Engineering Evaluation Kits
Expanded Cable and Connector
EMI Suppressor Kit
Part Number 0199000005
This is our most popular engineering kit. As the name
implies, this kit provides a broad sampling of suppres-
sion cores, specifically designed to attenuate EMI
between all types of cable connected systems. To
assemble the split cable suppression cores, polypro-
pylene cases and steel clips are included in this kit.
Snap-It Cable Suppressor Kit
Part Number 0199000017
This kit contains six sets of round cable snap-its in two
of our materials; the high resistivity NiZn 44 material
and the new recently introduced MnZn 31 material.
Either material in these round cable snap-its can be
used to suppress frequencies up to 500 MHz.
The round cable snap-its can accommodate round
cables with diameters from .160 to .750 inches
Chip Bead Kit
Part Number 0199000018
This kit contains 20 different chip bead parts in
four different EIA standard package sizes. This
kit contains low current, medium current, as well
as high current chip beads. Also included in this
kit are a selection of standard and high signal
EMI Suppression Bead Kit
Part Number 0199000019
This kit contains 20 different EMI suppression beads in
two different materials; 73 and 43 material. The beads
range from a hole diameter of 0.85mm up to 5.0 mm.
Connector Plate Kit
Part Number 0199000020
This kit contains 20 different suppression plates in
high resistivity NiZn 44 material.
Part Number 0199000024
This Kit contains 10 different sizes in materials 78 (for
125 kHz) & 61 (for 13.56 MHz) and is specifically
designed for use in transponders in Radio Frequency
Surface Mount Kit
Part Number 0199000025
This Bookshelf kit contains a combination of 20 differ-
ential and common-mode surface mount beads. Sup-
plied in several sizes and four Fair-Rite materials (73,
43, 44, 61), these beads attenuate conducted EMI
from 1 MHz into the GHz frequencies. These SM
beads have lower dc resistances and higher current
carrying capacities than plated beads.
Wound Bead Kit
Part Number 0199000027
Contains an assortment of 6 and 11 hole beads,
wound in several configurations. These beads in Fair-
Rite's 44 and 61 materials, provide an impedance of
hundreds of ohm over a 5 to 800 MHz frequency
range, with or without a dc bias current of up to 5
Bead-On-Lead EMI Suppressor Kit
Part Number 0199000028
Three popular core sizes in materials 43, 61& 73 are
included in this evaluation kit.
These nine Fair-Rite engineering evaluation kits are
available from Fair-Rite in Wallkill, NY. They can also
be purchased from our distributors.
Please refer to our web site at www.fair-rite.com for a
complete list of our distributors.
Fair-Rite Products Corp. P.O. Box J,One Commercial Row, Wallkill, NY 12589-0288
Phone: (888) FAIR RITE / (845) 895-2055 • FAX: (888) FERRITE / (845) 895-2629 • www.fair-rite.com • E-Mail: firstname.lastname@example.org
(888) 337-7483 Note: (914) Area Code has changed to (845).