2SD330 Datasheet PDF - Sanyo Semicon Device


www.Datasheet-PDF.com

2SD330
Sanyo Semicon Device

Part Number 2SD330
Description PNP/NPN Triple Diffused Planar Silicon Transistors
Page 3 Pages

2SD330 datasheet pdf
View PDF for PC
2SD330 pdf
View PDF for Mobile


No Preview Available !

Ordering number:397E
PNP/NPN Triple Diffused Planar Silicon Transistors
2SB514/2SD330
50V/2A Low-Frequency Power Amplifier
Applications
Features
· Especially suited for use in output stage of 10W AF
Power amplifier.
· Complementary pair with the 2SB514 and 2SD313.
Package Dimensions
unit:mm
2010C
[2SB514/2SD330]
( ) : 2SB514
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Collector Dissipation
Symbol
VCBO
VCEO
VEBO
IC
ICP
PC
Junction Temperature
Tj
Storage Temperature
Tstg
Electrical Characteristics at Ta = 25˚C
Tc=25˚C
Conditions
Parameter
Symbol
Conditions
Collector Cutoff Current
ICBO VCB=(–)20V, IE=0
Emitter Cutoff Current
IEBO VEB=(–)4V, IC=0
DC Current Gain
hFE1 VCE=(–)2V, IC=(–)1A
hFE2 VCE=(–)2V, IC=(–)0.1A
Gain-Bandwidth Product
fT VCE=(–)5V, IC=(–)0.5A
Collector-to-Emitter Saturation Voltage
VCE(sat) IC=(–)2A, IB=(–)0.2A
Base-to-Emitter Voltage
VBE
IC=(–)1A, VCE=–(–)5V
* : The 2SB514/2SD330 are classified by 1A hFE as follows :
40 C 80 60 D 120 100 E 200 160 F 320
JEDEC : TO-220AB
EIAJ : SC-46
1 : Base
2 : Collector
3 : Emitter
Ratings
(–)50
(–)50
(–)5
(–)2
(–)5
1.75
20
150
–55 to +150
Unit
V
V
V
A
A
W
W
˚C
˚C
Ratings
min typ
40*
35
8
max
(–)0.1
(–)1.0
320*
(–)1.0
(–)1.5
Unit
mA
mA
MHz
V
V
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
91098HA (KT)/5231MH/3257TA/7193KI, TS(KOTO) No.397–1/3



No Preview Available !

2SB514/2SD330
No.397–2/3



No Preview Available !

2SB514/2SD330
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any and all SANYO products described or contained herein fall under strategic
products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan, such products must not be exported without obtaining export license from the Ministry of
International Trade and Industry in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 1998. Specifications and information herein are
subject to change without notice.
PS No.397–3/3




2SD330 datasheet pdf
Download PDF
2SD330 pdf
View PDF for Mobile


Similiar Datasheets : 2SD30 2SD311 2SD313 2SD313 2SD313 2SD313 2SD313 2SD313 2SD313 2SD313 2SD313 2SD313 2SD314 2SD315 2SD315A 2SD317 2SD317A 2SD318 2SD318A 2SD325 2SD325 2SD325 2SD328 2SD330 2SD330 2SD331 2SD334 2SD348 2SD350A 2SD352

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Privacy Policy + Contact