator verson), single pass, (profile per J-STD-020C)
(PBT insulator version), maximum insulator temperature 191°C (solder wave
processonly)
Moisture Sensitivity Level: 1 (per J-STD-020C) High Temp. (PCT) versions only
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373



No Preview Available !

3MFour-Wall Header
.100” × .100” Latch/Ejector, Straight and Right Angle
www.DataSheet4U.com
-X0XX
Header without Latch Ejector
-X2XX
Header with
Short Ejector/Latch
for 3M Sockets without
Strain Relief
.08
[2.0]
.424 ± .010
[ 10.77 ]
.97 Ref
[24.6]
A
3000 Series
-X3XX
Header with
Long Ejector/Latch
for 3M Sockets with
Strain Relief
.08
[2.0]
.573 ± .010
[ 14.55 ]
1.07 Ref
[27.2]
.025 ± .002 Sq Typ
[ 0.64 ]
.24
[6.1]
.020
0.51
.37 Ref
[9.4]
D
.100
2.54
REF.
.46 Ref
[11.7]
.28
7.1
.30
[7.6]
CL Dim. E
“Y”
F Typ
Section A-A
(Straight)
.13
3.3
2X O .100 [2.54]
SEE NOTE #2
.100
2.54
REF.
POSITION #1
B
.025 ± .002 Sq Typ
[ 0.64 ]
Position 1
Orientation
Triangle
.21
[5.3]
Notch A
(See Table 1 & Note1)
Notch B
(See Table 1)
.16
[4.1]
A
Notch C
(See Table 1 & Note 1)
B
.25
6.4
.34
8.6
F Typ
CL “Y”
.24
[6.1]
.30
[7.6]
.68
[17.3]
.35
[8.9]
Dim. E
.049 Ref
[1.24]
.100 Ref
[2.54]
Section B-B
(Right Angle)
.020
[0.51]
2X ø .100
[2.54]
(See Note 2)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
.12
[3.0]
AC
A
B
.197
[5.00]
.20
[5.1]
C
TS-0772-J
Sheet 2 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373



No Preview Available !

3MFour-Wall Header
.100” × .100” Latch/Ejector, Straight and Right Angle
www.DataSheet4U.com
Pin Qty
3M Part
Number
A
Table 1
Dimensions
B
C
Polarizing
D Notches
10
3793
1.265 (32.13)
1.104 (28.04)
0.865 (21.97)
0.705 (17.91)
BC
14
3314
1.465 (37.21)
1.304 (33.12)
1.065 (27.05)
0.905 (22.99)
BC
16
3408
1.565 (39.75)
1.404 (35.66)
1.165 (29.59)
1.005 (25.53)
ABC
20
3428
1.765 (44.83)
1.604 (40.74)
1.365 (34.67)
1.205 (30.61)
ABC
24
3627
1.965 (49.91)
1.804 (45.82)
1.565 (39.75)
1.405 (35.69)
ABC
26
3429
2.065 (52.45)
1.904 (48.36)
1.665 (42.29)
1.505 (38.23)
ABC
30
3440
2.265 (57.53)
2.104 (53.44)
1.865 (47.37)
1.705 (43.31)
ABC
34
3431
2.465 (62.61)
2.304 (58.52)
2.065 (52.45)
1.905 (48.39)
ABC
40
3432
2.765 (70.23)
2.604 (66.14)
2.365 (60.07)
2.205 (56.01)
ABC
50
3433
3.265 (82.93)
3.104 (78.84)
2.865 (72.77)
2.705 (68.71)
ABC
60
3372
3.765 (95.63)
3.604 (91.54)
3.365 (85.47)
3.205 (81.41)
ABC
64
3764
3.965 (100.71)
3.804 (96.62)
3.565 (90.55)
3.405 (86.49)
ABC
3M Part
Number Suffix
Contact Tail
Dim E
Table 2
Pin Cross Section
Dim G
-5XX2
-6XX2
-5XO3
-6XO3
Solder Tail for
.062 (1.57)
Thick PC Board
Solder Tail for 0.94
(2.39) to .125 (3.18)
Thick PC Board
.112 ± .010
(2.84)
.155 ± .010
(3.94)
Dim F
.0245 ± .0005
(0.622)
.0245 ± .0005
(0.622)
Diagonals
.028 ± .001
(0.71)
.028 ± .001
(0.71)
Corner Radii
.0075 Ref
(0.191)
.0075 Ref
(0.191)
0.035 ± .003
(0.89) (See Note 3)
0.035 ± .003 (0.89)
3000 Series
Inch
(mm)
Tolerance Unless Noted
.0 .00 .000
Inch ± .1 ± .01 ± .005
[ ] Dimensions for
Reference only
ø.106 or ø.116
[2.69]
[2.95]
.300 (See Note 2)
[7.62]
Side to Side Stackability Dim G
ø.106 or ø.116
[2.69]
[2.95]
.41
[10.4]
(See Note 2)
Max to Edge of PCB
for Daisy Chain
Dim G
“Y” CL
"Y" CL
.060
[1.52]
Position 1
.100 ± .003
[2.54]
.100 ± .003
[2.54]
.352
[8.94]
B
Recommended Mounting Hole Pattern
(Straight)
.029
[0.74]
.100 ± .003
[2.54]
Position 1
.100 ± .003
[2.54]
.232
[5.89]
C
Recommended Mounting Hole Pattern
(Right Angle)
Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or #N3518).
2. Mounting hardware: From solder side of pc board use #4-24 thread cutting screw (3M Part # 3341-5) and .116 [2.95] dia mounting hole. For right angle
version only, #2-56 bolt and nut (3M Part # 3341-6) with .106 [2.69] dia mounting hole may be used.
3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 ± .002. See page 4 for kink position details (K2
version).
4. Contact your 3M sales representative for custom requirements.
Ordering Information
X3XXX-XXXXXX
Blank = Std. Temp Gray (PBT) /(Blank or UB Pltg. Req’d.)
N = High Temp Beige (PCT) /(Blank or UB Pltg. Req’d.)
N = High Temp Black (PCT)/(RB Plating Req’d)
3M Part Number
(See Table 1)
Pin Configuration
5 = Right Angle Solder Tails
6 = Straight Solder Tails
Latch/Ejector System
0 = No Latch/Ejector installed
2 = Short Roll Pin Latch/Ejectors
3 = Long Roll Pin Latch/Ejectors
5 = Short, Snap-In Latch/Ejectors
6 = Long, Snap-In Latch/Ejectors
Plating
RB = 30 μ” [ 0.76 μm ] Gold and 200 μ” [ 5.08 μm ] Matte Tin
over 100 μ” [ 2.54 μm ] Nickel (App. E1 & C1 Apply)
Blank or UB = 30 μ” (0.76 μm ] Gold and 200 μ” [ 5.08 μm ]
Tin Lead over 100 μ” [ 2.54 μm ] Nickel (App. E3 & C2 Apply)
Tail
02 = for .062 [1.57] thick board
03 = for .094 to .125 [2.39 to 3.18] thick board
K2 = kinked for .062 [1.57] thick board
TS-0772-J
Sheet 3 of 4
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373



No Preview Available !

3MFour-Wall Header
.100” × .100” Latch/Ejector, Straight and Right Angle
www.DataSheet4U.com
Part Customization
This spec sheet details our standard offering.
3M has several capabilities that can provide a part tailored
to your specific needs. Ask your 3M sales representative
or customer service for more details.
.318
[8.08]
.100 Dia
[2.54]
Polarizing Post
3000 Series
3201-4
3201-5
LCP
PBT
Black
Gray
Both snap in and roll pin latches may be ordered sepa-
rately. Snap in and roll style latches are dimensionally and
functionally equivalent. If ordering snap-in or roll pin style
latches separately, please use the below chart.
Standard Temperature
(PBT)
High Temperature
(PCT)
High Temperature
(PCT)
High Temperature
(PPA)
High Temperature
(PPA)
High Temperature
(PPA)
Short Latch Long Latch Latch Style Color
3505-2
3505-3
Roll Pin
Gray
N3505-2
N3505-3 Roll Pin
Beige
N3505-2B N3505-3B Roll Pin
Black
3505-30
3505-31
Snap-In
Gray
N3505-30 N3505-31 Snap-In
Beige
N3505-30B N3505-31B Snap-In
Black
Selective pin removal (ATA or other compatability)
Wire wrap tails styles
Note: Insert Post into one mounting hardware hole on bottom of header.
Set post to protrude .115” [2.92].
2500 & 3000 Series Shrouded Header
Total Number
of Pins
Number of
Tails Kinked
Positions Kinked
10 4 3 4 7 8
14 4 3 4 11 12
16 4 3 4 13 14
20 4 3 4 17 18
24 4 3 4 21 22
26 4 3 4 23 24
30 4 5 6 25 26
34 4 7 8 27 28
36 4 7 8 27 28
40 4 7 8 33 34
50 4 7 8 43 44
60 4 11 12 49 50
64 4 11 12 53 54
Kinked Tail Detail:
Kink is located .05” below bottom surface of plastic.
External radius of kink toward part centerline.
Mounting Hardware
3341-5
(Installed from bottom of board)
3341-6
(Must be inserted prior to latch on
vertical headers)
.31
[7.9]
.50
[12.7]
Polarizing Keys
N3518
3518
LCP
PBT
Black
Gray
Dim A
.02
.02
Panhead Thread Cutting Screw:
#4-24 X 5/16”
Type: USA Std BT, Federal BG
Hex Head Bolt, Nut and Washer
Bolt - #2-56 X 1/2”
3341-5 & 6
Material - Stainless Steel
Breakaway Tab
.34 Ref
[8.6]
.15
[3.8]
A
Note: #2216 B/A Scotchweld can be used to adhere keys.
.09
[2.3]
3
Electronic Solutions Division
Interconnect Solutions
http://www.3M.com/interconnects/
TS-0772-J
Sheet 4 of 4
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373



3000-xxxx datasheet pdf
Download PDF
3000-xxxx pdf
View PDF for Mobile


Related : Start with 3000-xxx Part Numbers by
3000-xxxx Angle Header 3000-xxxx
3M
3000-xxxx pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact