14053B Datasheet PDF - ON Semiconductor

www.Datasheet-PDF.com

14053B
ON Semiconductor

Part Number 14053B
Description MC14053B
Page 12 Pages


14053B datasheet pdf
Download PDF
14053B pdf
View PDF for Mobile

No Preview Available !

MC14051B, MC14052B,
MC14053B
www.DataSheet4U.com
Analog
Multiplexers/Demultiplexers
The MC14051B, MC14052B, and MC14053B analog multiplexers
are digitally−controlled analog switches. The MC14051B effectively
implements an SP8T solid state switch, the MC14052B a DP4T, and
the MC14053B a Triple SPDT. All three devices feature low ON
impedance and very low OFF leakage current. Control of analog
signals up to the complete supply voltage range can be achieved.
Features
Triple Diode Protection on Control Inputs
Switch Function is Break Before Make
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Analog Voltage Range (VDD − VEE) = 3.0 to 18 V
Note: VEE must be v VSS
Linearized Transfer Characteristics
Low−noise − 12 nV/Cycle, f 1.0 kHz Typical
Pin−for−Pin Replacement for CD4051, CD4052, and CD4053
For 4PDT Switch, See MC14551B
For Lower RON, Use the HC4051, HC4052, or HC4053 High−Speed
CMOS Devices
Pb−Free Packages are Available*
http://onsemi.com
MARKING
DIAGRAMS
PDIP−16 16
P SUFFIX
CASE 648
1
MC140xxBCP
AWLYYWW
SOIC−16
D SUFFIX
CASE 751B
16
140xxB
AWLYWW
1
TSSOP−16
DT SUFFIX
CASE 948F
16
14
0xxB
ALYW
1
MAXIMUM RATINGS (Voltages Referenced to VSS)
Symbol
Parameter
Value Unit
VDD DC Supply Voltage Range
(Referenced to VEE, VSS VEE)
−0.5 to
+18.0
V
Vin, Input or Output Voltage Range
−0.5 to VDD V
Vout (DC or Transient) (Referenced to VSS for + 0.5
Control Inputs and VEE for Switch I/O)
Iin Input Current (DC or Transient) per Control Pin
+10
mA
ISW Switch Through Current
± 25 mA
PD Power Dissipation per Package (Note 1)
500 mW
TA Ambient Temperature Range
−55 to +125 °C
Tstg Storage Temperature Range
−65 to +150 °C
TL Lead Temperature (8−Second Soldering)
260 °C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Temperature Derating: Plastic “P and D/DW” Packages: – 7.0 mW/_C From
65_C To 125_C
This device contains protection circuitry to guard against damage due to high
static voltages or electric fields. However, precautions must be taken to avoid
applications of any voltage higher than maximum rated voltages to this
high−impedance circuit. For proper operation, Vin and Vout should be constrained to
the range VSS v (Vin or Vout) v VDD.
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either
VSS, VEE or VDD). Unused outputs must be left open.
SOEIAJ−16
F SUFFIX
CASE 966
16
MC140xxB
AWLYWW
1
xx
A
WL, L
YY, Y
WW, W
= Specific Device Code
= Assembly Location
= Wafer Lot
= Year
= Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
*For additional information on our Pb−Free strategy
and soldering details, please download the
ON Semiconductor Soldering and Mounting
Techniques Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2005
February, 2005 − Rev. 6
1
Publication Order Number:
MC14051B/D



No Preview Available !

MC14051B, MC14052B, MC14053B
MC14051B
8−Channel Analog
Multiplexer/Demultiplexer
MC14052B
Dual 4−Channel Analog
Multiplexer/Demultiplexer
MC14w05w3wB.DataSheet4U.com
Triple 2−Channel Analog
Multiplexer/Demultiplexer
CONTROLS
SWITCHES
IN/OUT
6
11
10
9
13
14
15
12
1
5
2
4
INHIBIT
A
B
C
X0
X1
X2
X
X3
X4
X5
X6
X7
3
COMMON
OUT/IN
CONTROLS
SWITCHES
IN/OUT
6
10
9
12
14
15
11
1
5
2
4
INHIBIT
A
BX
X0
X1
X2
X3
Y0
Y1 Y
Y2
Y3
13
COMMONS
OUT/IN
3
CONTROLS
SWITCHES
IN/OUT
6
11
10
9
12
13
2
1
5
3
INHIBIT
AX
B
C
X0 Y
X1
Y0
Y1
Z0 Z
Z1
VDD = PIN 16
VSS = PIN 8
VEE = PIN 7
VDD = PIN 16
VSS = PIN 8
VEE = PIN 7
VDD = PIN 16
VSS = PIN 8
VEE = PIN 7
Note: Control Inputs referenced to VSS, Analog Inputs and Outputs reference to VEE. VEE must be VSS.
14
15 COMMONS
OUT/IN
4
MC14051B
X4 1
X6 2
16 VDD
15 X2
X3
14 X1
X7 4
13 X0
X5 5
12 X3
INH 6
11 A
VEE 7
VSS 8
10 B
9C
PIN ASSIGMENT
MC14052B
Y0 1
Y2 2
16 VDD
15 X2
Y3
14 X1
Y3 4
13 X
Y1 5
12 X0
INH 6
11 X3
VEE 7
VSS 8
10 A
9B
MC14053B
Y1 1
Y0 2
16 VDD
15 Y
Z1 3
14 X
Z4
13 X1
Z0 5
12 X0
INH 6
11 A
VEE 7
VSS 8
10 B
9C
http://onsemi.com
2



No Preview Available !

MC14051B, MC14052B, MC14053B
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎELECTRICAL CHARACTERISTICS
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCharacteristic
Symbol VDD
Test Conditions
www.DataSheet4U.com
− 55_C
25_C
125_C
Min Max Min Typ Max Min Max Unit
(Note 2)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSUPPLY REQUIREMENTS (Voltages Referenced to VEE)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPower Supply Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎRange
VDD
− VDD – 3.0 VSS VEE
3.0 18 3.0
18 3.0 18 V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎQuiescent Current Per
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPackage
IDD 5.0 Control Inputs:
− 5.0 −
10 Vin = VSS or VDD,
− 10 −
15 Switch I/O: VEE v VI/O v − 20 −
VDD, and DVswitch v
500 mV (Note 3)
0.005 5.0 − 150 mA
0.010 10 − 300
0.015 20 − 600
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎTotal Supply Current
Î(Dynamic Plus
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎQuiescent, Per Package
ID(AV)
5.0 TA = 25_C only (The
10 channel component,
15 (Vin – Vout)/Ron, is
not included.)
Typical
(0.07 mA/kHz) f + IDD
(0.20 mA/kHz) f + IDD
(0.36 mA/kHz) f + IDD
mA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCONTROL INPUTS — INHIBIT, A, B, C (Voltages Referenced to VSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎLow−Level Input Voltage
VIL 5.0 Ron = per spec,
10 Ioff = per spec
15
− 1.5 −
− 3.0 −
− 4.0 −
2.25 1.5 − 1.5 V
4.50 3.0 − 3.0
6.75 4.0 − 4.0
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎHigh−Level Input Voltage
VIH 5.0 Ron = per spec,
10 Ioff = per spec
15
3.5 − 3.5
7.0 − 7.0
11 − 11
2.75
5.50
8.25
− 3.5 −
− 7.0 −
− 11 −
V
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Leakage Current
Iin 15 Vin = 0 or VDD
± 0.1 − ± 0.00001 ± 0.1 − 1.0 mA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInput Capacitance
Cin
−−−
5.0
7.5 −
− pF
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSWITCHES IN/OUT AND COMMONS OUT/IN — X, Y, Z (Voltages Referenced to VEE)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎRecommended
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPeak−to−Peak Voltage
VI/O − Channel On or Off
Into or Out of the Switch
0 VDD
0
− VDD 0 VDD VPP
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎRecommended Static or DVswitch − Channel On
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎDynamic Voltage Across
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎthe Switch (Note 3)
(Figure 5)
0 600 0
− 600 0 300 mV
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOutput Offset Voltage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎON Resistance
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎDON Resistance Between
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎAny Two Channels in the
Same Package
VOO
Ron
DRon
− Vin = 0 V, No Load
5.0 DVswitch v 500 mV
10 (Note 3) Vin = VIL or VIH
15 (Control), and Vin =
0 to VDD (Switch)
5.0
10
15
−−−
− 800 −
− 400 −
− 220 −
− 70 −
− 50 −
− 45 −
10 − − − mV
250 1050 − 1200 W
120 500 − 520
80 280 − 300
25 70 − 135 W
10 50 − 95
10 45 − 65
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOff−Channel Leakage
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCurrent (Figure 10)
Ioff 15 Vin = VIL or VIH
(Control) Channel to
Channel or Any One
Channel
± 100 − ± 0.05 ± 100 − ± 1000 nA
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCapacitance, Switch I/O
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCapacitance, Common O/I
CI/O
CO/I
− Inhibit = VDD
− Inhibit = VDD
(MC14051B)
(MC14052B)
(MC14053B)
−−−
−−−
−−−
−−−
10
60
32
17
− − − pF
pF
−−−
−−−
−−−
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCapacitance, Feedthrough
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(Channel Off)
CI/O
− Pins Not Adjacent
− Pins Adjacent
−−−
−−−
0.15
0.47
− − − pF
−−−
2. Data labeled “Typ” is not to be used for design purposes, but is intended as an indication of the IC’s potential performance.
3. For voltage drops across the switch (DVswitch) > 600 mV ( > 300 mV at high temperature), excessive VDD current may be drawn, i.e. the
current out of the switch may contain both VDD and switch input components. The reliability of the device will be unaffected unless the
Maximum Ratings are exceeded. (See first page of this data sheet.)
http://onsemi.com
3



No Preview Available !

MC14051B, MC14052B, MC14053B
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎELECTRICAL CHARACTERISTICS (Note 4) (CL = 50 pF, TA = 25_C) (VEE v VSS unless otherwise indicatedw)ww.DataSheet4U.com
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCharacteristic
Symbol
VDD – VEE
Vdc
Typ (Note 5)
All Types
Max
Unit
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎPropagation Delay Times (Figure 6)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSwitch Input to Switch Output (RL = 10 kW)
MC14051
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPLH, tPHL = (0.17 ns/pF) CL + 26.5 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPLH, tPHL = (0.08 ns/pF) CL + 11 ns
tPLH, tPHL = (0.06 ns/pF) CL + 9.0 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMC14052
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPLH, tPHL = (0.17 ns/pF) CL + 21.5 ns
tPLH, tPHL = (0.08 ns/pF) CL + 8.0 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPLH, tPHL = (0.06 ns/pF) CL + 7.0 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMC14053
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPLH, tPHL = (0.17 ns/pF) CL + 16.5 ns
tPLH, tPHL = (0.08 ns/pF) CL + 4.0 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎtPLH, tPHL = (0.06 ns/pF) CL + 3.0 ns
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎInhibit to Output (RL = 10 kW, VEE = VSS)
Output “1” or “0” to High Impedance, or
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎHigh Impedance to “1” or “0” Level
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMC14051B
tPLH, tPHL
tPHZ, tPLZ,
tPZH, tPZL
5.0
10
15
5.0
10
15
5.0
10
15
5.0
10
15
ns
35 90
15 40
12 30
ns
30 75
12 30
10 25
ns
25 65
8.0 20
6.0 15
ns
350 700
170 340
140 280
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMC14052B
5.0 300 600 ns
10 155 310
15 125 250
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMC14053B
5.0 275 550 ns
10 140 280
15 110 220
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎControl Input to Output (RL = 10 kW, VEE = VSS)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMC14051B
tPLH, tPHL
5.0
10
15
ns
360 720
160 320
120 240
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMC14052B
5.0 325 650 ns
10 130 260
15 90 180
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎMC14053B
5.0 300 600 ns
10 120 240
15 80 160
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎSecond Harmonic Distortion
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(RL = 10KW, f = 1 kHz) Vin = 5 VPP
− 10 0.07 − %
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎBandwidth (Figure 7)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ(RL = 1 kW, Vin = 1/2 (VDD−VEE) p−p, CL = 50pF
20 Log (Vout/Vin) = − 3 dB)
BW
10
17 − MHz
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎOff Channel Feedthrough Attenuation (Figure 7)
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎRL = 1KW, Vin = 1/2 (VDD − VEE) p−p
fin = 4.5 MHz — MC14051B
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎfin = 30 MHz — MC14052B
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎfin = 55 MHz — MC14053B
− 10 – 50 − dB
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎChannel Separation (Figure 8)
(RL = 1 kW, Vin = 1/2 (VDD−VEE) p−p,
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎfin = 3.0 MHz
− 10 – 50 − dB
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎCrosstalk, Control Input to Common O/I (Figure 9)
(R1 = 1 kW, RL = 10 kW
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎControl tTLH = tTHL = 20 ns, Inhibit = VSS)
− 10 75 − mV
4. The formulas given are for the typical characteristics only at 25_C.
5. Data labelled “Typ” is not lo be used for design purposes but In intended as an indication of the IC’s potential performance.
http://onsemi.com
4



14053B datasheet pdf
Download PDF
14053B pdf
View PDF for Mobile


Related : Start with 14053 Part Numbers by
14053B MC14053B 14053B
ON Semiconductor
14053B pdf

Index :   0   1   2   3   4   5   6   7   8   9   A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   

This is a individually operated, non profit site. If this site is good enough to show, please introduce this site to others.
Since 2010   ::   HOME   ::   Contact